Leviton VB3-DZPA1-HD3 Specification

Type
Specification

This manual is also suitable for

Universal Scene Dimmer
The Leviton DZMX1 is a Z-Wave enabled universal dimmer designed for use for most
residential lighting applications. A large range of lighting loads are supported including
dimmable LED and CFL, as well incandescent, halogen and magnetic low voltage.
The DZMX1 is fully compatible with the Wink Hub as well as all of other certified
Z-Wave controllers.
Scene Capable Universal Dimmer
– Z-Wave compatible
– 450W Dimmable LED/CFL
– 1000W Incandescent, Halogen, MLV and Mark X
– 120V 60HZ, neutral required
– White, Light Almond and Ivory faces included
– Supports Z-Wave Beaming and Network Wide Inclusion
Scene capable
User pre-set minimum brightness before turning off
49 different fade rates
Transient surge suppression built-in
User pre-set ‘on level’
Not for use with vizia rf+ systems
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747-3138
Telephone: 1-800-323-8920 Fax: 1-800-832-9538
Tech Line: (8:30-7:00PM E.T. M0nday-Friday): 1-800-824-3005
Visit our website at: leviton.com/automation
© 2014 Leviton Manufacturing Co., Inc. All rights reserved.
Product information for
Universal Scene Dimmer – Part #: DZMX1-1LZ
Switch
The Leviton DZS15 is a Z-Wave enabled universal switch designed for use for most
residential lighting and motor applications. A large range of load types are supported
including incandescent, halogen and magnetic low voltage, electronic low voltage,
fluorescent, and motor loads up to ½ horse power. The DZS15 is fully compatible with
the Wink Hub as well as all of other certified Z-Wave controllers.
15A Scene Capable Switch
– Z-Wave compatible
– 1800W Incandescent, Resistive, Halogen, Fluorescent, Inductive
– 1000W Incandescent, Halogen, MLV and Mark X
– 120V 60HZ, neutral required
– White, Light Almond and Ivory faces included
– Compatible with Z-Wave Network Wide Inclusion, Beaming and Security
Scene capable
Transient surge suppression built-in
Not for use with vizia rf+ systems
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747-3138
Telephone: 1-800-323-8920 Fax: 1-800-832-9538
Tech Line: (8:30-7:00PM E.T. M0nday-Friday): 1-800-824-3005
Visit our website at: leviton.com/automation
© 2014 Leviton Manufacturing Co., Inc. All rights reserved.
Product information for
Switch – Part #: DZS15-1LZ
Split Duplex Receptacle
The Leviton DZR15 is a Z-Wave enabled universal switch designed for use for most
residential lighting and motor applications. A large range of load types are supported
including incandescent, halogen and magnetic low voltage, electronic low voltage,
fluorescent, and motor loads up to ½ horse power. The DZR15 is fully compatible with
the Wink Hub as well as all of other certified Z-Wave controllers.
15A Tamper Resistant Split Duplex Receptacle
– Z-Wave compatible
– Control Side
1800W Incandescent, Electronic/Magnetic Low Voltage,
Fluorescent, ½ HP Motor
– 120V 60HZ
– White, Light Almond and Ivory faces included
– Compatible with Z-Wave Network Wide Inclusion, Beaming and Security
Local Sensing
– Turn a controlled lamp on by manually turning the lamp off then on
Configurable LED
Scene capable
Transient surge suppression built-in
Not for use with vizia rf+ systems
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747-3138
Telephone: 1-800-323-8920 Fax: 1-800-832-9538
Tech Line: (8:30-7:00PM E.T. M0nday-Friday): 1-800-824-3005
Visit our website at: leviton.com/automation
© 2014 Leviton Manufacturing Co., Inc. All rights reserved.
Product information for
Split Duplex Receptacle – Part #: DZR15-1LZ
Plug-In Dimming Lamp Module
The Leviton DZPD3 is a Z-Wave enabled universal lamp module designed for use
for most residential lighting applications. A large range of lighting loads are
supported including dimmable LED and CFL, as well incandescent or halogen.
The DZPD3 is fully compatible with the Wink Hub as well as all of other certified
Z-Wave controllers.
300W LED/CFL Compatible Plug-In Dimming Lamp Module
– Z-Wave compatible
– 100W Dimmable LED/CFL
– 300W Incandescent, Halogen
– 120V 60HZ, neutral required
– White
Compatible with Z-Wave Network Wide Inclusion, Beaming
and Security
Scene capable
Transient surge suppression built-in
Not for use with vizia rf+ systems
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747-3138
Telephone: 1-800-323-8920 Fax: 1-800-832-9538
Tech Line: (8:30-7:00PM E.T. M0nday-Friday): 1-800-824-3005
Visit our website at: leviton.com/automation
© 2014 Leviton Manufacturing Co., Inc. All rights reserved.
Product information for
Plug-In Dimming Lamp Module – Part #: DZPD3-1LW
Plug-In Appliance Module
The Leviton DZPA1 is a Z-Wave enabled universal appliance module designed for
use for most residential lighting and motor applications. A large range of load
types are supported including LED and CFL, incandescent, halogen and magnetic
low voltage, electronic low voltage, fluorescent, and motor loads up to ½ horse
power. The DZPA1 is fully compatible with the Wink Hub as well as all of other
certified Z-Wave controllers.
15A Plug-In Appliance Module
– Z-Wave compatible
– 5A LED/CFL
– 15A Incandescent, Low Voltage
– 120V 60HZ
– White
Compatible with Z-Wave Network Wide Inclusion, Beaming
and Security
Scene capable
Transient surge suppression built-in
Not for use with vizia rf+ systems
Leviton Manufacturing Co., Inc.
201 North Service Road, Melville, NY 11747-3138
Telephone: 1-800-323-8920 Fax: 1-800-832-9538
Tech Line: (8:30-7:00PM E.T. M0nday-Friday): 1-800-824-3005
Visit our website at: leviton.com/automation
© 2014 Leviton Manufacturing Co., Inc. All rights reserved.
Product information for
Plug-In Appliance Module – Part #: DZPA1-1LW
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Leviton VB3-DZPA1-HD3 Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI