Clinton Electronics CE-BZ3HD User manual

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near

water.

6. Clean only with dry cloth.

7. Do not block any ventilation

openings. Install in accordance

with the manufacturer’s instruc-

tions.

8. Do not install near any heat

sources such as radiators, heat

registers, stoves, or other appara-

tuses (including amplifiers) that

produce heat.

9. Do not defeat the safety pur-

pose of the polarized or ground-

ing-type plug. A polarized plug has

two blades with one wider than

the other. A grounding type plug

has two blades and a third ground-

ing prong. The wide blade or the

third prong are provided for your

safety. If the provided plug does

not fit into your outlet, consult an

electrician for replacement of the

obsolete outlet.

10. Protect the power cord from

being walked on or pinched partic-

ularly at plugs, convenience recep-

tacles, and the point where they

exit from the apparatus.

11. Only use attachments/accesso-

ries specified by the manufacturer.

12. Use only with the cart, stand,

tripod, bracket, or table speci-

fied by the manufacturer, or sold

with the apparatus. When a cart

is used, use caution when moving

the cart/apparatus combination to

avoid injury from tip-over.

13. Unplug this apparatus during

lightning storms or when unused

for long periods of time.

14. Refer all servicing to qualified

service personnel. Servicing is

required when the apparatus has

been damaged in any way, such

as power-supply cord or plug is

damaged, liquid has been spilled

or objects have fallen into the ap-

paratus, the apparatus has been

exposed to rain or moisture, does

not operate normally, or has been

dropped.

INFORMATION: This equipment has been tested and found to comply with limits

for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the

equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at

his own expense.

DISCLAIMER: Clinton Electronics reserves the right to change the contents of this

manual without prior notice.

WARNING: Changes or modifications not expressly approved by the manufacturer

could void the user’s authority to operate the equipment.

CAUTION: To prevent electric shock and risk of fire hazards:

u Do NOT use power sources other than that specified.

u Do NOT expose the inside of this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

In USA and Canada, Use Class 2 Power Supply Only

The lightning flash with an arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the product’s enclosure that may be of suf-

ficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

TABLE OF CONTENTS

The material in this document is subject to change without notice. While reasonable eorts have been made to assure the

accuracy of this document, Clinton Electronics and it’s employees assume no liability resulting from errors or omissions in

this document, or from the use of the information contained herein. Clinton Electronics reserves the right to make changes

or revisions in the product design or the product manual without reservation and without obligation to notify any person of

such revisions and changes.

Main Menu

Zoom Focus

Exposure

White Balance

Image Adjust

Backlight

Day & Night

Special

System

Troubleshooting

EX-SDI Install Tips

1

2

3

5

6

8

9

10

13

15

16

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

OFF

EXT-IN

ZOOMFOCUS

AF MODE

DISTANCE

ZOOM SPEED

LENS RESET

E. ZOOM

CONSTANT

1.0m

7

ON

OFF

[BACK] [SAVE] [DFLT]

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

OFF

EXT-IN

EXPOSURE

MODE

AGC

SHUT SPEED

IRIS

DSS

FLICKERLESS

AUTO

ON

- - -

OFF

[BACK] [SAVE] [DFLT]

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

OFF

EXT-IN

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

OFF

EXT-IN

WHITE BAL

MODE

RED GAIN

BLUE GAIN

AUTO

- - -

[BACK] [SAVE] [DFLT]

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

OFF

EXT-IN

8

COMP

10

7

0.55

MIDDLE

OFF

IMAGE ADJ

BRIGHTNESS

BLACK LVL

SATURATION

SHARPNESS

GAMMA

DNR

ACE

[BACK] [SAVE] [DFLT]

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

OFF

EXT-IN

8

COMP

10

7

0.55

MIDDLE

OFF

IMAGE ADJ

BRIGHTNESS

BLACK LVL

SATURATION

SHARPNESS

GAMMA

DNR

ACE

[BACK] [SAVE] [DFLT]

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

WDR

EXT-IN

MIDDLE

WDR

LEVEL

[BACK] [SAVE] [DFLT]

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

OFF

EXT-IN

5sec

ON

DAY&NIGHT

DELAY

BURST

[BACK] [SAVE] [DFLT]

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

OFF

EXT-IN

SPECIAL

ROTATE

HLC

DEFOG

MOTION DET

PRIVACY

DIS

OFF

[BACK] [SAVE] [DFLT]

CLINTON

ZOOMFOCUS

EXPOSURE

WHITE BAL

IMAGE ADJ

BACKLIGHT

DAY&NIGHT

SPECIAL

SYSTEM

[EXIT] [SAVE] [DFLT]

1.

2.

3.

4.

5.

6.

7.

8.

OFF

EXT-IN

SYSTEM

SDI OUTPUT

FRAME RATE

VIDEO SYS

CAM TITLE

DISP SEL

LANGUAGE

HD-SDI

1080p/30

NTSC

OFF

ENGLISH

[BACK] [SAVE] [DFLT]

Clinton Electronics CE-BZ3HD User manual

This manual is also suitable for

Clinton Electronics CE-BZ3HD User manual

Related papers

Other documents