2. Computers & electronics
  3. TVs & monitors
  4. Wall & ceiling mounts accessories
  5. Toro
  6. Tow Pole Reinforcement Kit, Log Splitter
Tow Pole Reinforcement Kit, Log Splitter

Toro Tow Pole Reinforcement Kit, Log Splitter Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Tow Pole Reinforcement Kit, Log Splitter Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3442-534RevA
TowPoleReinforcementKit
LogSplitter
ModelNo.144-2044
InstallationInstructions
Installation
PreparingtheMachine
1.Parkthemachineonalevelsurfaceandshutoff
theengine.Allowtheenginetocool.Chockor
blockthewheels.
2.Disconnectthesparkplugwire.
3.Raisetherailtotheverticalpositionasfollows.
A.Removethelockpin.
B.Rotatetherailsothatitisvertical,against
thebaseofthemachine.
C.Rotatetheverticallocklevertotheclosed
positiontosecurethelowerrailinplace.
g206125
Figure1
4.Useacarjackundertheengine-mountingplate
andraisethemachineuntilthefrontswivel
wheelsareofftheground.Supportthemachine
usingjackstands.
InstallingtheKit
1.Placethesupportbracketonthetowpoleso
thatitisrestingagainstthepivotplate.
2.Marktheholesonbothsidesofthetowpoleand
removethesupportbracket.
g335712
Figure2
1.Markanddrilltheseholes(4)
©2020—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3442-534*
3.Removethetowpolefromthepivotbracket.
Discardthefasteners.
g332091
Figure3
1.Nut(2)2.Bolt(2)
4.Raisethetowpoleanddrillholes(17/32inch
diameter)atthelocationsmarkedinstep2.
WARNING
Usingadrillwithoutpropereye
protectionmayallowdebristoenterthe
eye,causinginjury.
Whendrillingorcarryingoutother
operation,alwaysweareyeprotection.
5.Securethetowpoleandaplatetothepivot
bracket.
g335711
Figure4
1.Nut—1/2inch(2)3.Bolt—1/2x2inches(2)
2.Plate
6.Placethesupportbracketonthetowpoleand
secureitatthebottomholes.
g335714
Figure5
1.Bolt—1/2x3-1/2inches
(2)
2.Nut—1/2inch(2)
2
7.Usingthesupportbracketasaguide,drill2
holes(17/32inchdiameter)intothepivotplate.
g335710
Figure6
1.Drillhere.
8.Securethesupportbrackettothepivotplate.
g335713
Figure7
1.Nut—1/2inch(2)3.Bolt—1/2x2inches(2)
2.Plate
9.Torqueall6boltsto142N∙m(105ft-lb).
10.Lowerthemachinesothatthetowpolerestson
thefrontwheels.
11.Lowertherailtothehorizontalpositionand
secureitwiththelockpin.
12.Connectthesparkplugwire.
3
/