NEC Express5800/HV8600 User manual
- Category
- Servers
- Type
- User manual
NEC Express5800/HV8600 is a powerful and scalable high-capacity fault-tolerant server designed for business-critical applications. Its key features include up to eight 500MHz Intel® Pentium® III Xeon™ processors, 8GB of system memory, integrated 3-channel hot-swap Ultra2 SCSI backplane, up to 12 high-speed hot-swap Ultra2 SCSI hard disks, redundant fans, hot-swap disk drives, and redundant/hot-swap power supplies. This server is ideal for large scale enterprise computing, especially for very large database applications.
NEC Express5800/HV8600 is a powerful and scalable high-capacity fault-tolerant server designed for business-critical applications. Its key features include up to eight 500MHz Intel® Pentium® III Xeon™ processors, 8GB of system memory, integrated 3-channel hot-swap Ultra2 SCSI backplane, up to 12 high-speed hot-swap Ultra2 SCSI hard disks, redundant fans, hot-swap disk drives, and redundant/hot-swap power supplies. This server is ideal for large scale enterprise computing, especially for very large database applications.
E XPRESS5800
™
HV8600 SERIES
The Powerful and Scalable High-Capacity Fault-Tolerant Server for Business-Critical Applications
business stay up and running. By balancing
CPU, RAM, and I/O performance between
Intel
®
Pentium
®
III Xeon
™
processors, 8GB
of RAM, and super-speed 80MB/sec Ultra2
SCSI hot-swap 3-channel backplane, the
NEC Express5800 HV8600 handles heavy
database loads with ease.With plenty of
expansion room for additional processors,
memory, cards, and hard disks, the Express5800
HV8600 server is designed to help keep up
with your company’s growing demands for
years to come.
E
xtreme performance on an open system
server. Scalable, fast, and reliable, the
NEC Express5800 HV8600 server uses an
advanced innovative architectural design.
This performance-optimized server solves the
demand for high-speed and high-capacity at
an affordable price. Designed for reliability
and loaded with fault-tolerant features such
as hot-plug PCI, ECC memory, ECC cache,
redundant cooling fans, hot-swap hard disks,
and hot-swap redundant power supplies, the
NEC Express5800 HV8600 server helps your
CPU/MEMORY SUBSYSTEM
CPU: Up to 8 Pentium III Xeon Processors – 500MHz/1MB ECC or
500MHz/2MB ECC
L3 Cache: Aqua II 36-bit, 100MHz, 128MB L3 cache (64MB per 4 CPUs)
with 32MB Tag Capacity and 4-Way Memory Interleaving
Call for latest list of supported processors
RAM: 256MB – 8GB (using 256MB DIMMs)
32 DIMM Slots Total (inserted in fours)
64MB, 128MB and 256MB ECC/EDO 50ns DIMMs Supported
ECC Data Protection with Error Logging
GRAPHICS
Standard: Integrated CIRRUS GD-5465 with 2MB DRAM
Colors @ 16M @ 640 x 480 and @ 800 x 600; 64K @ 1024 x 768; and
Resolution Supported: 1280 x 1024
EXPANSION AND CONNECTIVITY
I/O Slots: 4 x 64b PCI; 4 x 32b Hot-Plug PCI; 2 x 32b PCI; 1 x 32b
PCI/ISA
Disk I/O: Integrated Fast SCSI-2
Integrated 3-Channel Ultra2 SCSI (LVDS) Hot-Swap Backplane
SecuRAID 530 3-Channel Ultra2 SCSI (LVDS) PCI RAID
Controller Included
I/O Connectors: 1 x Fast SCSI-2
1 x 25 Pin Bi-Directional “Enhanced Capabilities Port” (ECP)
Parallel Port
2 x 9 pin Asynchronous Serial Ports
2 x USB
1 x 100Base-TX
PS/2 Style Keyboard and Mouse Ports
15-pin SVGA Port
Hot-Swap Disk Bays: 12 x 1.6"/1" Hot-Swap in 3 Cages
External Disk Bays: 4 x 5.25" (1 contains Std. CD-ROM)
2 x 3.5" (one contains Std. 1.44 FDD
Network Interface: Integrated 3Com
®
53C980 10/100 Ethernet
STANDARD COMPONENTS
Peripherals: 1.44MB Diskette Standard
32X Max./14X Min.Variable-Speed SCSI CD-ROM Standard
Dimensions: 33.46" h x 17.52" w x 28.15" d – 17U When Rack Mounted
Temperature: 50° to 90° F (10° to 30° C)
Weight: 150lb Average
Humidity: 80% @ 36° C (Non-Condensing)
Power: N + 1 Hot-Swap Redundancy Standard
4 x 560W 100-120VAC/200-240VAC Hot Swap Standard With
Separate Power Cords
SOFTWARE – OS CERTIFICATIONS & SERVER MANAGEMENT
Operating System: MicrosoftWindows NT Server Enterprise Edition 4.0 Certified
Management: ESMPRO Server Management Software (Standard);
Integrated Temperature,Voltage, Fan and Chassis Intrusion
REGULATORY COMPLIANCE
FCC Class A
3
, EN 55022 a, EN50082-1 (IEC 801-2,3,4), UL 950,
CSA 22.2 No. 950, EIC950, EN60950, CE Mark
SERVICE AND SUPPORT
3-Year Limited On-Site, Next Business Day Response.
2
SETUP
System Configuration Utility and SecuRAID Drivers for NT.
1
When referring to hard drive capacity, GB stands for one billion bytes. Some utilities may indicate varying
hard drive capacities.Total user-accessibile capacity may vary depending on operating environments.
2
Certain restrictions apply.To obtain a free copy of our limited warranty, call 1-800-632-4525, write to NEC
CSD, Attn:Warranty Department, 8285 West 3500 South, Magna, UT 84044, or see your nearest authorized
reseller.
3
This device is subject to verification to the FCC Class A radio frequency emission standards. It has not
been approved by the Federal Communications Commission for use in a residential environment. It is not,
and may not be offered for sale or lease or sold or leased for use in a residential environment until the
approval of the Federal Communications Commission has been obtained.
NEC Express5800 systems are tailored to meet today’s business needs and tomorrow’s challenges. For more information contact your authorized NEC CSD dealer, or visit
our web site at www.nec-computers.com. ©1999 NEC Computer Systems Division, Packard Bell NEC, Inc. All rights reserved. Express5800 is a trademark of NEC
Corporation used under license. Xeon and the Pentium Xeon logo are trademarks and Pentium is a registered trademark of Intel Corporation. Windows and the Windows
NT logo are registered trademarks of Microsoft Corporation. All other trademarks and registered trademarks are property of their respective owners.The information in
this publication and specifications are subject to change without notice.
NEC Computer Systems Division, Packard Bell NEC, Inc. Printed in U.S.A. 7/99
1 Packard Bell Way, Sacramento, CA 95828 Order Number D-INTELSVR-HV8600799
NEC EXPRESS5800 HV8600 TECHNICAL S PECIFICATIONS
EXPRESS5800
™
HV8600
The use of Microsoft
®
Windows NT
®
in the
enterprise is rapidly increasing, and so is
the demand for a truly high-performance,
high-scalability server.
To answer this need, the NEC Express5800
HV8600 server delivers scalability while
providing reliability and performance when
you need it.
Built for the demands of large scale enterprise
computing, the HV8600 is ideal for very large
database applications.
KEY FETURES
• Up to eight 500MHz Intel
®
Pentium
®
III
Xeon
™
Processors for high-end performance
• NEC Aqua II chipset supplies 36-bit,
100MHz, 128MB L3 cache with 32MB tag
capacity for dramatic performance
• Scales to 8GB system memory for running
memory-intensive applications
• Integrated 3-channel hot-swap Ultra2 SCSI
backplane and matching PCI RAID controller
can deliver the throughput necessary to run
high-transaction applications
• Up to 12 high-speed hot-swap Ultra2 SCSI
hard disks provide 216GB
1
storage capacity
within the same cabinet
• Redundant fans, hot-swap disk drives, and
redundant/hot-swap power supplies provide
fault tolerance for running business-critical
applications
• ESMPRO
™
Server Management Software
for monitoring and control
SERVICE AND SUPPORT
To help ensure your complete satisfaction, each
NEC Express5800 server comes with NEC
UltraCare
SM
limited warranty and support
service
2
.These services are designed to
meet the demands of your business-critical
computing environment.
Each Express5800 HV8600 server comes standard
with a 3-year limited on-site warranty
2
for
parts and labor at no additional cost.This
includes toll-free technical support 24 hours
a day, 7 days a week.
For an additional cost, the standard service
and support package on each Express5800
server may be upgraded by adding a 24 x 7
on-site support option and/or a 4-hour
response service option
2
.
-
1
-
2
NEC Express5800/HV8600 User manual
- Category
- Servers
- Type
- User manual
NEC Express5800/HV8600 is a powerful and scalable high-capacity fault-tolerant server designed for business-critical applications. Its key features include up to eight 500MHz Intel® Pentium® III Xeon™ processors, 8GB of system memory, integrated 3-channel hot-swap Ultra2 SCSI backplane, up to 12 high-speed hot-swap Ultra2 SCSI hard disks, redundant fans, hot-swap disk drives, and redundant/hot-swap power supplies. This server is ideal for large scale enterprise computing, especially for very large database applications.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
NEC Express5800/HX4600 User manual
-
-
-
-
-
-
NEC HV8600 User manual
-
NEC Express5800/R110f-1E User guide
-
-