Siemens S2024L1125 is a type of electrical panel referred to as a load center. Its primary function is to safely distribute electricity throughout a building or structure. This particular model has a maximum short circuit current rating of 100,000 amps RMS symmetrical at 120/240V~. The actual rating, however, depends on the branch breakers installed in the panel and the main/feeder breaker, if any, installed ahead of it. The Siemens S2024L1125 is suitable for use as service equipment when a main breaker is installed. When utilized in this manner, it is recommended to apply a "Service Disconnect" label to the front, adjacent to the main breaker handle. Unused neutral bar terminals can be utilized to terminate equipment grounding wires in the combinations indicated for equipment ground bar terminals.