Gibraltar Building Products RC-2GM Operating instructions

Brand: Gibraltar Building Products

Model: RC-2GM

Type: Operating instructions

This manual is also suitable for

RC-2FG

GALVALUME RIDGE CAP #RC-2GM

Ridge Cap Ridge flashing for metal roofing and shingle roofs hips & ridges

Material: Ridge Caps are made from Galvalume coated steel for added corrosion protection.

Manufactured to last the life of the structure.

Installation: The Gibraltar ridge cap is placed on top of pre-glued closure strips (outside). A

strip of butyl tape is applied to the closure strip to improve weather tightness. The ridge cap is

fastened by # 9 x 1 ½" metal roofing screws, in an opposing manor, directly across from each

other into the high rib of the panel approx. 6" O.C.

10' lengths. 10 per bundle.

The ridge cap provides a crisp, classic look and a reliable reputation for shedding rain water.

INSTALLATION GUIDELINES

These installation guidelines are for use with typical or standard applications. Refer to SM-Rib installation guide for panel and flashing install details. It is

always recommended to seek advice from a licensed professional, and to check with your local building inspector or building permit office for approvals and

possible variations that may apply.

CAUTION!

Working above grade is inherently dangerous, be sure that proper fall protection measures are in place.

When working with power tools and sheet metal, gloves and eye protection are absolutely required.

4 ⁄ in.

10.48 cm

Varies

Slope 3/12 or greater

1 ⁄ in.

3.49 cm

⁄ in.

2.22 cm