TOTAL FLOW (gpm)
0 1 2 34567 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
TOTAL HEAD (ft)
0
2
4
6
8
10
12
14
16
18
Flow (m^3/h)
0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5
Head (m)
0.0
0.5
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
5.0
0015
0010
H
High - Speed 3
M
Medium - Speed 2
Low - Speed 1
L
M
H
L
H
M
L
Multi-Speed Circulators • Performance Curves
Submittal Data Information
3-Speed Cartridge Circulators
Submittal Data # 101-125
Supersedes: 06/05/14
Effective: 06/26/15
Application
The 0015 3-Speed pump is specifically designed for the wide range of flow and
head requirements of today’s hydronic heating systems. Its’ 3-Speed switching capability
provides fine tuning control to match a wide combination of tube diameters and length
of runs. The 0015 3-Speed is a direct replacement for the Grundfos UPS 15-58 3-Speed.
The 0015 delivers the highest starting torque in its class and includes a removable,
uni-body Integral Flow Check (IFC
®
) that prevents gravity flow, reduces installation
costs and improves pump performance. The Stainless Steel 0015 should be used
on open, fresh water systems and replaces Grundfos UPS 15-35FC & 15-55FC.
The 0010 3-Speed Service pump is designed as an ideal replacement circulator
for service contractors to use on any emergency “no-heat” call. The 0010 3-Speed
replaces most commonly used circulators. Simply install it and set the speed to
match the original pump performance. The handy new four bolt flange matches
up to any pump regardless of style, type or age.
Mounting Positions
Standard Optional OK if over 20 psi
Flange Orientation
Standard (S)
Rotated (R)
Universal (U)
Features
• 3-Speed Switch
• Fine tune to system requirements
• Highest performance & starting torque in class
• Heavy duty construction for longer life
• 4-bolt universal flange (0010 only)
• Removable high-flow Integral Flow Check (IFC
®
)
Prevents gravity flow
Reduces installation costs
Improves pump performance
• Replaceable cartridge design
• Quiet, efficient operation
• Self lubricating, no mechanical seal
• Wide range of applications
• Cast Iron or Stainless Steel, flanged construction
Materials of Construction
Casing: .................................................. 0015
..................................................................(Cast Iron or
..................................................................Stainless Steel)
Casing: .................................................. 0010
..................................................................(Only Cast Iron)
Integral Flow Check (IFC
®
):
Body, Plunger ...................Acetal
O-ring Seal..........................EPDM
Spring ....................................Stainless Steel
Stator Housing: ...............................Steel
Cartridge: ............................................Stainless Steel
Impeller: ..............................................Non-Metallic
Shaft: ......................................................Ceramic
Bearings: ..............................................Carbon
O-Ring & Gaskets: ..........................EPDM
Model Nomenclature
F – Cast Iron, Flanged
SF – Stainless Steel, Flanged
MS – 3-Speed Switch
IFC – Integral Flow Check
Performance Data
0015 0010
Maximum Flow (GPM): 18 31
Maximum Head (FT): 17 11
Minimum Fluid Temperature: 40˚F (4˚C)
Maximum Fluid Temperature: 230°F (110˚C)
Maximum Working Pressure: 125 psi
Connection Sizes: 3/4”, 1”, 1-1/4”, 1-1/2” Flanged
Electrical Data
Pump Dimensions & Weights
Models
Flange
Code
A B C D F G Ship Wt.
in. mm in. mm in. mm in. mm in. mm in. mm lbs. Kg
0015-MSF3- IFC S
6-1/2
165 4-5/8 118
3-3/16
81
3-7/16
78 5-3/8 137 6-3/8 162 8 3.5
0015-MSSF3- IFC* S
6-1/2
165 4-5/8 118
3-3/16
81
3-7/16
78 5-3/8 137 6-3/8 162 8 3.5
0015-MSF3-1 IFC R
6
152 4-5/8 118
3-3/16
81
3-7/16
78 5-3/8 137 6-3/8 162 8 3.5
0015-MSSF3-1 IFC* R
6
152 4-5/8 118
3-3/16
81
3-7/16
78 5-3/8 137 6-3/8 162 8 3.5
0010-MSF2-IFC U
6-11/16
170 4-3/4 120
3-3/16
81
3-7/16
78 5-3/8 137 6-3/8 162 10 4.5
Model Volts Hz Ph
Amps
RPM
(Speed 3)
HP
Speed 1 Speed 2 Speed 3
0015
115
60 1 .54 .74 .85 3250 1/20
0010
115
60 1 .57 .79 .91 3250 1/20
Motor
Type
Permanent Split Capacitor Impedance Protected
* Stainless Steel
A
B
C
G
D
F
Low-Lead Compliant
Certifications & Listings
FOR INDOOR
USE ONLY
Taco Inc., 1160 Cranston Street, Cranston, RI 02920 / (401) 942-8000 / Fax (401) 942-2360
Taco (Canada) Ltd., 8450 Lawson Road, Unit #3, Milton, Ontario L9T 0J8 / (905) 564-9422 / Fax (905) 564-9436
www.TacoComfort.com