Eureka 2590 Series User manual

Brand: Eureka

Model: 2590 Series

Category: Vacuum cleaners

Type: User manual

This manual is also suitable for

2590A

Eureka 2590 SeriesDeep Steam Extractor is a versatile device with a variety of features to help you with your cleaning tasks. If you have pets, the deep cleaning capabilities of the Eureka 2590 Series will prove to be especially useful, as it can easily remove pet hair and other debris from carpets and upholstery. Additionally, the powerful suction of the Eureka 2590 makes it great for cleaning up spills and messes on hard floors. With its lightweight design and easy-to-use controls, the Eureka 2590 Series is a great choice for anyone looking for a powerful and versatile cleaning tool.

Deep Steam Extractor

Household Type

OWNERʼS GUIDE

2590 Series

IMPORTANT

Do not return this product to the store.

For assembly problems or questions

contact: Eurekaʼs Customer Service

Division toll free at 1-800-282-2886*,

8 a.m. to 7:30 p.m., (CST), Monday -

Friday and 10 a.m. to 6:30 p.m. Saturday.

*En Mexico llame al (55) 5343-4384

PLEASE RETAIN

We suggest you record the model, type and serial

numbers below. They are located on the silver rating

plate on your cleaner. For prompt and complete

service information, always refer to these numbers

when inquiring about service.

Model & Type ___________________________

Serial No. ______________________________

It is also important to keep your receipt as proof of

date of purchase.

www.eureka.com

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be

followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS

CARPET SHAMPOOER/EXTRACTOR.

WARNING

To reduce the risk of ﬁre, electric shock, or injury.

• Do not immerse product. Use only on surfaces moistened by cleaning

process.

• Do not use outdoors or expose to rain.

• Use only commercially available ﬂoor cleaners intended for machine

application.

• Do not leave the Extractor when plugged in. Turn OFF the switch

and unplug the electrical cord when not in use and before servicing.

• Do not allow to be used as a toy. Close attention is necessary when

used by or near children.

• Use only as described in this manual. Use only manufacturerʼs

recommended attachments.

• Do not use with damaged cord or plug. If the Extractor is not working

properly, has been dropped, damaged, left outdoors, or dropped into

water, return it to a service center immediately.

• Do not pull or carry by cord, use cord as a handle, close a door on

cord, or pull cord around sharp edges or corners. Do not run the

Carpet Shampooer/Extractor over cord. Keep cord away from heated

surfaces.

• Connect to a properly grounded outlet only (refer to Grounding

Instructions).

• Do not use extension cords or outlets with inadequate current carrying

capacity.

• Turn off all controls before unplugging.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the

cord.

• Do not handle plug or Extractor with wet hands.

• Do not put any object into openings. Do not use with any opening

blocked; keep free of dust, lint, hair, and anything that may reduce

airﬂow.

• This Extractor creates suction. Some models also contain a moving

agitator brush. Keep hair, loose clothing, ﬁngers, and all parts of body

away from openings and moving parts.

• Do not pick up anything that is burning or smoking, such as cigarettes,

matches, or hot ﬁreplace or barbecue ashes.

• Do not use without recovery tank in place.

• Use extra care when cleaning on stairs.

• If the machine tips over during use, shut it off immediately, set it upright,

and wait for the motor to stop completely. This allows the ﬂoat to return

to normal position and permits proper airﬂow through the cleaner.

• Do not use to pick up gasoline, acetone, perfumes, colognes, paint

thinners and other ﬂammable liquids or use in places where they may

be present.

• Operate and store indoors in an area above 32°F where the machine

will not freeze.

• Keep your work area well lighted.

SAVE THESE INSTRUCTIONS

GENERAL INFORMATION

NOTE: Thoroughly clean carpet,

upholstery and stairs with a

vacuum cleaner before using

this portable deep cleaner.

Automatic Suction Shut-Off

The automatic suction shut-off functions when

the recovery tank is full of liquid. As the tank ﬁlls,

the ﬂoat (inside the recovery tank) rises until it

shuts off the suction causing the motor sound

to become high pitched. When this happens,

empty the recovery tank.

The automatic suction shut-off also functions if

the portable deep cleaner tips over. To continue

use, turn the portable deep cleaner OFF and

set it upright. Wait a few seconds to allow the

motor to come to a complete stop. Restart the

portable deep cleaner.

Service Information

The instructions in this booklet serve as a guide

to routine maintenance. For additional service

information telephone our toll free number for

the nearest Eureka Authorized Warranty Station.

You should know the model, type and serial

numbers when you call:

USA: 1-800-282-2886

Mexico: (55) 5343-4384

Canada: 1-800-282-2886

If you prefer, you can write to:

Electrolux Home Care Products North America,

Service Division. P.O. Box 3900, Peoria, IL

61612, USA. In Canada write to Electrolux Home

Care Products North America, 866 Langs Drive,

Cambridge, Ontario N3N 2N7. Refer to The

Eureka Limited Warranty for complete service

information.

DO NOT OIL the motor or the agitator

at any time. The bearings have a seal

and are permanently lubricated.

Index

Important Safeguards ........................... 2

General Information .............................. 2

Grounding Instructions ......................... 3

Before You Begin .................................. 3

Feature Guide – Parts .......................... 4

OptiHeat ............................................... 5

Set Up .................................................. 5

Use ....................................................... 6

Clean Up & Storage ............................ 7

Bare Floor Cleaning ............................. 8

Upholstery & Stair Cleaning ................. 9

Warranty ............................................. 10

Problem Solving ..................................11

Grounding Instructions

This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for

electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding

conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded

in accordance with all local codes and ordinances.

DANGER

Improper connection of an equipment-grounding conductor can result in risk of electric shock. Check with a qualiﬁed electrician

or service person if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the

appliance. If it will not ﬁt the outlet, have the proper outlet installed by a qualiﬁed technician.

This appliance is for use on a nominal 120 volt circuit and has a grounding plug that looks like the plug illustrated in Figure

A. A temporary adapter which looks like the adapter illustrated in Figure B may be used to connect this plug to a two-pole

receptacle, as shown, if a properly grounded outlet is not available. The temporary adapter should be used only until a properly

grounded outlet, Figure A, can be installed by a qualiﬁed electrician. The green colored rigid ear, lug, or the like extending

from the adapter must be connected to a permanent ground such as a properly grounded outlet box cover. Whenever the

adapter is used, it must be held in place by a metal screw.

NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code.

Grounding Blade

is Longest of the

Three Blades

Grounded Outlet Box

Figure A

Adapter

Grounded Outlet Box

Metal Screw

Grounding Tab

Figure B

A. Vacuum Carpet

NOTE: Never use this extractor as a standard

vacuum cleaner.

For best results, vacuum carpets with a vacuum

cleaner that has an agitator. The bristles of the

agitator help loosen and remove soil that is deep in

the carpet nap.

B. Pretest for Color Fastness

Before cleaning the carpet, we recommend testing

the carpet for color fastness. Moisten a white towel

with the cleaning solution. Test a small hidden area

of the carpet in a closet or in a corner. Gently rub the

cloth over the carpet. Check each color. If the towel

does not pick up any color, it should be safe to use

the cleaning solution on the entire area. See page 9

for additional information.

C. Remove Furniture

Remove as much furniture from the room as possible.

Place aluminum foil or plastic ﬁlm under or around the

legs and bases of the remaining furniture to prevent

stains. Leave the foil or plastic in place until the carpet

is completely dry. Use masking tape or pins to hold

furniture skirts and draperies up out of the way.

Helpful Hints for Deep-Cleaning Carpet

Follow the instructions in this ownerʼs guide. Here are a few

extra hints that will make deep-cleaning carpet easier.

• Before you begin using the extractor, vacuum carpet

thoroughly.

• Do not use the extractor for dry vacuuming as this

can damage the unit.

• Use consistent forward and reverse strokes over the

carpet surface.

• Ventilate the room while cleaning to speed drying.

• If the carpet shampooer/extractor is difﬁcult to push

when operating, try pushing the cleaner at a different

90 degree angle so it moves with the grain and not

against the grain of the carpet ﬁbers.

Do Not Use on Oriental rugs.

After Cleaning

• Allow carpets to dry thoroughly. Try to keep children

and pets off the carpet until it is completely dry.

• Use towels or white cloths to step on if you must walk

on the area before it is dry.

• Wipe cleaning solution from woodwork and wood

furniture immediately to prevent damage to the wood

or upholstery.

• If furniture must be placed back in the room before the

carpet is dry, use aluminum foil or plastic under the

furniture legs to prevent staining the carpet.

BEFORE YOU BEGIN

Feature Guide

NOTICE

ON MODELS WITH THE

ACCESSORY HOSE, YOU

MAY NOTICE SMALL WATER

DROPLETS IN THE WATER

LINE. THIS IS DUE TO THE

FACT THAT ALL UNITS

ARE 100% INSPECTED ON

THE PRODUCTION LINE

USING WATER TO ASSURE

PROPER FUNCTION OF

THE ACCESSORIES.

Cord Hook

Clear Suction Cover

Upper Handle Release

Carrying Handle

Recovery Tank

Clean Water Tank

Suction Cover Release

Shampoo Bottle

Hose Inlet Cover

Power Switch

Quick Release

Cord Hooks

Shampoo Contol

Handle

Release Pedal

Store Electrical Cord

• Wrap cord around cord hooks.

Suction Cover Release

Shampoo/Rinse

Button

STEP

SET UP

A. Fill Shampoo Bottle

If handle is folded, lift handle to operating position.

1) Lift up and pull out the shampoo bottle, ﬁll with

Eureka Carpet & Upholstery Concentrate only.

2) Close cap tightly, and replace shampoo bottle.

3) Gently push until the shampoo bottle snaps into

place.

NOTE: When moving the extractor from one location to another, always make sure the recovery and clean water

solution tanks are completely empty. Then tilt the unit slightly backward and roll on rear wheels, fold the looped

handle and use the carrying handle for transporting up and down stairs.

NOTE: Familiarize yourself with the parts of the extractor by reading this ownerʼs

manual before using.

IMPORTANT: For best results, begin with a clean surface by vacuuming surface or

item before using the extractor.

B. Fill Clean Water Tank

1) Lift up and pull out clean water tank.

2) Fill tank to the designated ﬁll line with hot tap water

(not boiling), replace cap.

3) Gently push until the clean water tank snaps back

into position.

Shampoo

Bottle

Clean

Water

Tank

Cap

OptiHEAT™ Heat Retention System (Available on Some Models Only)

IMPORTANT: Fill clean water tank with hot tap water. Do not use boiling water.

Why is heated cleaning better?

Testing has shown that cleaning with hot tap water at the normal household temperature (110º to 120º) actually cleans better

than cold water or water at room temperature. Using water at temperatures above the normal level does not signiﬁcantly

increase cleaning ability.

What is OptiHEAT™?

Eureka's exclusive OptiHEAT™, Heat Retention System, maintains the temperature of the clean water so you are always

cleaning at the optimal temperature. The unique OptiHEAT™ tank system is designed to keep hot tap water within the optimal

temperature zone for a normal period of use.

C. Emptying the Recovery Tank

CAUTION: Turn off the power switch and unplug the extractor to empty the recovery tank.

1) Pull straight up to remove the recovery tank from the unit.

2) Remove the automatic shut-off (see illustration) and empty contents

into a suitable water drain.

3) Rinse out the waste water recovery tank thoroughly.

4) Remove and clean the ﬂoat and ﬁlter by rinsing it with water after each

use. Place the same ﬂoat and ﬁlter back into the recovery tank.

5) Gently push the tank all the way into unit until secure.

6) Resume cleaning or store.

STEP

USE

A. Carpet Cleaning

1) Adjust shampoo control, from

MAX = for heavy trafﬁc areas to

RINSE = clear water only.

2) Plug in cord.

3) Lift handle to operating position.

Shampoo

Control

Handle

Release Pedal

4) Push power switch to II position for agitation of brush.

5) Push the handle foot release and recline handle to use position.

Push shampoo/rinse button and hold to apply solution and

move the unit forward and then backward at a moderate pace

two times. As the nozzle moves over the carpet, the cleaning

solution is sprayed onto the carpet. At the same time the nozzle

picks up the dirty water and places it in the recovery tank. It is

important to move the unit in a steady motion.

6) Release the button to stop the solution ﬂow. Avoid over-

soaking.

7) Move the extractor over the carpet several more times without

pushing the shampoo/rinse button. This removes excess water

and helps the carpet dry faster.

8) Repeat steps 5, 6, and 7 on heavily soiled areas.

Power Switch

II Brushes

I Suction Only

0 OFF

Shampoo/

Rinse

Button

Carrying

Handle

B. Transporting the Extractor

When moving the unit from one location to another, always make

sure the recovery and clean water solution tanks are completely

empty. Then tilt the unit slightly backward and roll on rear wheels

or use the carrying handle for transporting up and down stairs.

(See page 4)

D. Automatic Shut-Off

The automatic suction shut-off functions when the waste water recovery tank is

full of liquid. This can be detected by a noticeable difference in the motor sound.

Immediately turn off the unit when this happens and empty the recovery tank.

Automatic

Suction

Shut-Off

Recovery

Tank

Filter

STEP

CLEAN UP AND STORAGE

Before storing the extractor for long periods of time, it is a good idea to set the shampoo

control on rinse and push the spray button for 10 seconds. This ﬂushes the shampoo residue

from the pump. Place cleaner on a surface where water can easily be cleaned up. If any

attachments have been used clear hose line in same way.

A. Empty the Recovery Tank

See page 6 for instructions.

B. Clean Suction Cover

CAUTION: Turn off the power switch and unplug the electrical cord before cleaning.

1) Slide the suction cover release tabs up on each side of the suction cover.

2) Remove the suction cover and clean the area of dirt and lint.

3) Replace the suction cover by sliding the tabs on top of the suction cover into the top slots on the hood.

Suction Cover

Release Tabs

Suction

Cover

C. Folding the Handle for Compact Storage

1) Turn upper handle release to collapse the upper handle.

2) Press on handle release pedal to fully collapse handle.

Upper Handle

Release

Handle

Release

Pedal

Upper

Handle

Release

Brush Attachment Foam Pad Attachment

(not included on all models)

Squeegee Attachment

(not included on all models)

A. Pull brush attachment out of

cleaner base.

C. Attach squeegee on front of

suction cover.

B. Replace brush attachment with

foam pad attachment.

BARE FLOOR CLEANING (Not included on all models)

NOTE: Do not use on natural hardwood ﬂoors.

NOTE: Use Eureka Carpet & Upholstery Concentrate only.

CAUTION: Turn off the power switch and unplug the extractor to empty the recovery tank.

CAUTION: Always attach the foam pad and squeegee for bare ﬂoor cleaning.

D. Store the Accessories

1. Replace all accessories into appropriate slots on tool caddy.

2. Tool caddy ﬁts perfectly on top of the extractor for storage, (see below) or you can store tool caddy by hanging it

on the wall with screws (slots on back of tool caddy will slide over screws to secure to the wall).

CLEAN UP AND STORAGE (Continued)

Brush

Attachment

Hose

Foam Pad

Attachment

(not included

on all models)

Upholstery

Attachment

(Turbo

upholstery

attachment not

included on all

models)

Squeegee

Attachment

(not included

on all models)

Screw Holes

(on back of unit)

CAUTION: Be extra careful when cleaning on stairs.

To prevent the carpet shampooer/extractor from falling, do not place the unit on stairs. It is suggested that

the carpet shampooer/extractor be placed at ﬂoor level to clean the lower portion of the stairs and be securely

placed at the top of the stairway to clean the upper portion of the stairs.

Hose Inlet Plug

A. Lift up the hose inlet cover.

B. Slide the accessory hose into the slot until it clicks into place.

C. Attach the upholstery brush to the end of the hose.

Turbo

Upholstery Brush

(On some models)

Upholstery

Brush

Solution

Trigger

Attachment

Release

B. Check the stufﬁng material if

possible

Look inside the cushions or on the underneath side. If ﬁlling

is a dark color, it may bleed through and discolor the fabric.

Most stufﬁng material that is white to light yellow is colorfast

and will not bleed colors through to the fabric covering.

C. Test clean a hidden area

Be sure to test clean a hidden area several hours before

starting to clean. Let the test area dry completely. Inspect

for changes in color, bleeding, stretching, or shrinking. Test

another area if in doubt.

D. Pretest for Color Fastness

Before cleaning the upholstery, we recommend testing it

for color fastness. Moisten a white towel with the cleaning

solution. Test a small area of the cushion back. Gently rub

the cloth over the area. Check each area for color bleeding.

If the towel does not pick up any color, it should be safe to

use the cleaning solution on the entire area.

A. Vacuum Upholstery or Stairs

Vacuum upholstery and stairs with a vacuum cleanerʼs

attachment tool. Use a crevice tool for hard to reach areas

such as tufts and corners.

IMPORTANT: Cleaning some upholstery fabrics

with a wet cleaning solution may

damage the fabric. Know what the

fabric content is and how to clean it

before using a cleaning solution on

upholstery fabrics.

Most manufacturers care code their fabrics with cleaning

methods. Some very delicate and unusual fabrics are DRY

CLEAN ONLY. If in doubt of the fabric type, call a dealer or

take a cushion or arm cover to a dealer for advice.

Fabric Code Ratings:

•

for wet clean.

•

S-W

for solvent-dry or wet clean.

•

for solvent-dry clean only. Do not wet clean.

UPHOLSTERY AND STAIR CLEANING:

Before You Begin

D. Place the Upholstery Nozzle at the top of the cleaning

area.

E. Pull up and hold the solution release trigger and pull the

nozzle backward at a moderate pace for no more than

ﬁve seconds to avoid over soaking.

F. Release the trigger at the end of the stroke.

G. Lift nozzle and start again at the top. Apply one to three

spraying strokes. Avoid over-soaking the area.

NOTE: As the nozzle moves over the surface, the

cleaning solution sprays onto the surface. At

the same time the nozzle picks up the dirty

water and places it in the recovery tank.

H. Move the nozzle over the surface several more times

without engaging the trigger. This removes excess water

and helps the surface dry faster.

I. Press release button on top of hose to release

attachment.

J. After using attachment make sure hose inlet cover is

fully closed.

K. Clean upholstery brush attachment after use. Press

attachment release to remove from hose, pull suction

cover open, rinse under warm running water. Replace

on hose or store in caddy.

UPHOLSTERY AND STAIR CLEANING

(Continued)

Upholstery

Brush

Solution

Trigger

Attachment

Release

THE EUREKA LIMITED WARRANTY

What This Warranty Covers

Your Eureka cleaner is warranted to be free from all defects in material and

workmanship in normal household use for a period of one year. The warranty is granted

only to the original purchaser and members of his or her immediate household. The

warranty is subject to the following provisions.

What This Warranty Does Not Cover

• Parts of the cleaner that require replacement under normal use, such as disposable dust

bags, ﬁlters, drive belts, light bulbs, and brush roll bristles, impellers and cleaning.

