Acer K330 Quick start guide

Category
Cable interface/gender adapters
Type
Quick start guide
INSTALLATION
INTERFACE CONNECTOR
Note: Connector interface is subject to model’s specifications
USB
11
iPod/iPhone/iPad battery charging
iPod/iPhone/iPad
7
6
DVD player
HDMI
HDMI
5
D-Sub
D-Sub
2
10
SD CARD
9
DVD player,
Set-top Box,
HDTV receiver
R B G
8
R B G
R
B G
3
4
HDTV adapter
Video Output
Y
Y
12
1
USB
14
USB
R
W
13
SD CARD
E62405SP
R
Bahasa Indonesia
PEMASANGAN
Menghubungkan ke komputer
1. Pastikan projektor dan komputer
dalam keadaan tidak menyala.
2. Hubungkan satu ujung kabel VGA
dengan konektor “VGA IN” pada
projektor, lalu hubungkan ujung
lainnya dengan konektor VGA pada
computer kemudian kencangkan
bautnya.
3. Hubungkan satu ujung kable daya
dengan soket daya AC pada projektor,
lalu hubungkan ujung lainnya dengan
sumber listrik.
Menyalakan Projektor
1. Buka tutup lensa.
2. Nyalakan projektor terlebih dahulu
kemudian baru nyalakan komputer.
3. Sesuaikan posisi, fokus, dan zoom.
4. Mulailah presentasi.
Mematikan Projektor
1. Tekan tompol daya dua kali.
2. Jangan cabut kabel daya AC dari
sumber listrik sebelum kipas projektor
mati.
KONEKTOR PENGHUBUNG
Memulai dengan Cepat
Catatan: Interface konektor tergantung pada spesifikasi
model.
1. Kabel Daya
2. Kabel VGA
3. VGA ke komponen/adapter HDTV
(
)
4. 3 kabel komponen RCA
(
)
5. Kabel HDMI
(
)
6. Soket 3,5 mm kabel A/V
7. Adaptor iPod/iPhone/iPad
(
)
8. Soket 3,5 mm A/V untuk kabel RCA
(
)
9. Kartu SD
(
)
10. Disk/Stick USB
(
)
Adapter WiFi USB
(
)
11. Kabel pengisi daya USB untuk iPod/
iPhone/iPad
(
)
12. Kabel Video Composite
13.
Kabel Audio Jack/RCA
(
)
14. Kabel USB
(
)
Catatan:
(
)
Opsional.
English
INSTALLATION
Connecting to a Computer
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable
to the “VGA IN” connector on the
projector; connect the other end to
the VGA connector on the computer
and tighten the screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to an
electrical outlet.
Powering On the Projector
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run your presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan shut
down.
INTERFACE CONNECTOR
Quick Start
Note: Connector interface is subject to model’s specifications
1. Power cord
2. VGA cable
3. VGA to Component/HDTV Adapter
(
)
4. 3 RCA Component cable
(
)
5. HDMI cable
(
)
6. 3.5 mm jack A/V cable
7. Adapter for iPod/iPhone/iPad
(
)
8. 3.5 mm jack A/V to RCA cable
(
)
9. SD card
(
)
10. USB disk/stick
(
)
USB WiFi adapter
(
)
11. USB charging cable for iPod/iPhone/
iPad
(
)
12. Composite Video Cable
13. Audio Cable Jack/RCA
(
)
14. USB Cable
(
)
Note:
(
)
optional
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Acer K330 Quick start guide

Category
Cable interface/gender adapters
Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI