SENAO SN356 Quick Installation Manual

Brand: SENAO

Model: SN356

Category: Telephones

Type: Quick Installation Manual

A. Base Unit

Please set up the base unit according to the following steps.

(1) Install the telescopic antenna of the

base unit and extend it fully and

vertically.

(2) Plug in the SENAO AC

adaptor to DC IN jack.

(2) (5) (4)

(3) Plug the AC adaptor into

supporting wall outlet.

(5) A standard telephone

may also be plugged into

TEL jack.

(3)

B. Handset

To install battery pack:

Installation

(4)

Insert the included

telephone line into

the LINE jack and

also the telephone

line into a wall jack.

Handset Operation

B. Making a Telephone number:

1. Press phone number.

2. Enter phone number .

On incoming calls, the ringer will ring or vibrate unless the ringer

1. If the handset is on charger cradle, lift the handset to pick up the

incoming call.

2. If the handset is not on charger cradle, press any key to answer

the incoming call except .

3. If you do not take the incoming calls, the display will prompt you

have missed.

Note: While receiving incoming calls, you can mute the ring by

pressing key.

You can end a call by pressing or by placing the handset onto

the charger cradle.

1.You can use the up Arrow key to scroll through the last 10 phone

numbers dialed. Select and press .

2. Press , then press OPTION Left soft key redialing the last call.

1. Paging the base from the handset:

Press the key on the handset and then press Base (left soft key)

to establish intercom.

When the receiving party’s voice is heard at the base, answer throug

the built in microphone.

2. Paging the handset from the base:

Press the key to establish the intercom.

Press any key on the handset except to answer page.

3. Paging the handset from another handset:

This has to be done throuth the walkie-talkie mode. Please refer

to the section. Walkie-Talkie Between Handsets.

1. Press the key followed by the 2 digit unique handset ID to

establish contact..

( )

C. Answering incoming Calls:

DD. Disconnecting calls:

E. Redial:

G. Intercom:

H. Walkie-Talkie between handsets:

2 3

Quick Installation Guide

1.press key, it Means paging all handsets.

To stop paging, press again.

2.To accept a page, press any key except or remove from

the charger if handset is locked.

3.To end the intercom, press key or place the handset back

onto the Charger.

Paging the handset from the base unit

Base Operation

A. Intercom function

MAIN MENU

1. Keypad Settings

2. Call Memory

3. Ring Setting

4. Parameter

5. Phone Setting

6. Caller ID

1. Area Code

2. +Country Code

3. Call Waiting

4. Direct Incoming

3. Language Settings

2. Base Registration

1. Customer Name Edit

7. TonePulse Select Settings

6. Restore Factory Settings

5. Back Light Settings

4. Flash Time

3. Voice Scramble

2. Battery Saving

1. LCD Contrast Settings

5. Group Ring Setting

4. Ring Volume

3. Page Tone

2. Ring Tone

1. Ring Alert Settings

2. Dialed Calls

1. Received Calls

1. Keypad Guard Settings

2. Keypad Volume

SN356

2. The call in progress will be put on hold.

3. You may press and release the PTT key at any time to establish

contact with a separate handset.

4. You can press the and then * key to communicate to all of

the other handsets.

5. The base unit can join the conversation with the 2 other handsets

by pressing the key. By pressing the key again cancels

the group conference.

6. During the group conference, the multi-Talk indicator on the base

unit will be turned on.

In te rc om

SENAO SN356 Quick Installation Manual

Brand: SENAO

Model: SN356

Category: Telephones

Type: Quick Installation Manual

Download PDF

report

SENAO SN356 Quick Installation Manual

SENAO SN356 Quick Installation Manual

Related papers

Other documents