Motorola DCT1200 User manual

Type
User manual

This manual is also suitable for

Digital Cable Box
USER MANUAL
DCT 5100 HD
Wiring Instructions
Additional Information
Seaside TV
WARNING
TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION
TO PREVENT ELECTRICAL SHOCK, DO NOT USE THIS (POLARIZED) PLUG
WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS
THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point, within an equilateral triangle, is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
CAUTION:
Graphical Symbols and supplemental warning marking locations on bottom of terminal.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
1
Read instructions
All the safety and operating instructions should be read before the digital cable box is operated.
2
Retain instructions
The safety and operating instructions should be retained for future reference.
3
Heed warnings
All warnings on the digital cable box and in the operating instructions should be adhered to.
4
Follow instructions
All operating and use instructions should be followed.
5
Cleaning
Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or ae
rosol
cleaners. Use a damp cloth for cleaning.
6
Attachments
Do not use attachments not recommended as they may cause hazard.
7
Water and moisture
Do not use this equipment near water; for example, near a bathtub, wash bowl, kitchen sink, or
laundry- tub, in a wet basement, or near a swimming pool, and the like.
8
Accessories
Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall
causing serious injury and serious damage to the appliance. Use only with a cart, stand,
tripod,
bracket, or table recommended by the manufacturer, or sold with the equipment. Any mounting of
the appliance should follow the manufacturer’s instructions, and should use a mounting accessory
recommended by the manufacturer.
9
Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the equipment and to protect it from overheating. The openings should never be blocked by
placing the product on a bed, sofa, rug, or similar surface. Equipment should
never be placed near
or over a radiator or heat register, or in a built- in installation such as a bookcase or rack unless
proper ventilation is provided.
10
Power sources
This product should be operated only from the type of power sources indicated on the mar
king
label. If you are not sure of the type of power supplied to your home, consult your local power
company. For equipment intended to operate from battery power, or other sources, refer to the
operating instructions.
11
Ground or polarization
This equipment may be equipped with a polarized alternating
- current line plug (a plug having one
blade wider than the other). This plug will t into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug
should still fail to t, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
12
Alternate warnings
This equipment may be equipped with a 3
- wire grounding - type plug , a plug having a third
(grounding) pin. This pin will only t into a grounding - type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the grounding
- type plug.
13
Power cord protection
Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the appliance.
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
14
Outdoor Cable Grounding
Ensure the cable system is grounded as to provide some protection against voltage surges and
built-up static charges.
15
Lightning
For added protection for this equipment during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the cable system.
This will prevent damage to the video product due to lightning and power line surges.
16
Overloading
Do not overload wall outlets and extension cords as this can result in a risk of re or electrical
shock.
17
Object and liquid entry
Never push objects of any kind into this equipment through openings, as they may touch
dangerous voltage points or short -out parts that could result in a re or electrical shock. Never spill
liquid of any kind on the product.
18
Servicing
Do not attempt to service this equipment yourself, as opening or removing covers may expose you
to dangerous voltage or other hazards, return to Seaside Communications for replacement.
19
Safety check
Upon completion of any service to this digital cable box, ask the Seaside service technician to
perform safety checks to determine that the product is in proper operational condition.
20
Heat
This digital cable box should be situated away from heat sources such as radiators, heat registers,
stoves, or other products (including ampliers) that produce heat.
Disclaimer
The information in this document is carefully examined, and is believed to be entirely reliable. However, no
responsibility is assumed for inaccuracies. Furthermore, Seaside Communications reserves the right to make
changes herein to improve readability, function, or design.
Motorola Computer Software Copyrights
The Motorola product described in this manual may include copyrighted Motorola computer programs stored
in semiconductor memories or other media. Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted computer programs, including, but not limited to, the
exclusive right to copy or reproduce in any form the copyrighted computer program. Accordingly, any
copyrighted Motorola computer programs contained in the Motorola products described in this manual may
not be copied, reproduced, modied, reverse-engineered, or distributed in any manner without the express
written permission of Motorola. Furthermore, the purchase of Motorola products shall not be deemed to grant
either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or patent
applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in
the sale of a product.
MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Ofce.
All other product or service names are the property of their respective owners. © Motorola, Inc. 2010
This Class B digital apparatus meets all requirements of the Canadian Interference - Causing
Equipment Regulations. Cet appareil numérique de la classe B respects toutes les exigences du
Règlement sur le matériel brouilleur du Canada.
www.ic.gc.ca/eic/site/ic1.nsf/eng/home
www.ic.gc.ca/eic/site/ic1.nsf/fra/accueil
CANADIAN COMPLIANCE/DISCLAIMER
DCT5100 Installation Manual
Contents
Section 1
Introduction
Standard Features............................................................................................................................................................................1-2
Optional Features.............................................................................................................................................................................1-3
Using This Manual............................................................................................................................................................................1-4
Related Documentation ...................................................................................................................................................................1-4
Document Conventions...................................................................................................................................................................1-4
If You Need Help...............................................................................................................................................................................1-5
Calling for Repairs............................................................................................................................................................................1-5
Section 2
Overview
Front Panel........................................................................................................................................................................................2-1
Rear Panel.........................................................................................................................................................................................2-3
RF Bypass Switch Option................................................................................................................................................................2-4
Remote Controls...............................................................................................................................................................................2-5
Seaside Remote Control.........................................................................................................................................................2-5
Installing Batteries in the Remote Control............................................................................................................................2-7
Section 3
Installation
Installing the DCT5100.....................................................................................................................................................................3-1
Standard Cabling Diagram ..............................................................................................................................................................3-2
RF Bypass Switch Cabling Diagrams.............................................................................................................................................3-3
Audio/Video Cabling Diagrams.......................................................................................................................................................3-4
Audio-Only Receiver........................................................................................................................................................................3-8
IR Blaster Transmitter....................................................................................................................................................................3-10
Locating the IR Receiver on the VCR..................................................................................................................................3-10
Installing the IR Blaster.........................................................................................................................................................3-11
Checking the IR Blaster ........................................................................................................................................................3-11
Data Devices ...................................................................................................................................................................................3-12
Rear Panel Connections .......................................................................................................................................................3-12
ii Contents
DCT5100 Installation Manual
Boot Cycle ......................................................................................................................................................................................3-14
Boot Cycle Error Codes........................................................................................................................................................3-15
Operational Check .........................................................................................................................................................................3-17
Section 4
Diagnostics
Accessing Diagnostics....................................................................................................................................................................4-1
d01 General Status...........................................................................................................................................................................4-3
Error Codes..............................................................................................................................................................................4-4
Connected State......................................................................................................................................................................4-4
PLATFORM ID..........................................................................................................................................................................4-4
FAMILY ID ................................................................................................................................................................................4-4
MODEL ID.................................................................................................................................................................................4-4
REMOD CHANNEL ..................................................................................................................................................................4-5
SETTOP TIME..........................................................................................................................................................................4-5
d02 Purchase Status........................................................................................................................................................................4-5
Unsent Purchases...................................................................................................................................................................4-6
Unacknowledged Reports......................................................................................................................................................4-6
Last Acknowledged Purchase...............................................................................................................................................4-6
Last Purchase Reportback.....................................................................................................................................................4-6
IPPV Status..............................................................................................................................................................................4-6
d03 Out-Of-Band (OOB) Diagnostic...............................................................................................................................................4-7
OOB FREQUENCY...................................................................................................................................................................4-8
OOB CARRIER LOCK..............................................................................................................................................................4-8
OOB DATA...............................................................................................................................................................................4-9