• Damages or malfunctions caused by negligence, abuse, or use not in accordance with

the Ownerʼs Guide.

• Defects or damages caused by unauthorized service or the use of other than Genuine

Eureka parts.

What the Manufacturer Will Do

The manufacturer will, at its option, repair or replace a defective cleaner or cleaner part

that is covered by this warranty. As a matter of warranty policy, the manufacturer will

not refund the consumerʼs purchase price.

Warranty Registration

Please ﬁll out and return the warranty registration card accompanying your cleaner.

Obtaining Warranty Service

To obtain warranty service you must return the defective cleaner or cleaner part along

with proof of purchase to any Eureka Authorized Warranty Station.

You will ﬁnd the nearest location in the Yellow Pages, under “Vacuum Cleaners

– Service and Repair.” Be certain that the Warranty Station is “Eureka Authorized.”

For the location of the nearest Eureka Authorized Warranty Station or for service

information, telephone toll free:

USA: 1-800-282-2886

Mexico: (55) 5343-4384

Canada: 1-800-282-2886

If you prefer you can write to Electrolux Home Care Products North

America, P O Box 3900, Peoria, Illinois 61612, USA. In Canada write

to Electrolux Home Care Products Canada, 866 Langs Drive, Cambridge,

Ontario N3H 2N7.

If it is necessary to ship the cleaner outside your community to obtain warranty repair,

you must pay the shipping charges to the Eureka Authorized Warranty Station.

Return shipping charges will be paid by the Warranty Station. When returning

parts for repair, please include the model, type, and serial number from the data plate

on the cleaner.

Further Limitations and Exclusions

Any warranty that may be implied in connection with your purchase or use of the

cleaner, including any warranty of Merchantability or any warranty for Fitness For

A Particular Purpose is limited to the duration of this warranty. Some states do not

allow limitations on how long an implied warranty lasts, so the above limitations may

not apply to you.

Your relief for the breach of this warranty is limited to the relief expressly provided

above. In no event shall the manufacturer be liable for any consequential or incidental

damages you may incur in connection with your purchase or use of the cleaner. Some

states do not allow the exclusion or limitation of incidental or consequential damages,

so the above limitation or exclusion may not apply to you.

This warranty gives you speciﬁc legal rights. You may also have other rights which

vary by state.

Questions & Answers about Genuine Eureka Products

Q: Why should I use only Genuine Eureka paper bags, belts, and parts in my Eureka

vacuum cleaner?

Using Genuine Eureka Products, which are made to exacting speciﬁcations and

engineered with emphasis on quality, performance, and customer satisfaction,

ensures the long life and cleaning efﬁciency of your vacuum cleaner. Overall,

this saves you money and helps to keep your home clean.

Q: How can I be sure I am using only genuine Eureka products in my vacuum

cleaner?

Typically, packaged products and paper bags can be identiﬁed by a “Genuine

Eureka Product” symbol (see illustration above). For further identiﬁcation

assistance, you may call our toll-free number, 1-800-282-2886, for the location

of a nearby Eureka Authorized Warranty Station.

Q: Are there any differences between “made to ﬁt” or “imitation” and Genuine

Eureka paper bags, belts, and parts?

Yes, there are some very important differences in materials, quality, and

reliability. Many customers have mistakenly purchased “imitation” paper

bags and parts while thinking they purchased genuine. Unfortunately, many

of these customers discovered the differences after they experienced related

difﬁculties.

For Genuine Eureka Value, Accept No Imitations!

GENUINE

EUREKA PRODUCT

Eureka 2590 Series User manual

Brand: Eureka

Model: 2590 Series

Category: Vacuum cleaners

Type: User manual

This manual is also suitable for

2590A

Download PDF

report

Eureka 2590 Series User manual

This manual is also suitable for

Eureka 2590 Series User manual

Related papers

Other documents