ASSEMBLY INSTRUCTIONS
1
1. Attach the arm frames (C and D) to the leg frames
(A and B) using bolts (EE) and nuts (FF).
2
2. Attach the back frame (F)
seat frame (E) and
crossbars (G and H) to the assembly from step 1 using
screws (BB),
screws (CC), bolts (DD), and washers
(AA) as shown.
A
Lowes.com/allenandroth
FF
WARRANTY
CARE AND MAINTENANCE
• Storage during winter: Wood can shrink and expand depending on the humidity. This furniture has
been manufactured and designed for a summer climate. Do not store this product in centrally heated
rooms, as this will cause the timber to dry out and possibly shrink and crack. Cool, well-ventilated
sheds are the most suitable location.
• After the wood has been in use for a period of time or has dried out, it may be necessary to tighten
(with only moderate torque) the screws. Use a hexagonal wrench.
• The seat coverings can be cleaned with soap and water.
Printed in Vietnam
Lowes.com/allenandroth
allen + roth
®
is a registered trademark
of LF, LLC. All rights reserved.
This outdoor furniture is warranted by the manufacturer to the original purchaser for a period of one
(1) year from the date of purchase, against defects in workmanship and materials only. If your outdoor
furniture fails structurally during normal use within one (1) year of purchase, the manufacturer will
repair or replace the defective piece at its discretion (with the same or similar product if original
product is discontinued) at no charge.
BB
x 12
7 x 35 (head Ø11)
Screw
D
C
Hardware Used
EE
x 4
8 x 55 Bolt
FF
x 4
8 x 18 Nut
Hardware Used
EE
EE
EE
FF
B
AA
x 2
6.5 x 25 x 2 Washer
CC
x 6
7 x 90 Screw
DD
x 2
6 x 45 Bolts
54
H
G
F
AA
CC
CC
E
BB
DD