Silvercrest SFM 4 A1 Operating Instructions Manual

SOURIS OPTIQUE SANS FIL SFM 4 A1

OPTISCHE FUNKMAUS

Bedienungsanleitung

IAN 101410

SOURIS OPTIQUE SANS FIL

Mode d'emploi

WIRELESS OPTICAL MOUSE

Operating instructions

FR / BE Mode d'emploi Page 1

DE / AT / CH Bedienungsanleitung Seite 25

GB Operating instructions Page 49

Avant de lire le mode d'emploi, ouvrez la page contenant les

illustrations et familiarisez-vous ensuite avec toutes les fonctions

de l'appareil.

Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus

und machen Sie sich anschließend mit allen Funktionen des

Gerätes vertraut.

Before reading, unfold the page containing the illustrations and

familiarise yourself with all functions of the device.

SFM 4 A1 – Software CD

SOURIS OPTIQUE SANS FIL SFM 4 A1

OPTISCHE FUNKMAUS

Bedienungsanleitung

IAN 101410

SOURIS OPTIQUE SANS FIL

Mode d'emploi

WIRELESS OPTICAL MOUSE

Operating instructions

Page is loading ...

23

SFM 4 A1

FR

BE

Déclaration de conformité

EU-KONFORMITÄTSERKLÄRUNG

EU-DECLARATION OF CONFORMITY

Wir, Kompernaß Handelsgesellschaft mbH, Burgstraße 21, 44867 Bochum, Germany erklären in

alleiniger Verantwortung, dass

We, Kompernaß Handelsgesellschaft mbH, Burgstraße 21, 44867 Bochum, Germany declare on our own

responsibility that

das Produkt:

the device

Funkmaus

Wireless silent Mouse

Typ:

type / model

Identifikationsnummer/identification number

Year of CE-marking:

SilverCrest

SFM 4 A1

Ru-101410

2014

allen Anforderungen der einschlägigen EU-Richtlinien entspricht.

meets all the provisions of the governing EU regulations which applies to it.



Elektromagnetische Verträglichkeit (EMV):

2004/108/EG

Electromagnetic Compatibility (EMC):

2004/108/EC



RoHS Richtlinie: 2011/65/EU

RoHS Directive: 2011/65/EU



Funkanlagen /

Telekommunikationseinrichtungen

1995/5/EG

R&TTE Directive



Niederspannungs-Richtlinie:

2006/95/EG

Low Voltage Directive (LVD):

2006/95/EC

Angewandte harmonisierte Normen:

Applied harmonized standards

EN 60950-1:2006+A11:2009+A1:2010+A12:2011

EN 55022:2010

EN 55024:2010

EN 300 440-1 V1.6.1

EN 300 440-2 V1.4.1

EN 301 489-1 V1.9.2

EN 301 489-3 V1.6.1

EN 50581:2012

Bochum, 21.05.2014

____________________________

Semi Uguzlu

Quality Manager

IB_101410_SFM4A1_LB2.indb 23 14.07.14 15:33

24

SFM 4 A1

IB_101410_SFM4A1_LB2.indb 24 14.07.14 15:33

Page is loading ...

47

SFM 4 A1

DE

AT

CH

Konformitätserklärung

EU-KONFORMITÄTSERKLÄRUNG

EU-DECLARATION OF CONFORMITY

Wir, Kompernaß Handelsgesellschaft mbH, Burgstraße 21, 44867 Bochum, Germany erklären in

alleiniger Verantwortung, dass

We, Kompernaß Handelsgesellschaft mbH, Burgstraße 21, 44867 Bochum, Germany declare on our own

responsibility that

das Produkt:

the device

Funkmaus

Wireless silent Mouse

Typ:

type / model

Identifikationsnummer/identification number

Year of CE-marking:

SilverCrest

SFM 4 A1

Ru-101410

2014

allen Anforderungen der einschlägigen EU-Richtlinien entspricht.

meets all the provisions of the governing EU regulations which applies to it.



Elektromagnetische Verträglichkeit (EMV):

2004/108/EG

Electromagnetic Compatibility (EMC):

2004/108/EC



RoHS Richtlinie: 2011/65/EU

RoHS Directive: 2011/65/EU



Funkanlagen /

Telekommunikationseinrichtungen

1995/5/EG

R&TTE Directive



Niederspannungs-Richtlinie:

2006/95/EG

Low Voltage Directive (LVD):

2006/95/EC

Angewandte harmonisierte Normen:

Applied harmonized standards

EN 60950-1:2006+A11:2009+A1:2010+A12:2011

EN 55022:2010

EN 55024:2010

EN 300 440-1 V1.6.1

EN 300 440-2 V1.4.1

EN 301 489-1 V1.9.2

EN 301 489-3 V1.6.1

EN 50581:2012

Bochum, 21.05.2014

____________________________

Semi Uguzlu

Quality Manager

IB_101410_SFM4A1_LB2.indb 47 14.07.14 15:33

48

SFM 4 A1

IB_101410_SFM4A1_LB2.indb 48 14.07.14 15:33

49

SFM 4 A1

GB

Contents

Introduction . . . . . . 50

Copyright . . . . . . . . . . . .50

Limitation on liability . . . .50

Intended use . . . . . . . . . .51

Warnings used . . . . . . . .52

Notes on trademarks . . .53

Safety . . . . . . . . . . . 53

Basic safety guidelines . .53

Controls and

package contents . 56

Initial operation . . . 57

Check package contents

(see fold-out page) . . . . .57

Disposal of packaging

materials . . . . . . . . . . . . .58

Inserting/replacing the

batteries . . . . . . . . . . . . .58

Connecting the

nano-USB receiver. . . . . .59

Power-saving mode . . . . .59

Changing operating

modes . . . . . . . . . . . . . . .60

Installing the software . . .60

Conﬁ guration of the

mouse buttons . . . . . . . . .62

Troubleshooting . . 64

Cleaning . . . . . . . . . 65

Storage . . . . . . . . . 65

Disposal . . . . . . . . . 66

Disposal of the device . . .66

Disposal of batteries . . . .66

Appendix . . . . . . . . 67

Technical data . . . . . . . . .67

Warranty . . . . . . . . . . . . .68

Service . . . . . . . . . . . . . .69

Importer . . . . . . . . . . . . .69

Declaration of conformity 70

IB_101410_SFM4A1_LB2.indb 49 14.07.14 15:33

GB

50

SFM 4 A1

Introduction

Congratulations on the purchase of your new device.

You have selected a high-quality product. The operating

instructions are part of this product. They contain impor-

tant information on safety, usage and disposal. Before

using the product, familiarise yourself with all handling

and safety guidelines. Use the product only as described

and for the range of applications speciﬁ ed. Keep these

operating instructions in a safe place. Please also pass

these operating instructions on to any future owner(s).

Copyright

This documentation is subject to copyright protection.

Any reproduction, or any reprint even in the form of

excerpts, as well as the rendition of ﬁ gures even in modi-

ﬁ ed form, is only permitted with the manufacturer's written

consent.

Limitation on liability

All the technical information, data and instructions regard-

ing installation, connection and operation contained in

these operating instructions corresponds to the latest infor-

mation available to us at the time of printing and takes

our previous experience and know-how into account.

IB_101410_SFM4A1_LB2.indb 50 14.07.14 15:33

51

SFM 4 A1

GB

No claims may be derived from the speciﬁ cations, ﬁ gures

and descriptions in these operating instructions. The manu-

facturer assumes no responsibility for damage caused

by failure to observe these instructions, improper use,

incompetent repairs, making unauthorised modiﬁ cations

or for using unapproved replacement parts.

Intended use

This wireless mouse is an information technology device

designed as an input device for a computer. The device

must not be used outside of closed rooms. This device

is not intended for use in companies or for other com-

mercial uses (e.g. oﬃ ce productivity applications). Use

the device only in the home for private purposes. It is

not intended for any other use. Claims of any kind for

damage arising as a result of incorrect use will not be

accepted. The risk shall be borne solely by the user.

IB_101410_SFM4A1_LB2.indb 51 14.07.14 15:33

GB

52

SFM 4 A1

Warnings used

The following warnings are used in these operating

instructions:

DANGER

A warning at this hazard level indicates

an imminentl

y hazardous situation.

If the hazardous situation is not avoided, it could

result in death or serious physical injury.

► Follow the instructions in this warning to prevent

a fatality or serious personal injury.

CAUTION

A warning at this hazard level indicates

pot

ential material damage.

Failure to avoid this situation could result in material

damage.

► Follow the instructions in this warning to prevent

material damage.

NOTE

► A note indicates additional information that eases

de

vice handling.

IB_101410_SFM4A1_LB2.indb 52 14.07.14 15:33

53

SFM 4 A1

GB

Notes on trademarks

- USB

®

is a registered trademark of USB Implementers

Forum, Inc.

- Microsoft

®

, Windows

®

and other Microsoft product

names are registered trademarks of the Microsoft

Corporation.

- Intel

®

and Pentium

®

are registered trademarks of the

Intel Corporation.

- AMD

®

and AMD

®

Athlon™ are registered trademarks

of Advanced Micro Devices, Inc.

All other names and products may be trademarks or

registered trademarks of their respective owners.

Safety

In this section, you will receive important safety advice

relating to device handling. Improper use may result in

personal injury and material damage.

Basic safety guidelines

To ensure safe handling of the device, follow the safety

guidelines set out below

Ŷ WARNING! LED radiation! LED risk class 1.

A

void damage to eyes. Do not stare into the LED

beam. Do not look directly at the LED beam using

optical instruments.

IB_101410_SFM4A1_LB2.indb 53 14.07.14 15:33

GB

54

SFM 4 A1

Ŷ Prior to use, check the device for visible external

damage. Do not operate a device that has been

damaged or dropped.

Ŷ Always place the device on a stable and level surface.

It can be damaged if dr

opped.

Ŷ Do not expose the device to direct sunlight or high

temper

atures. Otherwise it may overheat and be

irreparably damaged.

Ŷ Do not place the product near heat sources such

as r

adiators or other heat-generating devices.

Ŷ Never attempt to open the device.

Ŷ Do not make any unauthorised modiﬁ cations or

alter

ations to the device.

Ŷ Do not expose the device to spray or dripping water

and do not place liquid-ﬁ

lled objects, such as vases

or open drink containers, on or near the device.

Ŷ Packaging materials such as plastic ﬁ lm or poly-

st

yrene must not be used as playthings.

Risk of suﬀ ocation!

IB_101410_SFM4A1_LB2.indb 54 14.07.14 15:33

55

SFM 4 A1

GB

DANGER

Mishandling the batteries can cause ﬁ r

es,

explosions, leakages or other hazards!

► Do not throw the batteries into a ﬁ re and do not

subject them to high temperatures.

► Do not open, deform or short-circuit batteries,

since this can lead to chemical leak

age.

► Do not attempt to recharge batteries. Do not

charge batteries unless they are explicitly labelled

as "rechargeable". There is a risk of explosion!

► Check the condition of the batteries at regular

inter

vals. Leaking chemicals can cause permanent

damage to the device. Take particular care when

handling damaged or leaking batteries. Risk of

chemical burns! Wear protective gloves.

► Chemicals which leak from a battery can cause

skin ir

ritation. In event of contact with the skin, rinse

with copious amounts of water. If the chemicals come

into contact with your eyes, rinse thoroughly with

water, do not rub and consult a doctor immediately.

► Keep batteries out of the reach of children.

Children can put batteries into their mouth and

swallow them. If a battery has been swallowed,

seek medical assistance IMMEDIATELY.

► Do not mix diﬀ erent types of batteries.

IB_101410_SFM4A1_LB2.indb 55 14.07.14 15:33

GB

56

SFM 4 A1

DANGER

► Always insert the batteries the right way round

(observe correct polarity) otherwise there is a

danger that they could explode.

► If you do not intend to use the device for a long

time, remove the batteries.

Controls and package contents

1 Left mouse button

2 Right mouse button

3 Scroll wheel

4 DPI button

5 Back button

6 Forward button

7 Optical sensor

8 Battery compartment

9 Storage compartment for the nano-USB receiver

0 Nano-USB receiver

q Software CD

w 2 x 1.5 V batteries

e Operating instructions

IB_101410_SFM4A1_LB2.indb 56 14.07.14 15:33

57

SFM 4 A1

GB

Initial operation

Check package contents

(see fold-out page)

The following components are included in delivery:

● Wireless mouse SFM 4 A1

● Nano-USB receiver 0

● Software CD q

● 2 x 1.5 V batteries w

● These operating instructions e

NOTE

► Check the consignment for completeness and for

signs of visible damage.

► If the consignment is incomplete or damaged due

to defectiv

e packaging or carriage, contact the

Service hotline (see the chapter Service).

Remove all parts of the device from the packaging and

remove all packaging materials.

IB_101410_SFM4A1_LB2.indb 57 14.07.14 15:33

GB

58

SFM 4 A1

Disposal of packaging materials

The packaging protects the device from damage during

shipment. The packaging materials have been selected

for their environmental friendliness and ease of disposal

and are therefore recyclable.

Returning the packaging to the materials

cycle conserves raw materials and reduces

the amount of waste that is generated.

Dispose of packaging materials which are no longer

needed in accordance with applicable local regulations.

Inserting/replacing the batteries

♦ Open the battery compartment 8 on the underside

of the wireless mouse.

♦ Insert 2 x 1.5 V AA batteries into the battery com-

par

tment 8 (observe correct polarity). First place

one battery in the lower compartment and then the

second battery in the higher compartment. Ensure

that the paper strip is positioned under the batteries,

this will make future battery exchanges easier.

♦ Close the battery compartment 8.

CAUTION

► Always use batteries from the same manufacturer

and of the same t

ype. Always replace both batteries

at the same time.

IB_101410_SFM4A1_LB2.indb 58 14.07.14 15:33

59

SFM 4 A1

GB

Connecting the nano-USB receiver

♦ Remove any other mouse that is connected to your

computer and then restart the computer.

♦ Remove the nano-USB receiver 0 fr

om the storage

compartment 9 on the bottom of the wireless

mouse.

♦ Connect the nano-USB receiver 0 to a fr

ee USB-port

on your computer while it is running.

The operating system recognises the new hardware

and automatically installs the necessary drivers. After

the installation of the driver, the wireless mouse is ready

for operation and can be used.

Power-saving mode

The wireless mouse is equipped with a power-saving mode.

Ŷ If you switch the computer oﬀ , the wireless mouse

automatically switches oﬀ

after around 8 minutes

in order to save power.

Ŷ If you disconnect the nano-USB receiver 0 fr

om the

computer, the wireless mouse automatically switches

oﬀ after around 8 minutes in order to save power.

Ŷ If you do not click, scroll or move the wireless mouse,

it turns oﬀ

after about 8 minutes. As soon as you

press any button on the wireless mouse or use the

scroll wheel, the wireless mouse switches back on.

IB_101410_SFM4A1_LB2.indb 59 14.07.14 15:33

GB

60

SFM 4 A1

Changing operating modes

You can use the DPI button 4 to switch the optical sam-

pling between the resolutions 1000 dpi, 1500 dpi and

2000 dpi. The higher the resolution, the more accurate

the wireless mouse's sampling.

Installing the software

To be able to use the full functionality of the mouse, you

must install the supplied software.

NOTE

► The following illustrations and descriptions relate

to the oper

ating system Microsoft

®

Windows

®

7.

The screen display may diﬀ er for other operating

systems.

♦ Insert the supplied software CD q in the CD-R

OM

drive of your computer.

The installation process should start automatically.

♦ If this is not the case, start the "setup.exe" ﬁ le on the

CD-R

OM manually by double-clicking it.

The installation starts and the installation wizard is

displayed.

IB_101410_SFM4A1_LB2.indb 60 14.07.14 15:33

61

SFM 4 A1

GB

The start window of the installation wizard will be displayed.

♦ Click on the "Next >" button.

♦ In the next step, you can choose the destination

folder for the installation b

y using the "Browse"

button or selecting the suggested destination.

♦ Move on to the next step by clicking on the

"Next >" button.

IB_101410_SFM4A1_LB2.indb 61 14.07.14 15:33

Page is loading ...

Silvercrest SFM 4 A1 Operating Instructions Manual

This manual is also suitable for

Silvercrest SFM 4 A1 Operating Instructions Manual

in other languages

Related papers

Other documents