2. GW Instek
  3. GRA-438

GW Instek GRA-438 User manual

  • Hello! I've reviewed the assembly manual for the GW Instek GRA-438 rack adapter, which is designed to mount the GSB-01 and GSB-02 series multiplex scanner boxes in a standard 19" rack. The manual provides step-by-step instructions for a simple installation. I'm ready to answer any questions you might have about the assembly process or the product itself.
  • What is the GRA-438 designed for?
    What size rack does the GRA-438 fit?
    How many GSB units can the GRA-438 hold?
Rack Adapter Panel
GRA-438
Assembly Manual
GW INSTEK PART NO. 82RA-43800M01
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER
GRA-438 Assembly Manual
2
GRA-438
Overview
The GRA-438 rack mount is specifically suited for the GSB-01 & GSB-02 Series
Multiplex Scanner Box. The GRA-438 is designed to hold one GSB unit and fits
in a standard 19” 2U rack.
Rack Mount Adapter Component List
Description
Please check to make sure all the components of the
GRA-438 rack mount kit are well provided as listed below.
GRA-438
Assembly
Item
Part NO.
Description
QTY
1
62RA-438HP101
GRA-438 RIGHT BRACKET
1
2
62RA-438HP201
GRA-438 LEFT BRACKET
1
3
592B-W3008NS1
SCREW PMS ,+ ,M3*8 ,ISO ,N
(WASHER P.S) ,RoHS
4
GRA-438 Assembly Manual
3
Rack Adaptor Assembly
Steps
1. Loosen the 4 screws followed by dismantling both
screws and protection feet from the GSB unit.
2. Further loosen the 4 screws in both left and right sides of
the front end (2 screws in each side, respectively).
GRA-438 Assembly Manual
4
3. Fasten the GRA-438 along with its screws on both sides
of the GSB unit.
4. The assembly is completed accordingly.
/