Aim to Wash! 90-7775 Installation guide

Brand
Aim to Wash!
Model
90-7775
Type
Installation guide

This manual is also suitable for

CAUTION
When installing this unit be sure that the water supply
valve by your toilet is fully turned off and that there is
no flow/leak of water before removing any plumbing
components from your toilet. Failure to do so could
result in flooding and water damage.
Do not over-ghten plumbing connections.
Use all supplied O-rings to prevent leaks.
NOTE: THE T-VALVE MUST BE SHUT OFF AFTER
EACH USE.
Failure to turn off aer each use may cause
flooding and water damage.
AIM HAND HELD BIDET INSTRUCTION
1.Durable Brass Sprayer
2.Solid Brass A
Adaptor with Shut off
valve
3.44 Inches of Stainless Steel
coated flexible hose
4. Wall Mounted
Sprayer Holder
Handheld Bidet
PlatiunmSeries
Installaon Instrucons
CAUTION: Do not over ght en any connecons. O
ver
ghtening connecons can cause damage to the parts.
Shut off water supply
to t
oilet. Flush toilet
to drain all water
inside the tank.
2.
Disconnect the
supply line from the
toilet fill valve.
Aach 7/8” T-Valve
Shutoff to the
threaded fill valve on
your toilet. Be sure
the 7/8” Flat Washer
is in the T-Valve before installing.Posion the T-Valve so
that the shutoff handle is facing the front of the toilet.
3.
Reaach your
e
xisng toilet supply
line to the boom of
the T-Valve. Be sure
all connecons are
secure, and no
leaking or water is
present.
1.
Toilet supply line
Toilet supply line
4.
Attach the hex-
head end of the
hose to the T-Valve.
5.
Attach the Handheld
Bidet to the other
end of the supply
hose.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Aim to Wash! 90-7775 Installation guide

Brand
Aim to Wash!
Model
90-7775
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents