American Standard Ceramix 2000.101X User manual

Category
Sanitary ware
Type
User manual

This manual is also suitable for

C15
© 2008 AS America Inc.
CERAMIX
SINGLE CONTROL LAVATORY FAUCET
2000.101X Shown
MODEL NUMBER:
2000.101 Lavatory Faucet
Metal Speed Connect
®
pop-up drain. Escutcheon plate.
2000.100 Lavatory Faucet
Less drain. Less hole and pop-up rod. Escutcheon plate.
2000.101X Lavatory Faucet
Metal Speed Connect pop-up drain. Less escutcheon plate.
AVAILABLE ACCESSORY:
2000.102P Escutcheon Plate Only
PRODUCT FEATURES:
Brass Construction:
Durable. Easy to clean.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Low Lead:
Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Exclusive Speed Connect Metal Drain:
Fewer parts. Installs in less time.
No adjustments required - seals the first time, every time.
Flexible stainless steel cable - installs effortlessly in tight spaces.
Choice of Finishes: Available in Polished Chrome or Satin
Nickel (PVD).
SUGGESTED SPECIFICATION:
Single control lavatory fitting shall feature a cast brass body with all metal handle. Shall also feature washerless ceramic disc
valve cartridge. Fitting shall be equipped with a hot limit safety stop. Shall also feature a metal drain body with stainless steel
cable actuation. Fitting shall be American Standard Model # 2000.____.____.
GENERAL DESCRIPTION:
Cast brass body and brass escutcheon (on applicable models)
with all metal handle. Washerless 47mm ceramic disc valve
cartridge. Equipped with a hot limit safety stop. Braided
flexible supply hoses with 3/8" compression connectors. 20
inch (500mm) long flexible stainless steel drain cable is
pre-assembled to spout. Metal Speed Connect
®
drain body
with 1-1/4 inch (32mm) tail piece. 1.5 gpm/5.7L/min. maximum
flow rate.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Product
Number
Description
Finish Options
002
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
PVD
Satin
Nickel
295
2000.101 Lavatory faucet. Metal Speed Connect
®
Pop-up drain. Escutcheon plate.
2000.100 Lavatory faucet. Less drain, less pop-up hole and rod. Escutcheon plate.
N/A = NOT AVAILABLE
2000.101X
Lavatory faucet. Metal Speed Connect Pop-up drain. Less escutcheon.
2000.102P
Escutcheon plate only.
N/A
29mm
(1-1/8 MAX)
62mm
(2-7/16)
58mm
(2-1/8)
DIA.
117mm
(4-5/8)
SINGLE HOLE INSTALLATION
WALL
MOUNTING
SURFACE
25mm
(1)
MIN.
32mm
(1-1/4)
MOUNTING
HOLE
Polished
Chrome
32mm OD
(1-1/4 OD)
450mm
(17-3/4)
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
C16
© 2008 AS America Inc.
CERAMIX
SINGLE CONTROL LAVATORY FAUCET
2000.101X Shown
MODEL NUMBER:
2000.101 Lavatory Faucet
Metal Speed Connect
®
pop-up drain. Escutcheon plate.
2000.100 Lavatory Faucet
Less drain. Less hole and pop-up rod. Escutcheon plate.
2000.101X Lavatory Faucet
Metal Speed Connect pop-up drain. Less escutcheon plate.
AVAILABLE ACCESSORY:
2000.102P Escutcheon Plate Only
PRODUCT FEATURES:
Brass Construction:
Durable. Easy to clean.
Ceramic Disc Valve Cartridge: Assures a lifetime of
drip-free performance.
Adjustable Hot Limit Safety Stop: Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Low Lead:
Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Exclusive Speed Connect Metal Drain:
Fewer parts. Installs in less time.
No adjustments required - seals the first time, every time.
Flexible stainless steel cable - installs effortlessly in tight spaces.
Choice of Finishes: Available in Polished Chrome or Satin
Nickel (PVD).
SUGGESTED SPECIFICATION:
Single control lavatory fitting shall feature a cast brass body with all metal handle. Shall also feature washerless ceramic disc
valve cartridge. Fitting shall be equipped with a hot limit safety stop. Shall also feature a metal drain body with stainless steel
cable actuation. Fitting shall be American Standard Model # 2000.____.____.
GENERAL DESCRIPTION:
Cast brass body and brass escutcheon (on applicable models)
with all metal handle. Washerless 47mm ceramic disc valve
cartridge. Equipped with a hot limit safety stop. Braided
flexible supply hoses with 3/8" compression connectors. 20
inch (500mm) long flexible stainless steel drain cable is
pre-assembled to spout. Metal Speed Connect
®
drain body
with 1-1/4 inch (32mm) tail piece. 1.5 gpm/5.7L/min. maximum
flow rate.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Product
Number
Description
Finish Options
002
Meets the American Disabilities Act Guidelines
and ANSI A117.1 Requirements for the
physically challenged.
PVD
Satin
Nickel
295
2000.101 Lavatory faucet. Metal Speed Connect
®
Pop-up drain. Escutcheon plate.
2000.100 Lavatory faucet. Less drain, less pop-up hole and rod. Escutcheon plate.
N/A = NOT AVAILABLE
2000.101X
Lavatory faucet. Metal Speed Connect Pop-up drain. Less escutcheon.
2000.102P
Escutcheon plate only.
N/A
29mm
(1-1/8 MAX)
62mm
(2-7/16)
58mm
(2-1/8)
DIA.
117mm
(4-5/8)
SINGLE HOLE INSTALLATION
WALL
MOUNTING
SURFACE
25mm
(1)
MIN.
32mm
(1-1/4)
MOUNTING
HOLE
Polished
Chrome
32mm OD
(1-1/4 OD)
450mm
(17-3/4)
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
10080604020
  • Page 1 1
  • Page 2 2

American Standard Ceramix 2000.101X User manual

Category
Sanitary ware
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI