2. American Standard
  3. Town Square Countertop Sink 0700.008

American Standard Town Square Countertop Sink 0700.008 User manual

  • Hello! I am an AI chatbot trained to assist you with the American Standard Town Square Countertop Sink 0700.008 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
J27
BARRIER FREE
© 2008 AS America Inc.
TOWN SQUARE
®
COUNTERTOP SINK
FIRECLAY
TOWN SQUARE
®
COUNTERTOP SINK
• American classic design
• Clean, straight lines with classic ogee curves
• Tapered interior bowl with at bottom design
provides dramatic look
• Made from ne reclay
• Self-rimming with cutout template supplied
• Front overow
❏ 0700.004 Faucet holes on 4" (203mm) centers
(illustrated)
❏ 0700.008 Faucet holes on 8" (102mm) centers
❏ 0700.001 Center hole only
Nominal Dimensions:
23-1/8" x 18-3/4"
(587 x 476mm)
Bowl sizes:
18-1/2" (470mm) wide
10-1/2" (267mm) front to back
6-1/4" (159mm) deep
Compliance Certications -
Meets or Exceeds the Following Specications:
• ASME A112.19.9M for Non-Vitreous
Ceramic Fixtures
• CAN/CSA B45 series
To Be Specied:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Black
❏ Town Square Faucet:
❏ Centerset Sink Faucet: 2555.201 (shown)
❏ Widespread Sink Faucet: 2555.801
❏ Other Sink Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP
ARE SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of xtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.9M.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
Revised 2/08
4"
(102mm)
9-3/4"
(248mm)
18-3/4"
(476mm)
23-1/8"
(587mm)
FINISHED WALL
OR SPLASHBACK
8"
(203mm)
31"
(787mm)
SUGGESTED
1-1/4" O.D. TAILPIECE
1-1/4" O.D. WASTE
FINISHED FLOOR
*
10-3/4"
(273mm)
*
12-7/8"
(327mm)
COUNTERTOP
(BY OTHERS)
SEALING
COMPOUND
1"
(25mm)
8-1/8"
(206mm)
OPTIONAL
SUPPLIES
AS REQ'D
1-3/4" DIA.
STD. DRAIN
OUTLET
2-7/8"
(73mm)
/