www.philips.com/welcome
Register your product and get support at
CID3687
EN Quick Start Guide
GPS antenna
Amplifier
Radio antenna
White
White
Red
Red
Brown
Yellow
Black
Yellow Green Blue
Yellow
Blue/white
Pink
Green/white
Gearbox
AV system
AUX
Red
White
Yellow
Touch controller
Rear screen
White/
brown
Orange/
white
Brown/
black
2
a
b
c
3
4
5
English
Connect wires
1
1 Check the car’s wirings carefully, then
connect them to the unit.
Mount in the dashboard
2
1 If the car does not have an on-board drive
or navigation computer, disconnect the
negative terminal of the car battery.
2 Ensure that the horizontal slant of the car
dashboard opening is between 0 and 20
degrees. The unit cannot be used if the
dashboard opening’s slant angle is above 20
degrees.
3 Fix the four plastic buckles (supplied by
the car manufacturer for the original audio
system) to the unit.
a
4 Fix the mounting brackets to the unit with
screws (supplied by the car manufacturer).
b
5 Slide the unit into the dashboard and fi x it
to the car with four screws.
c
6 Reconnect the negative terminal of the car
battery.
Turn on
1
Press and hold /MUTE/VOL to turn on
the unit.
The available OSD (On-Screen Display) »
languages are displayed.
2 Tap a language to select.
To turn off the unit, press and hold •
/
MUTE/VOL .
Set date and time
1
Tap to display main menu.
2 Tap in the middle right side of the screen.
3 Tap [Settings] .
4 Tap [Time] .
Set date
1 Tap [Date] .
2 Tap on the displayed date information.
3 Tap or to set year, month and day.
Set clock mode
1 Tap [Clock mode] .
2 Tap on [12Hr] or [24Hr] to select clock
mode.
Set time
1 Tap [Time] .
2 Tap on the displayed time.
3 Tap or to set hour and minute.
Use map
Note
You may need to upgrade the map (sold •
separately) before using it.
1 Tap the upper left corner to display home
menu.
2 Tap [Navigation] .
The navigation menu is displayed in a »
few seconds.
3 Refer to the map manual to operate the
navigation tool.
Listen to Radio
1
Tap to display home menu.
2 Tap [Radio] .
3 Tap FM or AM to select band:
4 Briefl y tap or to tune to a radio station
by step.
Play disc
3
You can play video, audio or images stored on the
following discs:
DVD video, DVD-R, DVD-RW•
VCD•
Audio CD, CD-R, CD-RW•
1 Insert a disc into the disc slot with the label
side facing up.
Play starts automatically. »
Connect USB device
4
1 Open the AV-IN/USB/SD/MAP socket
cover.
2 Insert the USB device to the USB socket.
Play starts automatically. »
Insert SD/MMC card
5
1 Open the AV-IN/USB/SD/MAP socket
cover.
2 Insert the SD/MMC card into the SD/MMC
card slot.
Play starts automatically. »
Make a call
To connect your Bluetooth device to the unit, you
need to pair the device to the unit.
1 Turn on the Bluetooth function on the
device.
2 Search for Bluetooth device with the
device.
3 Select “CID3687” in the pairing list.
4 Enter default password “0000”.
If pairing succeeds. phone call record is »
displayed.
5 Tap or to select the paired phone, then
tap
.
6 Tap or to search for phone number
from the following list:
• [Missed calls]
• [Received calls]
• [Dialed calls]
• [Phone book]
• [Sim phone book]
• [Local phone book]
Or tap
to dial number directly, then tap
to dial.
Receive call
By default, all incoming calls are received
automatically.
1 If there is incoming call, [Incoming call...]
fl ashes on the screen. Speak into the
Bluetooth microphone.
2 When conversation ends, tap (red) to
terminate the call.
© 2010 Koninklijke Philips Electronics N.V.
All rights reserved.
CID3687_00_QSG_V1.0
/
