Pioneer XW-SMA3 User manual

Brand: Pioneer

Model: XW-SMA3

Type: User manual

Pioneer XW-SMA3: A Versatile Wireless Speaker System for Every Occasion

Experience superior audio quality with the Pioneer XW-SMA3 wireless speaker, designed to deliver rich, crystal-clear sound for all your listening needs. Equipped with Bluetooth connectivity, this speaker allows you to stream music wirelessly from your smartphone, tablet, or any Bluetooth-enabled device. Enjoy the freedom to place the speaker anywhere in your home without the hassle of wires.

Pioneer XW-SMA3: A Versatile Wireless Speaker System for Every Occasion

Please assist with battery recycling

This product is equipped with a built-in recyclable

lithium battery. When discarding this product, please

following the instructions noted below to remove the

lithium-ion battery.

DANGER

[Built-in rechargeable lithium-ion battery]

Please follow the instructions noted. Failure to

do so may cause the built-in lithium-ion battery

to leak, overheat, ignite, or rupture.

・

Do not dispose of the device in re or expose it to

heat.

・

Do not attempt to disassemble the battery or alter it in

any way.

・

Do not throw the device, strike it with a hammer or

other object, or drive nails into it.

・

Do not use or leave the device in places where it will

be exposed to high temperatures, such as near a

stove or inside a closed automobile.

・

In the event that the built-in lithium-ion battery leaks

uid and the uid contacts your eyes, do not rub them,

but rinse with copious amounts of clean water and

seek immediate medical treatment. Your eyes may be

seriously harmed by exposure to such battery uid.

・

Do not allow the battery to be immersed in fresh or

sea water, or become otherwise wet.

・

Do not attempt to connect the device directly to an AC

electrical outlet, or the cigar lighter of an automobile.

・

Do not attempt to use the device’s lithium-ion battery

to power any other device.

・

Do not handle a lithium-ion battery that is leaking. If

leaking battery uid contacts your skin, wash quickly

with copious amounts of water.

WARNING

[Built-in rechargeable lithium-ion battery]

・

Do not place the device in a microwave oven or

expose it to high pressure, since the device may

overheat, rupture, or ignite.

・

Do not place a leaking rechargeable lithium-ion battery

near a source of heat or re, since the battery could

overheat, rupture, or ignite.

CAUTION

[Built-in rechargeable lithium-ion battery]

・

Do not dispose of the device in re or water, since the

rechargeable lithium-ion battery could rupture or leak

battery uid, resulting in re or personal injury.

・

To prevent accidents, store the lithium-ion battery out

of the reach of young children. In the event the battery

is swallowed, seek medical attention immediately.

・

If uid leaking from a rechargeable lithium-ion battery

contacts your skin or clothes, wash immediately with

copious amounts of clean water. If left unattended, a

skin rash could result.

Removing the battery

Preparation

This procedure requires the tools listed below.

Be sure to assemble the necessary items before

beginning.

・

Ordinary at-head (−) screwdriver

・

Ordinary Phillips(+) screwdriver

・

Precision (glasses) Phillips (+) screwdriver

・

Wire cutters (or scissors)

CAUTION

・

The instructions provided here to “assist with battery

recycling” are meant to allow the device’s built-in

rechargeable lithium-ion battery to be removed at the

end of the device’s service life, before nal device

disposal. The device’s warranty is invalidated the

moment the device is opened.

・

In order to avoid short circuits, remove the battery only

after conrming that the battery’s storage capacity has

been fully depleted. Even when the power no longer

turns on, some residual current remains in the battery.

It is recommended to remove the lithium-ion battery

only after leaving the device with the power turned

on for several days, to assure that the battery is fully

depleted.

WARNING

・

Disconnect the AC adapter before performing these

procedures.

・

Do not contact the touch sensor while performing

these procedures.

・

In the event that the power is turned on while

performing these procedures, turn off the power and

then begin the procedures again.

ENGLISH

Removing the built-in battery (XW-SMA3 only)

1 Insert the ordinary at-head (−) screwdriver into

the gap between the speaker grille and grille

frame, and press the grille outward to release it.

The speaker grille is press-tted into the grille frame.

Take care not to injure yourself with the tip of the

screwdriver.

input

network

input

volume

standby/on

Ordinary flat-head (–)

screwdriver

Speaker grill

2 Remove the speaker grill.

input

network

input

volume

standby/on

Speaker grill

3 Remove the 4 screws on the bottom of the unit.

Screws

4 Remove the grille frame.

The grille frame is xed rmly in position. Remove the

13 screws (a) holding the frame, then insert your nger

in the duct (b) and pull out rmly.

input

network

input

volume

standby/on

(a)

(b)

5 Remove the connectors.

First remove the 1 connector (a) on the upper inside

surface of the unit. Next, remove the 3 connectors (b)

on the unit’s lower inside surface.

(a)

(b)

6 Remove the MAIN ASSY.

Remove the 9 MAIN ASSY screws, then use the wire

cutters to cut the antenna wire.

Wire cutters

Screws

MAIN ASSY

7 Remove the 4 screws around the battery case

to remove the battery and battery case.

Battery

Battery case

TIPS

・

When removing the lithium-ion battery, do not pull on

the device’s connectors or wires.

・

Insert the tip of the ordinary at-head (−) screwdriver

between the battery and case, and pry out the battery.

Be careful not to scar the battery with the tip of the

screwdriver.

8 Use a piece of adhesive tape to tape the battery

connector to the side of the battery.

Electrical tape

TIPS

・

To avoid short circuit accidents, cover the entire

connector with adhesive tape and fasten it to the

battery’s body.

CAUTION

・

Follow the precautions noted below when placing the

depleted lithium-ion battery into the recycling container

of a participating dealer.



- Do not remove any of the battery’s vinyl plastic

covering.



- Do not cut the battery’s wire or connector.



- Do not attempt to disassemble the battery.



- If the battery’s metallic terminal becomes exposed,

cover it entirely in electrical insulating tape.

・

When disposing of the other parts of the device, follow

all local community rules and ordinances regarding

disposal.

ARH7151-A

Pioneer XW-SMA3 User manual

Brand: Pioneer

Model: XW-SMA3

Type: User manual

Pioneer XW-SMA3: A Versatile Wireless Speaker System for Every Occasion

Download PDF

report

Pioneer XW-SMA3 User manual

Pioneer XW-SMA3 User manual

Related papers

Other documents