American Standard 7186101.002 Installation guide

Category
Sanitary ware
Type
Installation guide

This manual is also suitable for

© 2015 AS America, Inc.
FLUENT
®
SINGLE CONTROL LAVATORY FAUCET
MODEL NUMBER:
7186.101 Single Control Lavatory
Metal Speed Connect
®
pop-up drain. Metal lever handle.
AVAILABLE ACCESSORY:
2000.102P Escutcheon Plate Only
GENERAL DESCRIPTION:
Brass body. Washerless 35 mm ceramic disc valve
cartridge with integral hot limit safety stop. Braided
exible supply hoses with 3/8" compression connectors.
20" (500 mm) long exible stainless steel drain cable is
pre-assembled to faucet body. Metal Speed Connect
®
drain body with 1-1/4" (32 mm) tail piece. 1.2 gpm/4.5 L/min.
maximum ow rate. Fitting can be mounted on 4" centers
using optional escutcheon (2064.101P) or single hole
mounting method.
PRODUCT FEATURES:
Ceramic Disc Valve Cartridge: Assures a lifetime of
smooth handle operation and drip-free performance.
Exclusive Speed Connect Metal Drain:
• Fewer parts. Installs in less time.
• No adjustments required - seals the rst time, every time.
Flexible stainless steel cable - installs effortlessly in
tight spaces.
Lead Free: Faucet contains ≤ 0.25% total lead content by
weighted average.
SUGGESTED SPECIFICATION
Single control lavatory faucet shall feature a brass swivel spout and metal lever handle. Shall also feature washerless ceramic
disc valve cartridge. Shall also feature a metal drain body with stainless steel cable actuation. Fitting shall be American
Standard Model # 7186.101.___.
OPTIONAL
ESCUTCHEON
PLATE
1-1/4" OD
(32 mm OD)
1-3/8"
(35 mm) DIA.
MOUNTING
HOLE
3/8" COMPRESSION
CONNECTORS
2-1/4"
(57 mm) MAX.
22"
(560 mm)
5-1/4"
(134 mm)
7-3/4"
(198 mm)
6-7/8"
(167 mm)
8/7/8"
(221 mm)
Ø 2-1/8"
(55 mm)
4-3/8"
(112 mm)
7" MAX
(178 mm MAX)
2-1/2"
(64 mm)
6-1/4"
(159 mm)
Revised 12/15
© 2015 AS America, Inc.
FLUENT
®
SINGLE CONTROL LAVATORY FAUCET
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9 and Annex G
CSA B125.1
Revised 12/15
FLOW RATE*
GALLONS PER MINUTE
INLET PRESSURE (PSI)
*Flow rates shown are for mixed hot and cold.
0.0
0.2
0.4
0.6
0.8
1.0
1.2
1.4
806040200
Meets the American Disabilities Act Guidelines and ANSI A117.1
Requirements for the physically challenged.
Product
Number Description
Finish Options
Polished
Chrome
Oil Rubbed
Bronze
PVD
Satin Nickel
002 224 295
7186101
Fluent
single control lavatory faucet.
Metal Speed Connect
®
pop-up drain.
2000.102P
Optional Escutcheon Plate Only (For mounting on 4" menters)
  • Page 1 1
  • Page 2 2

American Standard 7186101.002 Installation guide

Category
Sanitary ware
Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI