2. Baxton Studio
  3. BBT5456-Greyish Beige/Walnut-Stool

Baxton Studio BBT5456-Greyish Beige/Walnut-Stool, BBT5456-Dark Grey/Walnut-Stool Assembly Instructions

  • I have reviewed the provided Assembly Instructions for the BBT5456 stool. This document details the steps for assembling the stool, including the necessary hardware and parts. The instructions emphasize the importance of not fully tightening components until all parts are connected. I'm ready to assist you with any questions you may have about the product or the assembly process.
  • What tools are needed for assembly?
    Should I fully tighten the nuts or bolts during assembly?
    What should I avoid during assebly?
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 30mm 1 PC
2 M6 SPRING WASHER 1 PC
3 PAN HEAD SCREW M4 x 16mm(BLACK) 4 PCS
4 M4 ALLEN KEY (BALL SHAPE) 1 PC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Rubber Mallet (not provided).
ASSEMBLY INSTRUCTIONS
MODEL : BBT5456 STOOL 1 OF 2
STEP 1 STEP 2
B
C
4
1
2
B
C
PART LIST
ITEM DESCRIPTION BOX QTY
A CHAIR 1 1 PC
B LEG FRAME (1) 1 1 PC
C LEG FRAME (2) 1 1 PC
ASSEMBLY INSTRUCTIONS 2 OF 2
STEP 3 STEP 4
A
B
C
3
Note : Follow marking line assemble leg.
/