Billion BiPAC 7300N RE Owner's manual
- Category
- Routers
- Type
- Owner's manual
This manual is also suitable for
Billion BiPAC 7300N RE is a (3G)/Wireless-N ADSL2+ Firewall Router that offers a wide range of features and possible use cases. Here is some brief product information:
- ADSL2+ support: The router supports ADSL2+ broadband connections, providing fast and reliable internet access.
- Wireless-N technology: The router uses Wireless-N technology to provide fast and stable wireless connectivity for your devices.
- Firewall protection: The router has a built-in firewall to protect your network from unauthorized access and malicious attacks.
- USB connectivity: The router has a USB port that can be used to connect a USB storage device or a 3G/HSDPA modem for internet access.
Billion BiPAC 7300N RE is a (3G)/Wireless-N ADSL2+ Firewall Router that offers a wide range of features and possible use cases. Here is some brief product information:
- ADSL2+ support: The router supports ADSL2+ broadband connections, providing fast and reliable internet access.
- Wireless-N technology: The router uses Wireless-N technology to provide fast and stable wireless connectivity for your devices.
- Firewall protection: The router has a built-in firewall to protect your network from unauthorized access and malicious attacks.
- USB connectivity: The router has a USB port that can be used to connect a USB storage device or a 3G/HSDPA modem for internet access.
Billion BiPAC 7300NX, 7300N RE (3G)/ Wireless-N ADSL2+ Firewall Router
1
Package Contents
BiPAC 7300NX, 7300N RE (3G) / Wireless-N ADSL2+ Firewall Router
CD containing the on-line manual and QSG
RJ-11 ADSL/ telephone cable
Ethernet (RJ-45) cable
Two 2dBi detachable antennas
Power adapter
Quick Start Guide
Splitter/ Micro-filter (Optional)
A
A
t
t
t
t
e
e
n
n
t
t
i
i
o
o
n
n
Warning
PLEASE READ THE QUICK START GUIDE AND FOLLOW THE
STEPS CAREFULLY. THIS QUICK START GUIDE WILL HELP YOU
INSTALL THE DEVICE PROPERLY AND AVOID IMPROPER USAGE.
IF YOU NEED MORE INFORMATION ON THIS SOFTWARE
CONFIGURATION, PLEASE REFER TO THE USER MANUAL ON
CD-ROM.
Do not use the
router
in high humidity or high temperatures.
Do not use the same power source for the router as other
equipment.
Do not open or repair the case yourself. If the router is too hot,
turn off the power immediately and have it repaired at a qualified
service center.
Avoid using this
product
and all
accessories
outdoors.
Place the router on a stable surface.
Only use the power adapter that comes with the package. Using a
different voltage rating power adaptor may damage the router.
Downloaded from www.Manualslib.com manuals search engine
Quick Start Guide
2
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
O
O
v
v
e
e
r
r
v
v
i
i
e
e
w
w
The Front LEDs
The Rear Ports
* Note 1. For advanced reset and restore setting, please refer to user manual.
.2. For WPS configuration, please refer to the WPS section of user manual.
Connect
with
the
supplied power
adapter.
Connect the supplied
RJ-11 cable to this
port when connecting
to the ADSL/
telephone network.
(1)
W
W
P
P
S
S
:
Press
2
-
6
seconds
until WPS LED
flashes green to trigger WPS function.
*2
(2)
W
W
i
i
r
r
e
e
l
l
e
e
s
s
s
s
O
O
N
N
/
/
O
O
F
F
F
F
S
S
w
w
i
i
t
t
c
c
h
h: Press over 6
seconds after WPS LED is off to switch on
wireless function. Press over 6 seconds
again for disable wireless function.
Flash green when
WPS configuration
is in progress.
Lit red when WAN port
fails to get IP address.
Lit green when WAN
port gets IP address
successfully.
Connect your
computer to a
LAN port with
the included
Ethernet cable.
Power
ON/OFF
switch
Blink green when power is
on and system is booting.
Lit green when the system
is ready. Lit Red if the
system is dead.
Lit green when a wireless
connection is established.
Blink when data is being
sent / received.
Lit
g
reen when the
device
is successfully connected
to an ADSL DSLAM. (“Line
sync”).
When the device
power is on, press
to reset or to
restore its factory
default setting.
*1
Antenna
(
(
B
B
i
i
P
P
A
A
C
C
7
7
3
3
0
0
0
0
N
N
X
X
O
O
n
n
l
l
y
y
)
)
Lit when the router is
connected to a USB
device.
(
(
B
B
i
i
P
P
A
A
C
C
7
7
3
3
0
0
0
0
N
N
X
X
O
O
n
n
l
l
y
y
)
)
Connect the USB
cable to this port.
(
(
B
B
i
i
P
P
A
A
C
C
7
7
3
3
0
0
0
0
N
N
R
R
E
E
O
O
n
n
l
l
y
y
)
)
E
E
W
W
A
A
N
N
:
:
I
I
t
t
o
o
f
f
f
f
e
e
r
r
s
s
i
i
t
t
s
s
E
E
t
t
h
h
e
e
r
r
n
n
e
e
t
t
p
p
o
o
r
r
t
t
#
#
1
1
a
a
s
s
a
a
W
W
A
A
N
N
p
p
o
o
r
r
t
t for
connecting to Cable Modem,
VDSL, fiber modem or PON
optic lines with RJ-45 cable.
Lit when connected to an
Ethernet device. Lit green when
the speed of transmission hits
10/100Mbps; Blink when data is
being Transmitted / Received.
Downloaded from www.Manualslib.com manuals search engine
Quick Start Guide
4
H
H
a
a
r
r
d
d
w
w
a
a
r
r
e
e
I
I
n
n
s
s
t
t
a
a
l
l
l
l
a
a
t
t
i
i
o
o
n
n
1. Power Connection
Plug the supplied power adapter to the wall jack and the other side to the router.
Please note that the plug type may differ according to country.
2. LAN Connection
Connect the supplied RJ-45 Ethernet cable to one of the Ethernet ports, and the other
side to the PC’s Ethernet interface.
3. ADSL Connection
Connect the supplied RJ-11 phone cable to the router’s ADSL port, and the other side
to the phone jack on the wall.
4. EWAN Connection (BiPAC 7300N RE only)
Connect RJ-45 Ethernet cable to the Ethernet port # 1 (EWAN), and connect the
other side to another alternative broadband device, such as Cable Modem, VDSL,
Fiber Modem or PON optic lines. Please refer to User Manual for detail instruction.
Downloaded from www.Manualslib.com manuals search engine
Billion BiPAC 7300NX, 7300N RE (3G)/ Wireless-N ADSL2+ Firewall Router
5
5. USB Connection (BiPAC 7300NX only)
The USB 2.0 port supports 3G/ HSDPA modem connectivity: users can
conveniently access Internet via 3G, eliminating the limitations of the wired
network. This solution also employs an auto fail-over feature to ensure
always-on connectivity for SOHO users. (Note: For compatible 3G USB
modems, please refer to http://www.billion.com/compatible-3G.html for
updated list.)
6. USB Storage (BiPAC 7300NX only)
Storage feature through USB 2.0 port: FTP server, samba server
7. Splitter/ Micro-filter Connection
Splitter / Micro-filter are important for ADSL installation. High-frequency signals are
directed to the ADSL modem, and low-frequency signals are directed to the
telephone or other analog voice-channel device to prevent inter-modulation
distortion and also to get good speed and stable ADSL sync rate.
a) Splitter connection
If the installation has only a single telephone and a single ADSL modem, then a
splitter can be employed.
Downloaded from www.Manualslib.com manuals search engine
Quick Start Guide
6
b) Micro-filter connection
If the installation has several telephones or other analog devices, then an internal
micro-filter can be employed at each analog device.
E
E
a
a
s
s
y
y
S
S
i
i
g
g
n
n
-
-
O
O
n
n
Make sure power on the device, Ethernet cable is connected to your PC and ADSL line is in
sync. Then open up a web browser and you will automatically be directed to the step-by-step
easy sign on configuration wizard which will guide you to complete the basic network
configuration to connect to the internet.
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
n
n
g
g
t
t
o
o
t
t
h
h
e
e
R
R
o
o
u
u
t
t
e
e
r
r
1. Open the web browser and type
h
h
t
t
t
t
p
p
:
:
/
/
/
/
1
1
9
9
2
2
.
.
1
1
6
6
8
8
.
.
1
1
.
.
2
2
5
5
4
4 in the browser's address box. This
number is the default IP address for this router. Press Enter.
2. A username and password window will appear. The default
u
u
s
s
e
e
r
r
n
n
a
a
m
m
e
e
i
i
s
s
“
“
a
a
d
d
m
m
i
i
n
n
”
”,
p
p
a
a
s
s
s
s
w
w
o
o
r
r
d
d
i
i
s
s
“
“
a
a
d
d
m
m
i
i
n
n
”
”. Press OK to proceed.
3. You will get a status report web page and main menu screen.
Please see the relevant sections of user manual for detailed instructions on how to
configure your router.
T
T
r
r
o
o
u
u
b
b
l
l
e
e
s
s
h
h
o
o
o
o
t
t
i
i
n
n
g
g
1. None of the LEDs are on when you turn on the router.
Check the connection between the adapter and the router. If the error persists, you may have
a hardware problem. In this case you should contact technical support.
2. Can’t ping any PCs on the LAN.
Check the Ethernet LEDs on the front panel. The LED should be on for a port that has a PC
connected. If it is off, check the cables between your router and the PC. Make sure you have
uninstalled any software firewall for troubleshooting. Verify that the IP address and the subnet
mask are consistent between the router and the workstations.
3. Frequent loss of ADSL line sync (disconnections).
Ensure that all other devices connected to the same telephone line as your router (e.g.
telephones, fax machines, analogue modems) have a line filter connected between them and
the wall socket (unless you are using a Central Splitter or Central Filter installed by a qualified
and licensed electrician), and ensure that all line filters are correctly installed and the right
way around. Missing line filters or line filters installed the wrong way around can cause
problems with your ADSL connection, including causing frequent disconnections. If you have
a back-to-base alarm system you should contact your security provider for a technician to
make any necessary changes.
Downloaded from www.Manualslib.com manuals search engine
Billion BiPAC 7300NX, 7300N RE (3G)/ Wireless-N ADSL2+ Firewall Router
7
P
P
r
r
o
o
d
d
u
u
c
c
t
t
S
S
u
u
p
p
p
p
o
o
r
r
t
t
a
a
n
n
d
d
C
C
o
o
n
n
t
t
a
a
c
c
t
t
I
I
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
Most problems can be solved by referring to the Troubleshooting section in the User Manual. If
you cannot resolve the problem with the Troubleshooting chapter, please contact the dealer
where you purchased this product.
C
C
o
o
n
n
t
t
a
a
c
c
t
t
B
B
i
i
l
l
l
l
i
i
o
o
n
n
WORLDWIDE
http://www.billion.com
BiPAC
7300NX, 7300N
RE
Series
: V1.0
1
EN
(AAMPIMBIL7300NXXX1)
Downloaded from www.Manualslib.com manuals search engine
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
Billion BiPAC 7300N RE Owner's manual
- Category
- Routers
- Type
- Owner's manual
- This manual is also suitable for
Billion BiPAC 7300N RE is a (3G)/Wireless-N ADSL2+ Firewall Router that offers a wide range of features and possible use cases. Here is some brief product information:
- ADSL2+ support: The router supports ADSL2+ broadband connections, providing fast and reliable internet access.
- Wireless-N technology: The router uses Wireless-N technology to provide fast and stable wireless connectivity for your devices.
- Firewall protection: The router has a built-in firewall to protect your network from unauthorized access and malicious attacks.
- USB connectivity: The router has a USB port that can be used to connect a USB storage device or a 3G/HSDPA modem for internet access.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Billion BiPAC 5200 RC Quick start guide
-
Billion Electric Company BiPAC 7402(G)X(L) Series User manual
-
-
Billion BiPAC 7300N User manual
-
Billion BiPAC 5210S User manual
-
-
Billion BiPAC 7404VGOX User manual
-
-
Billion Electric Company BiPAC 7100 User manual
-
Other documents
-
-
-
Ozenda AR4505GW User manual
-
Telewell TW-EA510v3 (c) 3G Quick start guide
-
-
3com WL-603 User manual
-
-
-
TP-LINK TD-W8961NB User manual
-
Spark HG659B User manual
