2. Home
  3. Home furniture
  4. Living room & hall furniture
  5. Coffee & end tables
  6. BDI
  7. Dino 1347
Dino 1347

BDI Dino 1347, DINO, Dino 1343, Dino 1344 User manual

  • Hello! I am an AI chatbot trained to assist you with the BDI Dino 1347 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
DINO 1343
COFFEE TABLE
DINO 1344
SMALL COFFEE TABLE
DINO 1347
END TABLE
A - Hex Wrench 4mm
x 1
C - 1/4-20 x 1/2
Flat Head Screws
4mm Socket Drive
x 3
B - 1/4-20 x 3/4
Flat Head Screws
4mm Socket Drive
x 6
G - Felt Pads x 3
H - Felt O-Rings x 3
DINO TABLES
Designed by Louis A. Lara
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2011 BDI
1343 1344 1347 Revision: 02-23-11
Component List
DINO TABLES are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at customerservice@bdiusa.com.
For all other concerns, please contact your BDI Retailer.
1343 1344 1347
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [email protected]
Placement and Maintenance
DINO TABLES are designed for indoor use on level floors. Clean glass with glass cleaner, and shelf with a moist cloth.
D - Legs x 3
E - Shelf x 1
F - Glass x 1
F
B
D
G
C
H
E
DINO TABLES
1343 1344 1347
ASSEMBLY INSTRUCTIONS
2
BDIUSA.COM CUSTOMERSERVICE@BDIUSA.COM
Step 1 - Attach Legs to Shelf
Place long edge of Shelf (E) on soft surface in order to prevent damage.
Attach
Legs (D) to Shelf (E) using Screws (B) and tighten using Hex Drive Wrench (A).
Attach first
Leg (D) to middle point of Shelf (E).
Optional: If placed on hard floor, attach
Felt Pads (G) to bottom of Legs (D).
Step 2 - Attach Glass to Legs
Attach Felt O-Rings (H) to Glass Pucks.
Turn table up onto
Legs (D).
Place
Glass (F) onto Legs (D).
Loosely start all
Screws (C) into Glass Fittings.
After all
Screws (C) are started, then tighten
Screws (C) using Hex Drive Wrench (A).
E Shelf
Place long edge on soft surface
in order to prevent damage.
A
D
Attach 1st
D
D
D
B
B
C
F
A
D
F
D
G
G
G
G
H
Glass Puck
/