Acer K11 Quick start guide

K11
Acer
Brand
Acer
Model
K11
Type
Quick start guide

Acer K11: Experience a world of multimedia possibilities with this versatile device. Seamlessly connect to your computer via VGA cable for presentations or enjoy movies on the big screen with the HDMI port. Unleash your creativity by showcasing photos and videos directly from an SD card or USB drive. Turn your living room into a personal cinema with the 3 RCA Component Cable, ensuring vibrant colors and sharp images.

Acer K11: Experience a world of multimedia possibilities with this versatile device. Seamlessly connect to your computer via VGA cable for presentations or enjoy movies on the big screen with the HDMI port. Unleash your creativity by showcasing photos and videos directly from an SD card or USB drive. Turn your living room into a personal cinema with the 3 RCA Component Cable, ensuring vibrant colors and sharp images.

INSTALLATION
INTERFACE CONNECTOR
Note: Connector interface is subject to model’s specifications
AV IN
VGA IN
HDMI
USB
Adapter
1
2
SD CARD
10
11
D-Sub
D-Sub
3
DVD player,
Set-top Box,
HDTV receiver
R B G
HDTV adapter
R B G
4
5
R B G
9
DVD player,
Set-top Box,
HDTV receiver
iPod/iPhone
7
8
DVD player
HDMI
HDMI
6
AV IN
VGA IN
HDMI
USB
SD CARD
繁體中文
安裝
連接到電腦
1.
請確認投影機和電腦已完全關閉電源。
2.
將
VGA
訊號線的一端連接到投影機上標示
「
VGA IN
」連接埠，另一端連接到電腦的
VGA
連接埠並且鎖緊螺絲。
3.
將電源線的一端連接到投影機上的
AC
電源插
孔，另一端連接到電源插座。
打開投影機電源
1.
取下投影機鏡頭蓋。
2.
先打開投影機電源，接著再打開電腦電源。
3.
調整投影機的位置、焦距和縮放比例。
4.
開始進行簡報。
關閉投影機電源
1.
按兩次電源按鈕。
2.
請等到投影機風扇完全靜止後，再拔掉電源線。
警語與注意事項
安全事項：
1.
請勿直視投影燈源，以免強光傷害您的眼睛。
2.
為預防火災及觸電意外，請勿將本產品淋到雨或
置於潮濕處。
正確使用方法：
1.
如長期未使用本產品，請從
AC
插座拔掉電源插
頭。
更多安全事項及正確使用方法，請參考隨附光碟
內之使用手冊。
介面連接器
快速安裝卡
備註:
接頭介面視機型規格而定
1. 電源線
2. AC電源變壓
3. VGA信號線
4. VGA轉色差/HDTV轉接器
5. 3向RCA色差視頻信號線
6. HDMI信號線
7. 3.5mm接孔A/V線
8. iPod/iPhone轉接器
9. 3.5mm接孔A/V轉RCA線
10.SD卡
11.USB儲存裝置
English
INSTALLATION
Connecting to a Computer
1. Ensure the projector and your
computer are turned off.
2. Connect one end of the VGA cable
to the “VGA IN” connector on the
projector; connect the other end to
the VGA connector on the computer
and tighten the screws.
3. Connect one end of the power cord
into the AC power socket on the
projector; connect the other end to an
electrical outlet.
Powering On the Projector
1. Remove the lens cap.
2. Turn on the projector first and then
the computer.
3. Adjust the position, focus and zoom.
4. Run you presentation.
Powering Off the Projector
1. Press the power button twice.
2. Do not remove AC power cord from
outlet until the projector fan shut
down.
INTERFACE CONNECTOR
Quick Start
Note: Connector interface is subject to model’s specifications
1. Power cord
2. AC adapter
3. VGA Cable
4. VGA to Component/HDTV Adapter
5. 3 RCA Component Cable
6. HDMI Cable
7. 3.5 mm jack A/V cable
8. Adapter for iPod/iPhone
9. 3.5 mm jack A/V to RCA cable
10. SD card
11. USB disk/stick
  • Page 1 1
  • Page 2 2

Acer K11 Quick start guide

K11
Acer
Brand
Acer
Model
K11
Type
Quick start guide

Acer K11: Experience a world of multimedia possibilities with this versatile device. Seamlessly connect to your computer via VGA cable for presentations or enjoy movies on the big screen with the HDMI port. Unleash your creativity by showcasing photos and videos directly from an SD card or USB drive. Turn your living room into a personal cinema with the 3 RCA Component Cable, ensuring vibrant colors and sharp images.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers