Contents
Contents .................................................................................................................... 3
Safety Warnings ....................................................................................................... 4
Scooter parts and headset for Ch-401 ................................................................... 5
Assembling instructions for Ch-401 ....................................................................... 6
Scooter parts for Ch-409/417/418 ........................................................................ 6
Headset and Assembling instructions for Ch-409/417/418 ............................... 7
Scooter parts for Ch-419 ......................................................................................... 8
Headset and Assembling instructions for Ch-419 ................................................ 9
Correct techniques of use and braking ................................................................ 10
Checking and maintenance instructions.............................................................. 10
Parts to check and make maintenance ............................................................... 10
Parts to check and make maintenance .............................................................. 11
- 3 -
- 4 -
FOR CH-401
HEAD SET FOR CH-401
Part No. Part Name QTY
Grip 1PC
Handle Bar 1PC
Clamp 1PC
Front Fork 1PC
Deck 1PC
Brake 1PC
Wheel 2PCS
TOP PART BOTTOM PART
B
L
I
T
Z
B
L
I
T
Z
- 5 -
FOR CH-401
FOR CH-409/417/418
1) Make sure that the compression bolt have been tightened. Insert the handlebar into the clamp and
afterwards insert the handlebar into the front fork.
③
④
⑤
⑧
⑨
⑨
2)
Part No. Part Name QTY
Grip 1PC
Handle Bar
1PC
Clamp
Cap
Shim
1PC
1PC
1PC
Front Fork 1PC
Deck 1PC
Brake 1PC
Wheel 2PCS
- 6 -
HEAD SET FOR CH-409/417/418
FOR CH-409/417/418
1) Make sure that the compression bolt have been tightened on the HIC shim. Insert the handlebar into
the clampand afterwards insert the handlebar into the front fork.
2)
TOP PART BOTTOM PART
- 7 -
FOR CH-419
Part No. Part Name QTY
Grip 1PC
Handle Bar
1PC
Clamp
Bolt
Washer
1PC
1PC
1PC
Front Fork 1PC
Deck 1PC
Brake 1PC
Wheel 2PCS
- 8 -
FOR CH-419
2 ) Insert the handlebar into the SCS shim, and put the handlebar in the clamp then.
Make sure that the grips of the handlebar stay perpendicular to the front wheel. After-
wards tighten the clamp screws with 5mm Allen wench.
1 ) Insert SCS clamp on the fork, and afterwards put the top cap and M6 bolt into the
clamp to lock the fork.
HEAD SET FOR CH-419
TOP PART BOTTOM PART
- 9 -
- 10 -
- 11 -
/