OOB EMM DATA......................................................................................................................................................................4-9
OOB Signal-to-Noise Ratio (SNR)..........................................................................................................................................4-9
OOB Automatic Gain Control (AGC)...................................................................................................................................4-10
NETWORK PID.......................................................................................................................................................................4-10
EMM PID.................................................................................................................................................................................4-10
EMM PROVIDER ID................................................................................................................................................................4-10
d04 In-Band (IB) Diagnostic..........................................................................................................................................................4-11
MODE......................................................................................................................................................................................4-12
CARRIER LOCK.....................................................................................................................................................................4-12
DATA ......................................................................................................................................................................................4-12
Signal-to-Noise Ratio (SNR).................................................................................................................................................4-13
Automatic Gain Control (AGC) ............................................................................................................................................4-13
5 SECOND ERROR COUNTS................................................................................................................................................4-13
d05 Unit Address............................................................................................................................................................................4-14
TVPC INSTALLED..................................................................................................................................................................4-14
Contents iii
DCT5100 Installation Manual
UNIT ADDRESS......................................................................................................................................................................4-15
NETWORK ADDRESS............................................................................................................................................................4-15
OOB MULTICAST 16 ADDRESS...........................................................................................................................................4-16
MULTICAST 16 ADDRESS ....................................................................................................................................................4-16
MAC ADDRESS......................................................................................................................................................................4-16
d06 Current Channel Status..........................................................................................................................................................4-17
TYPE........................................................................................................................................................................................4-18
AUTHORIZATION Reason Code...........................................................................................................................................4-19
PICTURE CARRIER or In-Band Frequency.........................................................................................................................4-19
AUTHORIZED.........................................................................................................................................................................4-19
PURCHASABLE.....................................................................................................................................................................4-20
PREVIEW................................................................................................................................................................................4-20
MPEG VIDEO LOCK...............................................................................................................................................................4-20
MPEG AUDIO LOCK ..............................................................................................................................................................4-21
PCR LOCK..............................................................................................................................................................................4-21
d07 RF MODEM (Upstream)...........................................................................................................................................................4-22
RF Modem STATUS...............................................................................................................................................................4-23
CENTER FREQUENCY ..........................................................................................................................................................4-23
REQUESTED POWER LEVEL...............................................................................................................................................4-23
ACTUAL POWER LEVEL.......................................................................................................................................................4-23
REPORTBACK ADDRESS.....................................................................................................................................................4-23
LAST RB ATTEMPT TIME......................................................................................................................................................4-23
d08 Code Modules..........................................................................................................................................................................4-24
BOOTLOADER.......................................................................................................................................................................4-26
DIGITAL SECURE PROCESSOR ..........................................................................................................................................4-26
ANALOG SECURE PROCESSOR.........................................................................................................................................4-26
Downloadable Object Information Table.............................................................................................................................4-26
OBJECT NAME / VERSION...........................................................................................................................................4-26
STATUS..........................................................................................................................................................................4-26
SEGS / TIME ..................................................................................................................................................................4-27
d09 MEMORY CONFIGURATION...................................................................................................................................................4-27
MEMORY CONFIGURATION.................................................................................................................................................4-27
d10 Keypad - LED...........................................................................................................................................................................4-28
Front-Panel Keypad Diagnostic...........................................................................................................................................4-28
d11 INTERFACE STATUS ..............................................................................................................................................................4-29
INTERFACE STATUS.............................................................................................................................................................4-29
d12 USER SETTING STATUS ........................................................................................................................................................4-30
OUTPUT TYPE........................................................................................................................................................................4-30
CLOSED CAPTION.................................................................................................................................................................4-31
PEN SIZE........................................................................................................................................................................4-31
FONT STYLE..................................................................................................................................................................4-31
FOREGROUND COLOR................................................................................................................................................4-31
FOREGROUND OPACITY.............................................................................................................................................4-32
BACKGROUND COLOR ................................................................................................................................................4-32
iv Contents
DCT5100 Installation Manual
BACKGROUND OPACITY.............................................................................................................................................4-32
SERVICE SELECTION ..................................................................................................................................................4-33
SETTINGS......................................................................................................................................................................4-33
ASPECT RATIO Mode ........................................................................................................................................................... 4-33
d13 INTERACTIVE INFO ................................................................................................................................................................ 4-34
IP ADDRESS .......................................................................................................................................................................... 4-34
UPM ........................................................................................................................................................................................ 4-35
UPSTREAM ID........................................................................................................................................................................ 4-35
DOWNSTREAM ID ................................................................................................................................................................. 4-35
STATE..................................................................................................................................................................................... 4-35
MAC ABORT COUNTER........................................................................................................................................................ 4-36
SOCKET PORT STATE.......................................................................................................................................................... 4-36
Section 5
Troubleshooting
Appendix A
Specifications and Features
Specifications...................................................................................................................................................................................A-1
Features List.....................................................................................................................................................................................A-2
Abbreviations and Acronyms
Contents v
DCT5100 Installation Manual
Figures
Figure 1-1 DCT5100 set-top terminal.............................................................................................................................................1-2
Figure 2-1 Front panel......................................................................................................................................................................2-1
Figure 2-2 DCT5100 rear panel.......................................................................................................................................................2-3
Figure 2-3 RF Bypass switch option .............................................................................................................................................2-4
Figure 2-4 DRC 400 remote control...............................................................................................................................................2-5
Figure 3-1 Standard VCR cabling...................................................................................................................................................3-2
Figure 3-2 RF Bypass switch..........................................................................................................................................................3-3
Figure 3-3 Audio system cabling...................................................................................................................................................3-5
Figure 3-4 Video System Cabling...................................................................................................................................................3-6
Figure 3-5 HDTV Cabling ................................................................................................................................................................3-7
Figure 3-6 Audio-only receiver.......................................................................................................................................................3-8
Figure 3-7 Audio with stereo last...................................................................................................................................................3-9
Figure 3-8 IR transmitter installed in mounting bracket............................................................................................................3-10
Figure 3-9 IR Blaster installed......................................................................................................................................................3-11
Figure 3-10 Data Devices – Rear Panel.......................................................................................................................................3-12
Figure 4-1 Main menu diagnostic - LED........................................................................................................................................4-2
Figure 4-2 General status - LED.....................................................................................................................................................4-3
Figure 4-3 PURCHASE STATUS - LED..........................................................................................................................................4-5
Figure 4-4 OOB status - LED..........................................................................................................................................................4-8
Figure 4-5 IN-BAND DIAGNOSTIC - LED.....................................................................................................................................4-11
Figure 4-6 UNIT ADDRESS - LED.................................................................................................................................................4-15
Figure 4-7 CURRENT CHANNEL STATUS - LED........................................................................................................................4-18
Figure 4-8 RF upstream modem - LED........................................................................................................................................4-22
Figure 4-9 CODE MODULES - LED...............................................................................................................................................4-25
Figure 4-10 Character format display - OSD...............................................................................................................................4-28
Figure 4-11 Sample INTERACTIVE INFO LED.............................................................................................................................4-34
vi Contents
DCT5100 Installation Manual
Tables
Table 2-1 Front panel......................................................................................................................................................................2-2
Table 2-2 Rear panel.......................................................................................................................................................................2-3
Table 2-3 Remote control keys......................................................................................................................................................2-5
Table 3-1 LED displays OOB frequencies..................................................................................................................................3-14
Table 3-2 Error codes at boot cycle startup...............................................................................................................................3-15
Table 3-3 Operational check ........................................................................................................................................................3-17
Table 4-1 Main menu - OSD............................................................................................................................................................4-2
Table 4-2 GENERAL STATUS - OSD .............................................................................................................................................4-3
Table 4-3 Fatal hardware initialization errors - LED....................................................................................................................4-4
Table 4-4 PURCHASE STATUS - OSD...........................................................................................................................................4-5
Table 4-5 IPPV status indicators – OSD and LED........................................................................................................................4-6
Table 4-6 OOB status - OSD...........................................................................................................................................................4-7
Table 4-7 CARRIER LOCK indicators – OSD and LED................................................................................................................4-8
Table 4-8 DATA indicators – OSD and LED..................................................................................................................................4-9
Table 4-9 EMM DATA indicators – OSD and LED........................................................................................................................4-9
Table 4-10 SNR indicators - OSD...................................................................................................................................................4-9
Table 4-11 AGC indicators...........................................................................................................................................................4-10
Table 4-12 IN-BAND DIAGNOSTIC - OSD....................................................................................................................................4-11
Table 4-13 MODE values - OSD ...................................................................................................................................................4-12
Table 4-14 In-Band CARRIER LOCK - OSD and LED.................................................................................................................4-12
Table 4-15 In-Band DATA indicators – OSD and LED...............................................................................................................4-12
Table 4-16 In-Band SNR - OSD ....................................................................................................................................................4-13
Table 4-17 In-Band AGC values - OSD........................................................................................................................................4-13
Table 4-18 UNIT ADDRESS - OSD...............................................................................................................................................4-14
Table 4-19 MULTICAST 16 ADDRESS streams - OSD...............................................................................................................4-16
Table 4-20 Analog CURRENT CHANNEL STATUS - OSD..........................................................................................................4-17
Table 4-21 Digital CURRENT CHANNEL STATUS - OSD...........................................................................................................4-17
Table 4-22 Current channel TYPE – OSD and LED....................................................................................................................4-18
Table 4-23 Variable descriptions - OSD......................................................................................................................................4-19
Table 4-24 AUTHORIZED values..................................................................................................................................................4-19
Table 4-25 Purchase indicators – OSD and LED........................................................................................................................4-20
Table 4-26 PREVIEW mode indicators – OSD and LED............................................................................................................4-20
Table 4-27 MPEG VIDEO LOCK ...................................................................................................................................................4-20
Table 4-28 MPEG AUDIO LOCK values.......................................................................................................................................4-21
Table 4-29 PCR LOCK values ......................................................................................................................................................4-21
Table 4-30 RF upstream modem..................................................................................................................................................4-22
Table 4-31 CODE MODULES - OSD.............................................................................................................................................4-24
Contents vii
DCT5100 Installation Manual
Table 4-32 Object STATUS ...........................................................................................................................................................4-26
Table 4-33 MEMORY CONFIGURATION - OSD...........................................................................................................................4-27
Table 4-34 INTERFACE STATUS..................................................................................................................................................4-29
Table 4-35 USER SETTING STATUS – OSD................................................................................................................................4-30
Table 4-36 INTERACTIVE INFO - OSD.........................................................................................................................................4-34
DCT5100 Installation Manual
Section 1
Introduction
The Motorola DCT5100 High Definition Cable Receiver for Seaside digital cable, and high
definition (HD) programming.
The DCT5100 offers the following standard features:
• Interactive digital cable receiver - enables both standard and HDTV programming
• Integrated high definition decoder with YPbPr component video output
• Digital Visual Interface (DVI) connector
• Full feature access from front panel
• LED display with IR receiver for Seaside remote control
The following items are included with your DCT5100:
• Seaside Universal Remote control with batteries
• Coaxial cable
• Audio (Left/Right) cables
• Component (YPbPr) video cable
• DVI video cable (optional)
1-2 Introduction
DCT5100 Installation Manual
Figure 1-1 illustrates front and rear views of the DCT5100:
Figure 1-1
DCT5100 set-top terminal
Standard Features
The Motorola DCT5100 offers the following standard features:
Two tuners up to 860 MHz
ITU standard 64/256 QAM/FEC/enhanced adaptive equalizer
Clear analog channel processor with BTSC decoder
MPEG-2 high level video processor
ATSC standard Dolby
AC-3
audio processor
Triple-Tuner architecture supports simultaneous internet protocol (IP) connection while
processing video
DES based encryption/DCII access control
Out-of-band data receiver (70-130 MHz) 2.048 Mbps
80.3 M Byte total memory (field/factory upgradable)
A-V input ports
Component Output (Y – Pb – Pr)
S-Video output
S/PDIF-Dolby AC-3 output (electrical)
Introduction 1-3
DCT5100 Installation Manual
S/PDIF-Dolby AC-3 output (optical) Dolby Digital audio interface
RF and baseband (video and L/R audio) output ports
Infra-Red (IR) blaster port
Switched accessory outlet
Messaging capabilities
Digital diagnostics
32-bit graphics
Analog/digital video scaling (picture in graphics)
2-D/3-D graphics support in hardware
Macrovision copy protection
4 digit, 7 segment LED display
Full feature access from front panel
Optional Features
RF Bypass switch
IR Blaster transmitter
1-4 Introduction
DCT5100 Installation Manual
Using This Manual
This manual provides instructions to install and configure a DCT5100:
Section 1 Introduction provides a product description, a list of related documentation, the technical
helpline telephone number, and the repair/return procedure.
Section 2 Overview describes the DCT5100 terminal and provides an overview of its use. This
section also identifies the front-panel displays and switches and describes the rear-panel
features.
Section 3 Installation provides instructions on how to install the DCT5100 in a subscriber location
and perform operational tests.
Section 4 Diagnostics provides instructions on accessing and interpreting the built-in diagnostics.
Section 5 Troubleshooting provides information on common error conditions and their resolution.
Appendix A Specifications provides the technical specifications for and Features lists the features of
the DCT5100.
Abbreviations
and Acronyms
The Abbreviations and Acronyms list contains the full spelling of the short forms used in
this manual
.
Related Documentation
Separate instruction manuals are available for associated components:
Document Conventions
Before you begin working with this manual, familiarize yourself with the stylistic conventions
used in this manual:
SMALL CAPS
Denotes silk screening on the equipment, typically representing front- and rear-panel
controls, input/output (I/O) connections, and LEDs
* (asterisk)
Indicates that several versions of the same model number exist and the information applies
to all models; when the information applies to a specific model, the complete model number
is given
Italic type
Used for emphasis
Courier font
Displayed text
DRC 400 Remote Control User Guide
Introduction 1-5
DCT5100 Installation Manual
If You Need Help
If you need assistance while working with the DCT5100, contact Seaside Communications:
539-6250
DCT5100 Installation Manual
Section 2
Overview
The DCT5100 is adaptable to various software platforms. It supports existing entertainment,
analog, on-demand, and digital broadcast interactive services. The DCT5100 provides high
definition video output.
The DCT5100 includes two 6 MHz tuners with analog AMS-VSB, digital MPEG-2, it also
supports a variety of consumer electronic interfaces including S-Video, SPDIF (AC-3 Electrical
and Optical).
Front Panel
The controls on the front panel provide functional navigation of the DCT5100 if the remote
control is lost
or is temporarily out of service. Certain functions, such as those requiring a
numeric entry, are not available without a remote control. Figure 2-1 illustrates the front panel,
which contains selection and tuning buttons, various displays, the power switch, and connectors
for audio and video:
Figure 2-1
Front panel
311211101
92 3 4 5 6 7 8
2-2 Overview
DCT5100 Installation Manual
Table 2-1 describes the front-panel controls and LEDs:
Table 2-1
Front panel
KEY DESCRIPTION
1 LED Displays the channel number or time of day.
There are four indicator lights on the LED screen:
MSGS. — the DCT5100 has received messages for you to read ON — the DCT5100 is powered on
esu ni si lortnoc etomer eht ETOMER evitca si ssapyb FR eht B/A
2 CURSOR Moves the cursor around the program guide and menu screens.
3 MENU Displays the main menu.
4 POWER Turns the device on or off.
5 INFO Displays the current channel and program information.
6 A/B Use to manually enable the RF bypass function. You must have a cable-ready TV for this function to operate.
(Optional.)
7 SELECT Selects menu options, ON DEMAND, Pay-Per-View events or programs from the program guide.
8 GUIDE Displays the program guide.
9 CHANNEL + Changes the channels by moving up or down.
CHANNEL -
10 USB The Universal Serial Bus (USB) connector is used to support devices such
as keyboards, joysticks, scanners, disk storage,
PCs, printers, and digital cameras.
(Not enabled on this unit.)
11 VIDEO IN The VIDEO IN connector accepts a baseband video input from a VCR, camcorder, or other video device. (Not enabled on
this unit.)
12 AUDIO IN R These connectors are used for connecting the set-top between a CD player and a stereo tuner (or other audio peripheral).
AUDIO IN L Audio from the auxiliary device will pass through the DCT5100 when it is turned off.
(Not enabled on this unit.)
13 SMART CARD This interface is intended to support electronic commerce activity utilizing a Smart Card. (Not enabled on this unit.)
SLOT
Overview 2-3
DCT5100 Installation Manual
Rear Panel
Figure 2-2 illustrates the rear panel of the DCT5100, which contains a switched power outlet;
connectors for video, audio, and RF cabling; data output; and modem and data interface
connectors.
Figure 2-2
DCT5100 rear panel
1 2 3
8
9 10 11 12 14 15
5 74
13
6
KEY DESCRIPTION
1 TO TV/VCR This coaxial output connector is used to connect the DCT5100 to a TV or VCR operating on channel 3 or 4.
2 CABLE IN The CABLE IN connector receives the incoming signal from your cable service provider.
3 ETHERNET The Ethernet port that supports PC networking.
(Not currently enabled.)
4 AUDIO IN R These connectors are used to connect a set-top between a peripheral audio device such as a CD player and a stereo
AUDIO IN L tuner or A/V receiver. In the current DCT5100 release, the audio from the peripheral device will pass through the DCT
5100 when it is turned off.
5 SPDIF The orange coaxial SPDIF connector is a digital output connection that carries Dolby Digital 5.1 audio or PCM audio.
It is used to connect the DCT5100 to a stereo tuner or A/V receiver to provide surround-sound, theater-style audio.
6 VIDEO IN The VIDEO IN connector accepts a baseband video input from a VCR, camcorder or other video device.
(N/A)
VIDEO OUT The VIDEO OUT connector is used to deliver baseband video to an external device such as a VCR or TV.
7 Convenience This AC outlet may be used to plug your TV into the DCT5100 as a
convenient additional
outlet.
8 IR This connector enables the DCT5100 to control a VCR while recording a selected program. Not all electronic program
guides support this feature.
9 USB The Universal Serial Bus (USB) is used to support devices such as keyboards, joysticks, scanners, disk storage, PCs,
printers, and digital cameras.
(Not currently enabled.)
10 DVI Used to deliver High-Definition video to an HDTV with a DVI video input. (Not available/enabled on all units)
11 AUDIO OUT R The RCA phono-type connectors are used to deliver audio to a stereo receiver.
AUDIO OUT L
12 Y Pb Pr These connectors are used to deliver component video to an HD-ready TV or monitor. Though capable of delivering
standard definition video to your TV or monitor, these cables are necessary to deliver High Definition video.
13 TV PASS CARD For Future Use
14 S-VIDEO This connector is used to deliver high quality, standard definition video to external devices that accept S-Video inputs,
such as a high-end VCR or TV.
15 OPTICAL The OPTICAL SPDIF connector is an optical digital output connection that carries Dolby Digital 5.1 audio or PCM audio.
It is used to connect the DCT5100 to a stereo tuner or A/V receiver to
provide surround-sound,
theater style audio.
2-4 Overview
DCT5100 Installation Manual
RF Bypass Switch Option
The RF Bypass switch option supports modulated/baseband video and audio outputs for a
variety of configurations that enable you to meet the needs of individual subscribers. The RF
Bypass causes the cable signal to pass the DCT5100 and go directly to a TV or VCR. Figure 2-3
illustrates the RF Bypass switch option:
Figure 2-3
RF Bypass switch option
A
UDIO OUT
AUDIO IN
TO
TV/VCR
VIDEO
R
IN
L
OUT
S-VIDEO
OPTICAL
SPDIF
SPDIF
Y Pb
Pr
SWITCHED
105-125V
60Hz
4A MAX
500W MAX
RPT OUT
RF INRF IN
IR
DVI-D OUT
CABLE
IN
CONV
OUT
RF
OUT
CONV
IN
From cable outlet
To TV
TO
TV/VCR
CABLE
IN
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81

Motorola DCT1200 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI