3.7 Energy
saving and high reliability
By adopting high efficiency plate heat exchanger, the energy consumption can be reduced.
a. Meta
llic protective cabinet with rustproof polyester paint;
b. Built-in with voltage protection, current protection, anti-freezing protection, water flow protection and
etc., effectively guarantee the system to work safely.
3.8 User friendly remote control
Switch SW4_1(10kW) or SW3_1(12-16kW) on the PCB to ON to enable the following remote control
functions. The setting is not default at factory.
Remote shut down
Remote cooling and heating
Note: When all controll
er controls together, the unit will work according to the last order.
5/7kW will be available soon.
3.9 Flexible and convenient control
Built-in
electronic controller at factory.
Compact devices with advanced function and friendly user interface.
The chiller can be controlled by wired controller (KJR-120F1/BMK-E)
also which is optional chosen.
Note: When connecting wired controller, outdoor unit control panel is mainly used for display which can
check parameters and inquiry, and can’t be used to set mode and temperature.
Built-in water pressure gauge. Inspect the water pressure all the time.
3.10 Integrated and compact design
Fully integrated and built-in hydraulic module, such as expansion tank, plate type of heat exchanger,
water circulating pump, etc. It saves installation space and cost.
3.11 EXV control flow more precisely
Patented liquid distribution components to maximize performance and minimize defrost impact.
KJR-120F1/BMK-E
(CL92340)
Mini Chiller DC Inverter MUENR-H4