Contents

Contents .................................................................................................................... 3

Safety Warnings ....................................................................................................... 4

Scooter parts and headset for Ch-401 ................................................................... 5

Assembling instructions for Ch-401 ....................................................................... 6

Scooter parts for Ch-409/417/418 ........................................................................ 6

Headset and Assembling instructions for Ch-409/417/418 ............................... 7

Scooter parts for Ch-419 ......................................................................................... 8

Headset and Assembling instructions for Ch-419 ................................................ 9

HEAD SET FOR CH-401

Part No. Part Name QTY

Grip 1PC

Handle Bar 1PC

Clamp 1PC

Brake 1PC

Wheel 2PCS

FOR CH-409/417/418

1) Make sure that the compression bolt have been tightened. Insert the handlebar into the clamp and

afterwards insert the handlebar into the front fork.

③

④

Handle Bar

Clamp

Brake 1PC

FOR CH-419

Grip 1PC

1PC

Bolt

Washer

1PC

2 ) Insert the handlebar into the SCS shim, and put the handlebar in the clamp then.

Make sure that the grips of the handlebar stay perpendicular to the front wheel. After-

wards tighten the clamp screws with 5mm Allen wench.

1 ) Insert SCS clamp on the fork, and afterwards put the top cap and M6 bolt into the

clamp to lock the fork.

HEAD SET FOR CH-419