Siemens S2424L1125 Installation guide

Type
Installation guide

Siemens S2424L1125 is a load center with a maximum short circuit current rating of 100,000 amps RMS symmetrical. It can be used as service equipment and is suitable for use with copper or aluminum wire. The load center has a variety of features, including:

  • Invertible for bottom feed applications
  • Back-fed breaker requires hold-down kit ECMBR2
  • Suitable for use as service equipment when main breaker is installed
  • Unused neutral bar terminals may be used to terminate equipment grounding wires

Siemens S2424L1125 is a load center with a maximum short circuit current rating of 100,000 amps RMS symmetrical. It can be used as service equipment and is suitable for use with copper or aluminum wire. The load center has a variety of features, including:

  • Invertible for bottom feed applications
  • Back-fed breaker requires hold-down kit ECMBR2
  • Suitable for use as service equipment when main breaker is installed
  • Unused neutral bar terminals may be used to terminate equipment grounding wires
  • Page 1 1

Siemens S2424L1125 Installation guide

Type
Installation guide

Siemens S2424L1125 is a load center with a maximum short circuit current rating of 100,000 amps RMS symmetrical. It can be used as service equipment and is suitable for use with copper or aluminum wire. The load center has a variety of features, including:

  • Invertible for bottom feed applications
  • Back-fed breaker requires hold-down kit ECMBR2
  • Suitable for use as service equipment when main breaker is installed
  • Unused neutral bar terminals may be used to terminate equipment grounding wires

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI