6. Power Amplier Technical Specication
Technical Date
OutputPower 50W(RMS)
FrequencyResponse
Mic:-3dB(100-20KHz)
Line:-3dB(30Hz-20KHz)
THDat1kHz lessthan1%
Inputs
Input1-2Mic:-50dB(2.4mv)/2kΩbalanced
Input3Aux:-10dB(245mv)/5kΩunbalanced
Outputs,Speakers Low-impedanceoutputs(4-8Ω)
Signal-to-NoiseRatio
Mic:>70dB
Line:>80dB
PowerConsumption
DC12V/3A
AC110V/0.5A
PowerSupply 110V(AC50-60Hz)MainsPower&12DC
PowerDraw 30W
Dimension(WxHxD)/Wt. 165x55x200mm/approx.1kg
Disclaimer
You should not alter, modify, copy, or otherwise misappropriate any PyleUSA Electronics product,
whether in whole or in part. Descriptions of electronics features, technical specication and re-
lated information for the product is provided only to illustrate the operation and general use ex-
amples. You are fully responsible for the incorporation, use and operation of your equipment in the
desired application. PyleUSA assumes no responsibility for any losses incurred by you or third par-
ties arising from the use of the product. Only operate the PyleUSA electronic product as described
and suggested -- in accordance, and with respect to the product’s technical specications, power
supply/voltage ratings, and other product characteristics. PyleUSA shall have no liability for mal-
functions or damages stemming from the use of the product beyond the specied and suggested
ranges and applications. Please contact PyleUSA ofces for any questions or information regard-
ing the operation, safety and optimum performance use of your PyleUSA electronics
PyleUSA makes no warranties or representations, either express or implied, with respect to the
accuracy or completeness of the contents of the electronics’ product information. Product data,
features, and/or technical specications may be changed or updated without notice and may con-
tain technical inaccuracies or typographical errors. PyleUSA shall not be liable for damages of any
kind arising out of or in connection with the use of this information and data provided.
4