Lightolier Calculite Accessories/Options SCA User manual

Lightolier
Brand
Lightolier
Model
Calculite Accessories/Options SCA
Type
User manual

This manual is also suitable for

Lightolier Calculite Accessories/Options SCA is a slope ceiling adapter that allows you to install recessed fixtures in sloped ceilings without changing the vertical axis of the fixture or its lighting characteristics. The SCA is made of 16 ga. spun aluminum with a matte white finish and is available in the following slope angles: 5°, 10°, 15°, 20°, 25°, and 30° (maximum). The SCA comes with four perforated tabs that provide temporary support during installation and four locking screws that secure the SCA to the mounting frame of the fixture.

Lightolier Calculite Accessories/Options SCA is a slope ceiling adapter that allows you to install recessed fixtures in sloped ceilings without changing the vertical axis of the fixture or its lighting characteristics. The SCA is made of 16 ga. spun aluminum with a matte white finish and is available in the following slope angles: 5°, 10°, 15°, 20°, 25°, and 30° (maximum). The SCA comes with four perforated tabs that provide temporary support during installation and four locking screws that secure the SCA to the mounting frame of the fixture.

Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group • A0908
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
Accessories/Options SCA
Page 1 of 1 Accessory Sloped Ceiling Adapter
1. Identify Trim Apertue: Complete fixture consists of slope adapter, trim kit, frame-in-kit and SCAHID kit ( if needed) , order each separately.
Catalog Number Aperture Line Voltage CFL HID
7920
4"
A7053, A7701, 7082, 7782,
G7057, A7058MG
8011
C439P20, C420T4,C439T4, C470T4 series frames and
compatible trims.
7924
9 1/2" C9E28
7925
6"
B7054, B7705, B7780, 7084,
7784, E7059, B7760
8021, 8031, 8051, 8052,8091
C6P39,C6P70,C6P10, C670, C610, C639T6,C670T6,
C615T6 series frames and compatible trims.
7926
7" C7055, C7709 , 7790QD, 7794QD 8037, 8022, 8056, 8096, 8097
C770, C710,C715 series frames and compatible trims.
7927
8" 8023, 8038, 8039, 8068
7929
12" C12E28
NOTE: HID All HID applications require SCAHID Kit (sold seperately) SCA NOT compatible with enclosed frame-in-kits.
3/8”
Features
1. Slope Ceiling Adapter: 16 ga. spun aluminum, matte white finish.
Installs with standard recessed fixture in sloped ceilings without changing
the vertical axis of the fixture or its lighting characteristics. *The slope ceiling
adapter is available the following slope angles: 5°, 10°, 15°, 20°, 25°, 30°
(maximum). When ordering, specify Catalog number and Adapter.
Example: Adapter suffix for 7920 series in 20° slope ceiling is 7920MF
2. Perforated Tabs (4): Provide temporary support for the slope ceiling
adapter during installation.
3. Locking Screws (4): Secure slope ceiling adapter to mounting frame of
fixture.
4. Representative Fixture: (shown) Fixture must be supported by ceiling
structure — not Slope Ceiling Adapter.
Alzak
®
is a registered trademark of ALCOA.
Recessed Fixture with Duo-Cast Recessed Fixture with Modular Recessed H.I.D. Fixture without
Reversible Trim Flange Mounting Frame Duo-Cast Trim Flange
Detail of Attaching Fixture to Sloped Ceiling Adapter
2. Specify desired degree of slope ex. 7920MD 4" aperature with 10° Slope
MC 5° MD 10° ME 15° MF 20° MG 25° MH 30°
  • Page 1 1

Lightolier Calculite Accessories/Options SCA User manual

Lightolier
Brand
Lightolier
Model
Calculite Accessories/Options SCA
Type
User manual
This manual is also suitable for

Lightolier Calculite Accessories/Options SCA is a slope ceiling adapter that allows you to install recessed fixtures in sloped ceilings without changing the vertical axis of the fixture or its lighting characteristics. The SCA is made of 16 ga. spun aluminum with a matte white finish and is available in the following slope angles: 5°, 10°, 15°, 20°, 25°, and 30° (maximum). The SCA comes with four perforated tabs that provide temporary support during installation and four locking screws that secure the SCA to the mounting frame of the fixture.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents