Wren Kitchens 600 - 1000mm Sink/Hob Door Base Unit Assembly Guide

Brand: Wren Kitchens

Model: 600 - 1000mm Sink/Hob Door Base Unit

Type: Assembly Guide

This manual is also suitable for

BASE UNIT 600

Wren Kitchens 600 - 1000mm Sink/Hob Door Base Unit is a versatile and durable addition to any kitchen. With its adjustable shelves and ample storage space, it can be customized to fit your specific needs. The soft-close hinges ensure a smooth and quiet operation, while the sturdy construction provides lasting durability. Whether you're a seasoned chef or a novice cook, this base unit is sure to make your kitchen experience more enjoyable. Here are some of the key features and benefits of the Wren Kitchens 600 - 1000mm Sink/Hob Door Base Unit:

Adjustable shelves: The shelves can be adjusted to accommodate items of various sizes, making it easy to store everything from pots and pans to spices and condiments.

Adjustable shelves: The shelves can be adjusted to accommodate items of various sizes, making it easy to store everything from pots and pans to spices and condiments.

BASE UNIT

600 - 1000 Sink/Hob

1/2 Door

Assembly Guide

For Internal Use: FI.WR.INS.057_WKIN00145_BASE_600-1000_1-2Dr_Sink/Hob_Rev2.indd

1000

600

800

BASE UNIT

600 - 1000 Sink/Hob

1/2 Door

Assembly Guide

For Internal Use: FI.WR.INS.057_WKIN00145_BASE_600-1000_1-2Dr_Sink/Hob_Rev2.indd

Page 1

(F) x8

Wooden Dowel

(G) x6

Cam Dowel

(Expanding)

(H) x6

Cam Lock

(K) x4

30mm

Screw

(L) x12

15mm

Screw

(N) x2

Door

Buer

(Z) x4

Shelf Peg

plastic

(M) x4

Cover

Cap

BEFORE YOU START

INSTALLATION

SHOULD BE

PERFORMED BY A

COMPETENT

PERSON ONLY.

THIS PRODUCT COULD

BE DANGEROUS

IF INCORRECTLY

INSTALLED

Panel B

x2 End Panel

Panel E

x1 Rail

Panel C

x1 Base Panel

Shelf

Sink

Rail

Legs

x4 or 5

as req’d

Frontal

(Packed separately)

x1 or 2

as req’d

Panel A

x1 Back Panel

(800 - 1000 folded)

REQUIRED TOOLS

NOT to be used

with CAM DOWEL

& CAM LOCK

sink rail +

screws

600 - *o

800 - *o

1000 - *o

.pk.

t.141

Hinge Mounting Plate

x4 Inc Screws

Hinge

x4 Inc Screws

BASE UNIT

600 - 1000 Sink/Hob

1/2 Door

Assembly Guide

For Internal Use: FI.WR.INS.057_WKIN00145_BASE_600-1000_1-2Dr_Sink/Hob_Rev2.indd

Page 2

Step 1.

Seat dowel (F) into holes in

both end panels (B) as shown.

Step 2.

Seat cam dowel (G) into holes in

both end panels (B) as shown.

Step 4.

Join panels (C) to (B).

Insert cam lock (H).

Do NOT tighten until Step 6.

All Cam Locks (H) are to be positioned facing the

outside of the unit carcass, for ease of tightening.

Do NOT use power tools with

cam dowel (G) or cam lock (H)

Seat (G)

cam dowel

into hole as

shown.

View from underside

Sink Rail

Insert

Sink Rail

Insert

Dowel (F), Cam Dowel (G)

& Sink Rail Screw

Location detail

Sink Rail

Step 3.

Attach panels (C) & (E) to panels (B), using dowels (F)

(orange) and cam dowel (G) & cam lock (H) (blue) in

positions shown.

Insert sink rails as shown & secure with 2 x 15mm

screws (L) into panels (B).

BASE UNIT

600 - 1000 Sink/Hob

1/2 Door

Assembly Guide

For Internal Use: FI.WR.INS.057_WKIN00145_BASE_600-1000_1-2Dr_Sink/Hob_Rev2.indd

Page 3

9mm

Step 5.

Slide back panel (A) into

groove of end panels (B).

The back Panel (A) is to be modied accordingly

to suit Customer Requirements,prior to inserting

into cabinet. for 1000 width cabinets,

the Back panel.

Once back panel (A) is in position, ensure the

panel is ush & square with bottom of

end panels (B).

Step 6.

Hand tighten all cam locks (H), this will

expand cam dowels (G) and tighten the

unit together.

Step 7.

Ensure carcass is square. Secure back panel (A)

with 3 or 4 x 30mm screws (K) equally spaced at

the lower end of back panel (A) into base panel

(C), as shown.

Ensure you screw into the centre of the base

panels (C) (9mm from the edge).

600 Carcase used for example

BASE UNIT

600 - 1000 Sink/Hob

1/2 Door

Assembly Guide

For Internal Use: FI.WR.INS.057_WKIN00145_BASE_600-1000_1-2Dr_Sink/Hob_Rev2.indd

Page 4

Step 8.

Secure each of the legs into place

with 2 x 15mm screws (L).

600-800 Width Cabinets, 4 legs

1000 with Cabinets, 5 legs

Step 9.

Lightly hit centre peg of leg

base with hammer until ush.

Step 10.

Push leg rmly down into leg base.

Adjust legs to 155mm before turning carcass

upright. Once in situ level accordingly.

Ensure legs are rotated as shown so that part

of it is supporting the end panels (B).

Front legs should have at edge to the front.

Leg position diagram

1000 Carcase used for example

Front

BASE UNIT

600 - 1000 Sink/Hob

1/2 Door

Assembly Guide

For Internal Use: FI.WR.INS.057_WKIN00145_BASE_600-1000_1-2Dr_Sink/Hob_Rev2.indd

Page 5

Step 11.

Attach hinge mounting plate

onto both End Panel or panels,(B) as shown, using Screws

which are already positioned within the Hinge Plates.

Hinge side or sides to be mounted in accordance to

customer kitchen plan.

Securing to adjacent units

Screw into any side units using the 30mm screws (K)

provided to secure to the unit. Screw just to the rear of the

hinge plate at the top and bottom of both sides of the unit,

place a cover cap (M) on the head to conceal it.

Securing to Wall

Secure unit to wall using 2 Screws. Drill 2 pilot holes through the back rail into the wall and insert

wall plugs, tighten the screws.

Screws for attaching to walls are not provided as these vary depending on your wall material

and construction.

Ensure appropriate xings for wall construction are used.

126mm

94mm

from base

from top

Hinge Plates

Worktop

Screw up through the front sink rail (and additional rail where

applicable) into worktop to secure it

in place.

Screws for attaching to worktop are not supplied as these

vary depending on worktop material and thickness. Ensure

appropriate xings for attaching worktop are used. Please

refer to the specialist worktop supplier if these are required

for solid surface worktops.

BASE UNIT

600 - 1000 Sink/Hob

1/2 Door

Assembly Guide

For Internal Use: FI.WR.INS.057_WKIN00145_BASE_600-1000_1-2Dr_Sink/Hob_Rev2.indd

Page 6

Step 12.

Insert hinge in top & bottom

holes as shown.

Step 13.

Secure hinges by tightening

2 x screws with hinge dowels

attached. These are already

positioned within the hinges.

Step 14.

Attach the door to unit

where required.

To attach door

clip hinge onto hinge

plate and click to secure.

Step 16.

Fit cover caps to hinge.

Adjust Softclose to suit.

Step 15.

Adjust hinge to suit. As shown below.

To adjust hinge using a

screw driver,

tighten or loosen as

required at points 1 & 2.

Point 1 - In - Out

Point 2 - Left - Right

FRONTAL

HINGE

ADJUSTMENT

Hinge Plates

View from Inside of Carcass

To Release door

Pull catch as shown,

to release hinge

from the hinge plate.

The top and bottom

hinges MUST be

adjusted to the SAME

STRENGTH.

Hinge Cover Caps

Wren Kitchens 600 - 1000mm Sink/Hob Door Base Unit Assembly Guide

Brand: Wren Kitchens

Model: 600 - 1000mm Sink/Hob Door Base Unit

Type: Assembly Guide

This manual is also suitable for

BASE UNIT 600

Adjustable shelves: The shelves can be adjusted to accommodate items of various sizes, making it easy to store everything from pots and pans to spices and condiments.

Download PDF

report

Wren Kitchens 600 - 1000mm Sink/Hob Door Base Unit Assembly Guide

This manual is also suitable for

Wren Kitchens 600 - 1000mm Sink/Hob Door Base Unit Assembly Guide

Related papers

Other documents