AAXA AAXA P7 User manual

aaxa

TECHNOLOGIES

User Guide

Caution!

WARNING: Please use this product as instructed. Misuse may cause

injury or death.

DO NOT use while driving

DO NOT expose to water or wet

surfaces. Electric shock may occur

DO NOT expose the projected LED

image to your eyes or the eyes of

others

DO NOT block or restrict airow

from ventilation holes as this may

cause the projector to overheat

Keep the projector, battery, or

charger away from any heat sources

Caution for Battery Use

• Do not pierce or puncture the battery

with sharp objects

• Do not heat the product or expose it to

high temperature.

• Do not wet it or place it in any liquid

Caution for Headphone Use

• Prolonged use at high volume may impair your

hearing.

• High volume during walking or driving may

cause distractions and result in injury or death

Table of Contents

Chapter 1: P7 at a Glance

P7 Introduction

Remote & Keypad

Accessories

Chapter 2: Getting Started

Powering On / Off

Focus Adjustment / Throw

Distance

Connecting to Speaker or

Headphones

Loading External Content

Chapter 3: Menu Screens

Main Menu

Brightness Menu

Video Player Menu

Photo Menu

Connecting to Device via Digital

Input

Connecting to Computer via

VGA

Connecting to Composite Video

Music Player Menu

E-Book Viewer Menu

Chapter 4: Settings Menu

Brightness Settings

Sound Settings

Option Settings

Picture Settings

Chapter 5: Technical Details

Troubleshooting

Specications

Notes

1

2

3

4

5

6

7

11

12

13

17

21

24

26

28

31

33

34

35

36

37

38

39

P7 at a Glance

1

Chapter 1

Power Button

TF Card

Digital Input

USB Port

Main Unit Front/Back

mini-VGA Port

Power Switch

Focus Adjustment

AV Port

Headphone Out

Power On/Off

DC Port

Infrared Receiver

(Remote Control)

Remote & Keypad

2

NOTE: Pressing power on the remote will only put the projector in STANDBY mode.

Toggle the “ON/OFF” switch on the side of the projector to fully turn the projector

off.

Power On/Off

Select Source

Input Exit/Back

Direction Pad

Both the keypad and remote can be used to navigate through the menus. The Main Menu

Navigation on the remote functions exactly the same as the directional pad on the P7 unit.

On / Off

LED Lights

OK

Main Menu

Navigation

Media Player

Menu Navigation

Volume Up

Volume Down

Remote

Keystone

Adjustment

Keystone

Adjustment

Accessories

3

*Under various circumstances, the actual accessories may be different from

those shown in the pictures above.

Additional accessories are available for purchase at www.aaxatech.com

Remote

Power Adapter

A/V Cable

VGA Adapter Cable

(Sold Separately)

Internal Battery

(Sold Separately)

Getting Started

1. Connect the power cord to the P7.

2. Connect the other end of the power cord into the wall power source.

3. Toggle the On / Off switch on the side of the projector to the “ON” position -- the

projector should automatically turn on.

4. If the projector does not automatically turn on with the “Power Switch” toggled to the

“ON” position, press the “ON/OFF POWER” button on the keypad and hold for

2-3 seconds to start the projector.

4

Powering ON the projector

Chapter 2

Powering OFF the projector

Standby Mode

1. To transition to “STANDBY” mode, press the power button on the keypad or the

remote control.

2. The optical engine should power off and the fan should stop spinning. The projector

is now in “STANDBY” mode and can be turned on using the remote control.

*Note: Standby mode will still consume a small amount of power.

1. To turn off the projector, toggle the “Power Switch” to the “OFF” position. This will

fully turn off the projector. We recommend charging the projector while projector is

fully turned off.

Focus Adjusment / Throw Distance

5

DIAGONAL SCREEN SIZE

16:9 Aspect Ratio

Throw Distance

Units: Inches

20

30

40

50

60

70

80

90

Diagonal Size

Units: Inches

19

29

38

48

57

67

76

86

• Spin the focus wheel up or down until the image becomes

clear.

Focus Adjustment

Throw Distance Chart

Throw Ratio 1.20

Projection Angle: 100% Offset

*minimum throw distance: 16 inches

Connecting Speakers / Headphones

Connect your speakers/headphones to

the projector’s audio port.

Step 1:

Step 2:

*CAUTION: Prolonged use of headphones at a high

volume may impair hearing.

Ensure that the projector and/or the

headphones are powered on.

Step 3:

Place the headphones on and enjoy!

6

7

Loading External Content

The P7 can read les directly from both

a TF Card and USB Drive.

Supported le types include:

MP3 / WMA / OGG / WAV

AVI / JPG / GIF/ BMP

(up to 32 GB)

Loading External Content Cont.

(up to 32 GB)

How to insert your TF Card

• Slide in your TF card into the TF card

slot on the side of the P7 (as shown in

picture).

• Gently slide the TF card until it clicks

into place.

8

Loading External Content Cont.

How to insert your USB Drive

• Slide your USB Drive into the USB port.

• Gently slide the drive until it cannot go in any further.

(up to 32 GB)

9

Loading External Content Cont.

10

Once your TF Card or USB Drive is inserted into the projector, the TF Card or

USB Drive Storage will be loaded automatically and the content can be found

through the Photos, Videos and Music icons located on the Main Menu, depend-

ing on the le type you wish to play. Loaded content can also be found through

the Text icon, located within the Settings Menu.

Menu Screens

11

Chapter 3

Main Menu

The P7 features a built in PMP (Portable Media Player) function.

This function allows the projector to play videos, pictures, and music les directly from

your connected devices.

• Press the left and right directional buttons to choose an icon from the main menu.

• To select a menu option, press the “OK” button in the middle of the navigation pad.

• To go back to the previous screen, press the “Back” button.

• To Jump back to the submenu, press the “Menu” button once.

• To return to the main menu, press the “Return” button twice.

Input Exit/Back

Direction Pad

On / Off

LED Lights

OK

Exit/Back

Brightness Menu

To change the brightness on your P7:

• Select the “Brightness” icon (Fig. 3.1)

• Select the brightness you wish (Fig. 3.2). Please note that “Boost”

brightness is the only setting available when the projector is plugged into

power.

12

Fig. 3.1

Fig. 3.2

Video Player Menu

13

The P7 will show all folders and les you have on your USB or TF drive.

Use the navigation buttons to select folders or les.

Opening a le:

• Select the “Video” icon (Fig. 3.3).

• From the submenu (Fig. 3.4), select the storage media with the stored les.

• Choose which le you wish to play.

Fig. 3.3

Fig. 3.4

14

Video Player Menu

While Playing Videos

While playing videos, the volume and keystone are adjustable. Further controls

are available in the video player submenu - which is accessed through the “OK”

button.

Volume Down

Volume Up

OK

Enter Video Player Submenu

• To open/hide the video playback menu, use the

“OK” and “Back” Buttons on the projector.

Positive Keystone Adjustment

Negative Keystone Adjustment

15

Video Player Submenu

Playing Videos

The Video Player Submenu can be accessed by pressing “OK” during video

playback. To exit the Video Player Submenu, press the “Back” button or wait

5 seconds. To navigate the Playback Menu, use the directional buttons on the

navigation pad or remote to highlight the option you wish to choose (Fig. 3.5).

Move selection left

Move selection right

• To open/hide the video playback menu, use the “OK” and “Back” buttons on the projector.

OK

Fig. 3.5

Conrm selection

OK

Video Playback FAQ

How do I loop a video?

1. Choose either USB or TF Card

for playback

2. Navigate the folders until you

reach the le you wish to play.

3. Highlight the le you want to

play, then conrm the selection.

4. Move selection on video player

menu to “Repeat 1”, and con-

rm the selection.

5. The video will now loop after

playback is nished.

How do I preview a video?

1. Choose the “video” option from

the main menu

2. Navigate using either remote or

onboard buttons to the le you

wish to preview.

3. Highlight the le. *Do not select

the le, just highlight it*.

4. Wait for 3-4 seconds.

5. A preview screen will pop up on

the lower right for the video.

16

Photo Menu

17

Previewing Files:

• Press the directional keys to highlight the desired le.

• Wait 2-3 seconds and a preview of the picture will show on the screen.

The P7 will show all folders and les you have on your USB or TF Card drive.

Use the navigation buttons to select folders or les.

Opening A File:

• Select the “Photo” icon (Fig. 3.6).

• From the submenu (Fig. 3.7), select the storage media with the stored les.

• Choose which le you wish to play

Fig. 3.6

Fig. 3.7

Page is loading ...

AAXA AAXA P7 User manual

This manual is also suitable for

AAXA AAXA P7 User manual

Related papers

Other documents