Whalen BEH2DF User manual

Brand: Whalen

Model: BEH2DF

Type: User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.

PLEASE READ AND KEEP FOR FUTURE REFERENCE.

Whalen Furniture Mfg., Inc. Page 1 Factory # 16452

Belhaven 2-Drawer File

Model # BEH2DF

ADULT ASSEMBLY REQUIRED

If you have any questions regarding assembly or if parts are missing, DO NOT return this item to

the store where it was purchased. Please call our customer service number and have your

instructions and parts list ready to provide the model name, part name or factory number:

1-866-942-5362

Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday

Or visit our web site 24 hours a day, 7 days a week for product assistance at

www.whalenstyle.com

Or e-mail your request to [email protected]

LOT NUMBER:

DATE PURCHASED:

/ /

Model # BEH2DF

Please call for replacement parts or assistance:

1-866-942-5362

Whalen Furniture Mfg., Inc. Page 2 Factory # 16452

MANUFACTURER: Whalen Furniture

CATALOG: Belhaven 2-Drawer File (BEH2DF)

DATE OF MANUFACTURE: August 2012

MADE IN CHINA

QUALITY GUARANTEE

We are confident that you will be delighted with your Whalen Furniture purchase.

Should this product be defective in workmanship or materials or fail under normal use, we will

repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is

designed to meet your highest expectations. We guarantee that you will immediately see the value of

our fine furniture.

This warranty gives you specific legal rights and you may also have other rights which vary from

State to State.

Customer Service: 1-866-942-5362

8:30 a.m. - 4:30 p.m., PST, Monday to Friday

www.whalenstyle.com

THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE

MAXIMUM WEIGHTS INDICATED. USE WITH LOADS HEAVIER THAN THE

MAXIMUM WEIGHTS INDICATED MAY RESULT IN INSTABILITY CAUSING

POSSIBLE INJURY.

MAXIMUM LOAD 100 lb. (45.3 kg)

MAXIMUM RECOMMENDED WEIGHT LOADS

MAXIMUM LOAD 30 lb. (13.6 kg)

Model # BEH2DF

Please call for replacement parts or assistance:

1-866-942-5362

Whalen Furniture Mfg., Inc. Page 3 Factory # 16452

FURNITURE TIPPING RESTRAINT

YOUNG CHILDREN MAY BE INJURED BY TIPPING FURNITURE AND YOU MUST

USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE WALL, TO

PREVENT ACCIDENTS AND/OR INJURIES.

THIS HARDWARE, MUST BE PROPERLY INSTALLED (FOLLOW ALL DIRECTIONS

IN ORDER ON THE PLASTIC BAG), TO PROVIDE PROTECTION AGAINST THE

UNEXPECTED TIPPING OF FURNITURE DUE TO IMPROPER USE.

THIS PRODUCT IS ONLY A DETERRENT. IT IS NOT A SUBSTITUTE FOR PROPER

ADULT SUPERVISION. USE OF TIP-OVER RESTRAINTS MAY ONLY REDUCE, BUT

NOT ELIMINATE, THE RISK OF TIP-OVER.

Care and Maintenance

z Use a soft, clean cloth that will not scratch the surface when dusting.

z Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous

area.

z Using solvents of any kind on your furniture may damage your furniture’s finish.

z Never use water to clean your furniture as it may cause damage to the finish.

z Always use coasters under beverage glasses and flowerpots.

z Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid

rubbing.

z Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may

create spotting within the furniture finish.

z Stains or marks from crayons or ink markers will be difficult to remove.

z In the event that your furniture is stained or otherwise damaged during use, we recommend that you call

a professional to repair your furniture.

Further advice about wood furniture care

It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity

changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from

direct sunlight as sun may damage the finish.

Proper care and cleaning at home will extend the life of your purchase. Following these important and

helpful tips will enhance your furniture as it ages.

We hope you enjoy your purchase for many years.

Model # BEH2DF

Please call for replacement parts or assistance:

1-866-942-5362

Whalen Furniture Mfg., Inc. Page 4 Factory # 16452

Parts and Hardware List

Please read completely through the instructions and verify that all parts listed are present before

beginning assembly.

A- FILE CABINET (1)

(1) - PLASTIC ANCHOR (1) (2) - BRACKET (2)

(3) - LONG SCREW (1) (4) - SHORT SCREW (1)

(5) - NYLON RESTRAINT (1) TOUCH-UP PEN (1)

A Touch-up Pen has been provided to repair any small nicks or scratches that may occur during

assembly or shipping.

Model # BEH2DF

Please call for replacement parts or assistance:

1-866-942-5362

Whalen Furniture Mfg., Inc. Page 5 Factory # 16452

DRAWER INSTALLATION

If you need to remove the file drawer or keyboard tray with ball bearing slides from the unit,

please follow the steps below to prevent any damage to the slides or the drawers.

1. If you need to remove the drawer, please pull the drawer all the way out, then simultaneously push

the plastic release lever of the ball bearing slide up on one side and down on the other side, and pull

the drawer completely out. See detail #A.

2. To place the drawer back, simply push the ball bearing cart all the way to the end of the slides (on

both sides), and align the slide runners on the drawer with the slide tracks on the unit. Push it

carefully inside until it stops. See detail #B.

NOTE:

If the drawer does not go in smoothly, please take it out and repeat the step.

Model # BEH2DF

Please call for replacement parts or assistance:

1-866-942-5362

Whalen Furniture Mfg., Inc. Page 6 Factory # 16452

Assembly Instructions

Tools required: Phillips Screwdriver, Mallet, Power Drill, and 3/8” Drill Bit

1. Unpack the unit and confirm you have all the hardware and parts required.

NOTE: Must install the wall mounting hardware with the products in use.

2. Position the FILE CABINET (A) close to the wall on your desired location.

3. In case of uneven floor, FLOOR LEVELERS are provided at the bottom of the CABINET. Adjust

the FLOOR LEVELERS by hand to correct tilting, until the unit is level.

4. Attach one of the MOUNTING BRACKETS (2) securely to the back edge of the furniture with the

SHORT SCREW (4).

5. Determine where the furniture is to be placed and mark location on the wall for the MOUNTING

BRACKET screw hole approximately 2” below the BRACKET (2) mounted to the edge of the

furniture.

6. Drill a 3/8” hole in the wall. Press the PLASTIC ANCHOR (1) into the hole and gently tap until the

flange of the anchor is against the wall surface.

7. Position the BRACKET (2) over the PLASTIC ANCHOR (1) and use the LONG SCREW (3) to

securely attach the BRACKET to the wall.

8. Place the furniture so the BRACKET in the back edge is in line with the BRACKET in the wall.

9. Lace an end of the NYLON RESTRAINT (5) strap down through each BRACKET. Bring both ends

together and slice the beaded end of the strap through the keyhole shaped slot on the other end until

snug. Pull down on the beaded end until it snaps lock into the keyhole slot.

10. To double lock return the beaded end back through the keyhole as shown.

11. Check to make sure the strap is securely laced and locked to the BRACKETS.

Your assembly should now be complete.

Thank you for your purchase!

IF YOU NEED TO ORDER ANY PARTS PLEASE USE THE LIST BELOW

Belhaven 2-Drawer File (BEH2DF)

*BEH2DF-1-TD Top Drawer

*BEH2DF-2-BD Bottom Drawer

*BEH2DF-3-LK Lock & Keys

*BEH2DF-4-HB Handle w/Bolt

*BEH2DF-5-FH File Hanger

*BEH2DF-6-DS Drawer Slides

*BEH2DF-7-TRHK Tipping Restraint Hardware Kit

*BEH2DF-8-TUP Touch-up Pen

*BEH2DF-9-FL Floor Leveler

Whalen BEH2DF User manual

Brand: Whalen

Model: BEH2DF

Type: User manual

Download PDF

report

Whalen BEH2DF User manual

Whalen BEH2DF User manual

Related papers

Other documents