La Crosse Technology wireless weather station User manual

LA CROSSE TECHNOLOGY QUICK SET-UP INSTRUCTIONS

Please make sure that fresh batteries are installed properly in the receiver and the sensor.

IMPORTANT!! Do not set the time or press any other buttons

until the display has communicated with

the outdoor sensor for at least 10 minutes.

Use the “SET” button toggle through the menu options.

Use the “INDOOR” button to change the menu options when they are flashing.

1. Press and hold the SET button until 12h is flashing. Use the INDOOR button to select either 12h

or 24h time. Press and release the SET button once.

2. The TIME is flashing. Use the INDOOR button to adjust the hours and the OUTDOOR button to

adjust the minutes. Press and release the SET button once.

3. ** NOTE: There is only a PM display on this unit which displays under the time. If there is no

PM display, the hours are set to AM**

4. The Fahrenheit is flashing. Use the INDOOR button to select either Fahrenheit or Celsius. Press

the SET button twice to exit the set-up.

This manual is also suitable for

Download PDF