2. Baldwin Boxall
  3. BVOC16MS

Baldwin Boxall BVOC16MS Operating instructions

  • Hello! I've reviewed the user instructions for the BALDWIN BOXALL OmniCare Control Panel. This document details how to use the system in case of emergencies, including answering calls, communicating with specific locations, and ending emergencies. I'm ready to help with any questions you may have about these procedures or the features described in the document!
  • How to answer an incoming call?
    How to finish a call?
    How to speak to a previous caller?
    How to speak to all previous callers?
    What to do when the emergency is over?
Flashing red LED & handset ringing = incoming call
To Answer a Call
Lift handset.
You will automatically be connected to the caller.
To finish a call, replace the handset.
The red LED stays on to show that
someone is at that location.
To Speak to a Previous Caller
Lift the handset and press the area button.
You will be connected to the caller.
To Speak to All Previous Callers
Press the ‘ALL’ button and speak into the handset.
When Emergency is Over
Replace handset, then press and hold each Area
Button in turn until the red Call Indicator goes
out.
Call
Indicator
Area
Button
IN CASE OF EMERGENCY
DISABLED REFUGE SYSTEM
OPERATING INSTRUCTIONS
C O M M U N I C A T I O N S
B A L D W I N B O X L L
/