In-Sink-Erator H778 Datasheet

In-Sink-Erator
Brand
In-Sink-Erator
Model
H778
Type
Datasheet

In-Sink-Erator H778 is a hot water dispenser designed for heavy-duty use, providing up to 100 cups of near-boiling water per hour. It features a traditional twist-handle operation, a chrome-plated faucet, and a 2/3-gallon stainless steel tank for durability. The easy-to-adjust temperature control allows you to set the desired water temperature, and it can be mounted in a standard sink opening or a 1¼" drilled hole for easy installation.

In-Sink-Erator H778 is a hot water dispenser designed for heavy-duty use, providing up to 100 cups of near-boiling water per hour. It features a traditional twist-handle operation, a chrome-plated faucet, and a 2/3-gallon stainless steel tank for durability. The easy-to-adjust temperature control allows you to set the desired water temperature, and it can be mounted in a standard sink opening or a 1¼" drilled hole for easy installation.

PROJECT: ITEM NO.:
MODEL H778
Hot Water Dispenser
APPLICATION: Designed for large volume usage of
steaming hot water. Up to 100 cups of 200˚ hot water per
hour are provided by the system’s
2
/
3
gallon tank. Saves
time, work and water — you only heat the water you use.
FEATURES
• Foodservice grade heating element provides 100 cups
of near-boiling water per hour
• Traditional twist-handle operation
• Chrome-plated faucet completely insulated from 200°F water
• Elevated spout provides access for large vessels
•
2
/
3
gallon Stainless Steel Tank construction for longer life
• Easy-to-adjust temperature control
• Mounts in standard sink opening or 1¼" drilled hole
• Tool-free tank connections and dry start protection
for easy installation
• 1-year full warranty on parts and labor
SPECIFICATIONS
© InSinkErator 2006 Printed in USA Form No. F185-06E-19-02
InSinkErator is a division of Emerson Electric Co.
4700 21st STREET
RACINE, WI 53406
TEL: 800-845-8345
F AX: 262-554-3620
www.insinkerator.com
The Emerson logo is
a trademark and a
service mark of
Emerson
Electric Co.
INLET
TUBE
6.125"
FLEXIBLE
VENT
TUBE
DRAIN PLUG
FLEXIBLE
OUTLET TUBE
2/3 GALLON
TANK (2.5 LITERS)
ADJUSTABLE
THERMOSTA
T
1/4" INCOMING
WATER SUPPLY
4"
4-3/8"
4-1/2"
6-3/8"
DISPENSER
HEAD
ASSEMBLY
11
"
16" MAX
Capacity
2
/3 gallon tank dispenses 100 cups
of 200ºF water per hour
Electrical
120 volts A.C., 1300 watts, 10.8 amp
heating element with 36" cord and
grounded plug
Thermostat
Snap action, adjustable from 160°F
to 210ºF (factory pre-set at
approximately 200°F)
Insulation
Meets U.L. 94HF-1
flammability specification
Valve
Instant, self-closing
Recommended
Supply Pressur
e 30-125 psi
Shipping Weigh
t Approximately 9.5 lbs.
To ensure optimum performance, maximum distance
between tank and dispenser head should be 16" or less
UNIT DEPTH
6.75" MAX
Our products appear on The KCL CADalog
CD-ROM based CAD Foodservice Symbol
Library. More information is available from
Kochman Consultants, Ltd. at www.kclcad.com.
  • Page 1 1

In-Sink-Erator H778 Datasheet

In-Sink-Erator
Brand
In-Sink-Erator
Model
H778
Type
Datasheet

In-Sink-Erator H778 is a hot water dispenser designed for heavy-duty use, providing up to 100 cups of near-boiling water per hour. It features a traditional twist-handle operation, a chrome-plated faucet, and a 2/3-gallon stainless steel tank for durability. The easy-to-adjust temperature control allows you to set the desired water temperature, and it can be mounted in a standard sink opening or a 1¼" drilled hole for easy installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents