Page is loading ...
2
English Deutsch Français
1
Rechargeable battery
(BSL1415, BSL1415X)
Akkumulator
(BSL1415, BSL1415X)
Batterie rechargeable
(BSL1415, BSL1415X)
2
Rechargeable battery
(BSL1430)
Akkumulator
(BSL1430)
Batterie rechargeable
(BSL1430)
3
Rechargeable battery
(BSL1815X)
Akkumulator
(BSL1815X)
Batterie rechargeable
(BSL1815X)
4
Rechargeable battery
(BSL1830)
Akkumulator
(BSL1830)
Batterie rechargeable
(BSL1830)
5
Pilot lamp Ladungsstatuslampe Voyant d’état de chargement
6
Guide rail Führungsschiene Glissière
7
Cooling fan Ventilator Ventilateur de refroidissement
8
Caution plate Warnschild Plaque d’avertissement
9
Nameplate Typenschild Plaque signalétique
0
Line Leitung Ligne
!
Strap Band Courroie
@
Connecting socket Anschlussbuchse Prise de raccordement
#
Charger connecting plug Anschlussbuchse des Ladegeräts Prise du chargeur
$
Cigarette lighter connecting plug
Anschlussbuchse des
Zigarettenanzünders
Prise de l’allume-cigare
%
Before insert Vor Einführen Avant insertion
^
After insert Nach Einführen Après insertion
1
2
3
4
#
$
0
0
<BSL1415>
<BSL1415X>
<BSL1430>
<BSL1815X>
<BSL1830>
% ^
5
!
8
9
@
6
7
12
Page is loading ...
Page is loading ...
5
Symbols
WARNING
The following show
symbols used for the
machine. Be sure that you
understand their meaning
before use.
Symbole
WARNUNG
Die folgenden Symbole
werden für diese Maschine
verwendet. Achten Sie
darauf, diese vor der
Verwendung zu verstehen.
Symboles
AVERTISSEMENT
Les symboles suivants
sont utilisés pour l’outil.
Bien se familiariser avec
leur signifi cation avant
d’utiliser l’outil.
Simboli
AVVERTENZA
Di seguito mostriamo i
simboli usati per la macchina.
Assicurarsi di comprenderne
il signifi cato prima dell’uso.
Read all safety warnings
and all instructions.
Failure to follow the
warnings and instructions
may result in electric
shock, fi re and/or serious
injury.
Lesen Sie sämtliche
Sicherheitshinweise und
Anweisungen durch.
Wenn die Warnungen
und Anweisungen nicht
befolgt werden, kann es
zu Stromschlag, Brand
und/oder ernsthaften
Verletzungen kommen.
Lire tous les
avertissements de
sécurité et toutes les
instructions.
Tout manquement à observer
ces avertissements et
instructions peut engendrer
des chocs électriques,
des incendies et/ou des
blessures graves.
Leggere tutti gli
avvertimenti di
sicurezza e tutte le
istruzioni.
La mancata osservanza
degli avvertimenti e delle
istruzioni potrebbe essere
causa di scosse elettriche,
incendi e/o gravi lesioni.
Only for EU countries
Do not dispose of electric tools
together with household waste
material!
In observance of European
Directive 2002/96/EC
on waste electrical and
electronic equipment and its
implementation in accordance
with national law, electric tools
that have reached the end of
their life must be collected
separately and returned to an
environmentally compatible
recycling facility.
Nur für EU-Länder
Werfen Sie Elektrowerkzeuge
nicht in den Hausmüll!
Gemäss Europäischer
Richtlinie 2002/96/EG über
Elektro- und Elektronik-
Altgeräte und Umsetzung
in nationales Recht müssen
verbrauchte Elektrowerkzeuge
getrennt gesammelt und
einer umweltgerechten
Wiederververtung zugeführt
werden.
Pour les pays européens
uniquement
Ne pas jeter les appareils
électriques dans les ordures
ménagères!
Conformément à la directive
européenne 2002/96/EG relative
aux déchets d’équipements
électriques ou électroniques
(DEEE), et à sa transposition
dans la législation nationale, les
appareils électriques doivent être
collectés à part et être soumis
à un recyclage respectueux de
l’environnement.
Solo per Paesi UE
Non gettare le apparecchiature
elettriche tra i rifi uti domestici.
Secondo la Direttiva Europea
2002/96/CE sui rifi uti di
apparecchiature elettriche ed
elettroniche e la sua attuazione
in conformità alle norme
nazionali, le apparecchiature
elettriche esauste devono essere
raccolte separatamente, al fi ne
di essere reimpiegate in modo
eco-compatibile.
Symbolen
WAARSCHUWING
Hieronder staan symbolen
afgebeeld die van
toepassing zijn op deze
machine. U moet de
betekenis hiervan begrijpen
voor gebruik.
Símbolos
ADVERTENCIA
A continuación se
muestran los símbolos
usados para la máquina.
Asegúrese de comprender
su signifi cado antes del
uso.
Símbolos
AVISO
A seguir aparecem os
símbolos utilizados pela
máquina. Assimile bem
seus signifi cados antes
do uso.
Σύμβολα
ΠΡΟΣΟΧΗ
.
.
Lees alle
waarschuwingen en
instructies aandachtig
door.
Nalating om de
waarschuwingen en
instructies op te volgen
kan in een elektrische
schok, brand en/of ernstig
letsel resulteren.
Lea todas las
instrucciones y
advertencias de
seguridad.
Si no se siguen
las advertencias e
instrucciones, podría
producirse una descarga
eléctrica, un incendio y/o
daños graves.
Leia todas as instruções
e avisos de segurança.
Se não seguir todas as
instruções e os avisos,
pode provocar um choque
eléctrico, incêndio e/ou
ferimentos graves.
Διαβάζετε όλες τις
προειδοποιήσεις
ασφαλείας και όλες τις
οδηγίες.
,
/ .
Alleen voor EU-landen
Geef elektrisch gereedschap niet
met het huisvuil mee!
Volgens de Europese richtlijn
2002/96/EG inzake oude
elektrische en elektronische
apparaten en de toepassing
daarvan binnen de nationale
wetgeving, dient gebruikt
elektrisch gereedschap
gescheiden te worden ingezameld
en te worden afgevoerd naar een
recycle bedrijf dat voldoet aan
de
geldende milieu-eisen
.
Sólo para países de la Unión
Europea
¡No deseche los aparatos
eléctricos junto con los residuos
domésticos!
De conformidad con la Directiva
Europea 2002/96/CE sobre
residuos de aparatos eléctricos
y electrónicos y su aplicación
de acuerdo con la legislación
nacional, las herramientas
eléctricas cuya vida útil haya
llegado a su fi n se deberán
recoger por separado y trasladar
a una planta de reciclaje que
cumpla con las exigencias
ecológicas.
Apenas para países da UE
Não deite ferramentas eléctricas
no lixo doméstico!
De acordo com a directiva
europeia 2002/96/CE sobre
ferramentas eléctricas e
electrónicas usadas e a
transposição para as leis
nacionais, as ferramentas
eléctricas usadas devem ser
recolhidas em separado e
encaminhadas a uma instalação
de reciclagem dos materiais
ecológica.
!
2002/ 96/
,
.
Page is loading ...
7
English
GENERAL OPERATIONAL PRECAUTIONS
1. Keep work area clean. Cluttered areas and benches
invite accidents.
2. Avoid dangerous environment. Don’t expose power
tools and charger to rain. Don’t use power tools and
charger in damp or wet locations. And keep work area
well lit.
Never use power tools and charger near fl ammable or
explosive materials.
Do not use tool and charger in presence of fl ammable
liquids or gases.
3. The appliance is not intended for use by young children
or infi rm persons without supervision. Young children
should be supervised to ensure that they do not play
with the appliance. All visitors should be kept safe
distance from work area.
4. Store idle tools and charger. When not in use, tools
and charger should be stored in dry, high or locked-
up place — out of reach or children. Store tools and
charger in a place in which the temperature is less than
40°C.
5. Don’t abuse cord. Never carry charger by cord or yank
it to disconnect from receptacle. Keep cord from heat,
oil and sharp edges.
6. When the charger is not in use or when being
maintained and inspected, disconnect the power cord
of the charger from the receptacle.
7. To avoid danger, always use only the specifi ed
charger.
8. Use only genuine HITACHI replacement parts.
9. Do not use power tools and charger for applications
other than those specifi ed in the Handling Instructions.
10. To avoid personal injury, use only the accessories
or attachment recommended in these handling
instructions or in the HITACHI catalog.
11. If the supply cord is damaged, it must be replaced
by the manufacture or its service agent or a similarly
qualifi ed person in order to avoid a hazard.
Let only the authorized service center do the
repairing. The Manufacture will not be responsible
for any damages or injuries caused by repair by the
unauthorized persons or by mishandling of the tool.
12. To ensure the designed operational integrity of power
tools and charger, do not remove installed covers or
screws.
13. Always use the charger at the voltage specifi ed on the
nameplate.
14. Always charge the battery before use.
15. Never use a battery other than that specifi ed. Do not
connect a usual dry cell, a rechargeable battery other
than that specifi ed or a car battery to the power tool.
16. Do not use a transformer containing a booster.
17. Do not charge the battery from an engine electric
generator.
18. Always charge indoors. Because the charger and
battery heat slightly during charging, charge the
battery in a place not exposed to direct sunlight; where
the humidity is low and the ventilation is good.
19. Use the exploded assembly drawing on this handling
instructions only for authorized servicing.
PRECAUTIONS FOR CHARGER
1. Always charge the battery at an ambient temperature
of 0–40°C. A temperature of less than 0°C will result in
over charging which is dangerous. The battery cannot
be charged at a temperature greater than 40°C.
The most suitable temperature for charging is that of
20–25°C.
2. Do not use the charger continuously.
When one charging is completed, leave the charger for
about 15 minutes before the next charging of battery.
3. Do not allow foreign matter to enter the hole for
connecting the rechargeable battery.
4. Never disassemble the rechargeable battery or
charger.
5. Never short-circuit the rechargeable battery.
Short-circuiting the battery will cause a great electric
current and overheat. It results in burn or damage to
the battery.
6. Do not dispose of the battery in fi re.
If the battery is burnt, it may explode.
7. Using an exhausted battery will damage the charger.
8. Bring the battery to the shop from which it was
purchased as soon as the post-charging battery life
becomes too short for practical use. Do not dispose of
the exhausted battery.
9. Do not insert objects into the air ventilation slots of the
charger.
Inserting metal objects or fl ammable into the charger
air ventilation slots will result in an electrical shock
hazard or damage to the charger.
PRECAUTIONS WHEN USING THE
BATTERYCHARGER WITH A DC 12V IN-CAR
POWER SOURCE
1. Use the battery charger correctly.
Do not use the battery charger other than with a DC
12V in-car power source. The battery charger is solely
for use on minus-grounded vehicles. Make sure that
the minus pole of the car battery is connected to the
car body.
2. Keep your attention focused on driving the car.
If you use the battery charger while driving, fasten
the battery charger in place so that it does not move
inadvertently and distract your attention from driving.
Do not place the battery charger or battery under the
driver’s seat, irrespective of whether it is charging or
not, as it may get under the brake pedal or the cable
may get wrapped around the driver’s feet and cause an
accident.
3. Do not manipulate the battery charger or battery
while driving as this may cause an accident.
4. Do not leave the battery charger or battery within
reach of children as this may result in an accident.
5. Be sure to use the cable provided.
Using a di erent cable could result in a fi re or
accident due to overheating.
6. Do not place the battery charger on a blanket-type
car seat cover or car mat during charging as this may
result in a fi re or accident due to overheating.
7. Do no expose the battery charger to direct sunlight
during charging as this may result in a fi re.
8. Do not leave the vehicle unattended during charging.
9. Do not charge the battery using an AC power source
and DC 12V in-car power source together.
It causes charging failure and, more importantly, may
result in a fi re.
(Original instructions)
8
English
SPECIFICATION
CHARGER
Model UC18YML2
Power source AC DC12 V (in-Car)
Charging time Approx. 22 – 45 minutes Approx. 60 – 120 minutes
Charging voltage 14.4 – 18 V
Weight 0.7 kg
AC/DC Dual Power Charger included:
Charge battery from AC mains socket or 12V DC car cigarette lighter socket.
APPLICATION
For charging the HITACHI BATTERY
○ BSL1415, BSL1415X, BSL1430, BSL1815X, BSL1830
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect to the power source
When charging the battery from an AC power source
○ Connect the charger’s power cord to the
receptacle.
When connecting the plug of the charger to a
receptacle, the pilot lamp will blink in red (At 1-second
intervals).
CAUTION
Do not use the electrical cord if damaged. Have it
repaired immediately.
When charging the battery from a DC 12V in-car power
source
○ Secure the battery charger in place in the car.
Use the strap supplied with the battery charger to
fasten the battery charger in place and prevent it from
moving inadvertently. (See Fig. 3)
CAUTION
Do not place the battery charger or battery under
the driver’s seat. Secure the battery charger in
place to prevent it from moving inadvertently as
this may lead to an accident.
Fig. 3
○ Insert the cigarette lighter connecting plug into the
cigarette lighter socket.
If the plug is loose and falls out of the cigarette lighter
socket, repair the socket. As the socket may be faulty,
you are recommended to contact your local car dealer.
Continued use of the socket may result in an accident
due to overheating.
2. Insert the battery into the charger.
Firmly insert the battery into the charger until the line is
visible, as shown in Fig. 1, 2.
3. Charging
When inserting a battery in the charger, the pilot lamp
will light up continuously in red.
When the battery becomes fully recharged, the pilot
lamp will blink in red (At 1-second intervals). (See
Table 1)
(1) Pilot lamp indication
The indications of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or
the rechargeable battery.
Table 1
Indications of the pilot lamp
The pilot
lamp
lights or
blinks in
red.
Before
charging
Blinks Lights for 0.5 seconds. Does not light for
0.5 seconds. (o for 0.5 seconds)
While
charging
Lights Lights continuously
Charging
complete
Blinks Lights for 0.5 seconds. Does not light for
0.5 seconds. (o for 0.5 seconds)
Charging
impossible
Flickers Lights for 0.1 seconds. Does not light for
0.1 seconds. (o for 0.1 seconds)
Malfunction in the
battery or the charger
The pilot
lamp
lights or
blinks in
green.
Overheat
standby
Lights Lights continuously
Battery overheated.
Unable to charge.
(Charging will commence
when battery cools)
Charging
with in-car
power source
impossible
Blinks Lights for 0.5 seconds. Does not light for
0.5 seconds. (o for 0.5 seconds)
Malfunction of the car
battery
NOTE: When standby for cooling battery, UC18YML2 cools the overheated battery by cooling fan.
(However, the cooling fan does not function when charging the battery with a DC 12V in-car power source.)
9
English
(2) Regarding the temperature of the rechargeable
battery.
The temperatures for rechargeable batteries are as
shown in the table below, and batteries that have
become hot should be cooled for a while before being
recharged.
Table 2
Temperatures at which the battery can be recharged
0°C - 50°C
(3) Regarding recharging time
Table 3 shows the recharging time required according
to the type of battery.
Table 3 Recharging time (approx. min.) at 20°C
(AC power supply/DC 12V (in-car) power supply)
Battery capacity (Ah)
Battery
Voltage
(V)
Li-ion BATTERY
1.5 Ah 3.0 Ah
14.4 V
BSL1415
BSL1415X
(4 cells)
22/60
min.
BSL1430
(8 cells)
45/120
min.
18 V
BSL1815X
(5 cells)
22/60
min.
BSL1830
(10 cells)
45/120
min.
NOTE
The recharging time may vary according to the
ambient temperature.
Especially, using a DC 12V in-car power source may
require longer recharging time at high temperatures.
E.g., approx. 170-180 min (3.0 Ah) at 40°C
4. Disconnect the charger’s power cord from the
receptacle or cigarette lighter socket
5. Hold the charger fi rmly and pull out the battery
NOTE
Be sure to pull out the battery from the charger after
use, and then keep it.
Regarding electric discharge in case of new
batteries, etc.
As the internal chemical substance of new batteries
and batteries that have not been used for an extended
period is not activated, the electric discharge might be
low when using them the fi rst and second time. This is
a temporary phenomenon, and normal time required
for recharging will be restored by recharging the
batteries 2–3 times.
How to make the batteries perform longer.
(1) Recharge the batteries before they become
completely exhausted.
When you feel that the power of the tool becomes
weaker, stop using the tool and recharge its battery.
If you continue to use the tool and exhaust the electric
current, the battery may be damaged and its life will
become shorter.
(2) Avoid recharging at high temperatures.
A rechargeable battery will be hot immediately after
use. If such a battery is recharged immediately after
use, its internal chemical substance will deteriorate,
and the battery life will be shortened. Leave the battery
and recharge it after it has cooled for a while.
CAUTION
○ If the battery is charged while it is heated because
it has been left for a long time in a location subject
to direct sunlight or because the battery has just
been used, the pilot lamp of the charger lights up
green. In such a case, fi rst let the battery cool, then
start charging.
○ When the pilot lamp fl ickers in red (at 0.2-seconds
intervals), check for and take out any foreign objects
in the charger’s battery connector. If there are no
foreign objects, it is probable that the battery or
charger is malfunctioning. Take it to your authorized
Service Center.
○ Since the built-in micro computer takes about 3
seconds to confi rm that the battery being charged
with UC18YML2 is taken out, wait for a minimum
of 3 seconds before reinserting it to continue charging.
If the battery is reinserted within 3 seconds, the battery
may not be properly charged.
○ Check the voltage of the in-car power source when
the pilot lamp fl ickers in green (every 0.2 seconds)
continuously.
If the voltage is 12V or lower, it indicates that the car
battery has weakened and cannot be charged.
○ If the pilot lamp does not blink in red (every second)
even though the charger cord or cigarette lighter
connecting plug is connected to the power, it indicates
that the protection circuit of the charger may be
activated.
Remove the cord or plug from the power and then
connect it again after 30 seconds or so.If this does
not cause the pilot lamp to blink in red (every second),
please take the charger to the Hitachi Authorized
Service Center.
MAINTENANCE AND INSPECTION
1. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that
they are properly tightened. Should any of the screws
be loose, retighten them immediately. Failure to do so
could result in serious hazard.
2. Cleaning of the charger
When the charger is stained, wipe with a soft dry cloth
or a cloth moistened with soapy water. Do not use
chloric solvents, gasoline or paint thinner, for they melt
plastics.
3. Store idle charger
When not in use, the charger should be stored in dry,
high or locked-up place — out of reach of children.
4. Fuse replacement of cigarette lighter connecting
plug
CAUTION
For continued protection against risk of fi re,
replaceonly with same type and ratings of fuse in
cigarette lighter connecting plug.
250V, 6A, DC
5. Service parts list
CAUTION
Repair, modifi cation and inspection of Hitachi Power
Tools must be carried out by a Hitachi Authorized
Service Center.
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modifi ed to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without prior
notice.
NOTE
Due to HITACHI’s continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
54
䎤
21
9
9
A
501
502
1
2
3
5
6
8
4
11
12
13
15
16
4
17
6
22
10
20
14
18
7
19
ITEM
NO.
PART NAME Q’TY
1
CAUTION PLATE 1
2CASE (A) 1
3 FILTER 1
4 TP TAPPING SCREW D3 × 84
5FUSE 1
6NUT M3 7
7 INSULATOR (A) 1
8FIN (A) 1
9
MACHINE SCREW (W/WASHERS) M3 × 12
6
10 FIN (B) 1
11 CASE (B) 1
12
TAPPING SCREW (W/FLANGE) D3 × 18
4
13 CASE RUBBER 4
14 NAME PLATE 1
15 PRISM 1
16 TERMINAL HOLDER 1
17 BINDING BAND 1
18 CORD 1
19 PRINTED CIRCUIT BOARD ASS'Y 1
20
TAPPING SCREW (W/FLANGE) D3 × 25
2
21 FAN 1
22 INSULATOR (B) 1
501 STRAP 1
502 DC CORD 1
55
Hitachi Power Tools Europe GmbH
Siemensring 34, 47877 willich 1, F. R. Germany
Tel: +49 2154 49930
Fax: +49 2154 499350
URL: http://www.hitachi-powertools.de
Hitachi Power Tools Netherlands B. V.
Brabanthaven 11, 3433 PJ Nieuwegein, The Netherlands
Tel: +31 30 6084040
Fax: +31 30 6067266
URL: http://www.hitachi-powertools.nl
Hitachi Power Tools (U. K.) Ltd.
Precedent Drive, Rooksley, Milton Keynes, MK 13, 8PJ,
United Kingdom
Tel: +44 1908 660663
Fax: +44 1908 606642
URL: http://www.hitachi-powertools.co.uk
Hitachi Power Tools France S. A. S.
Prac del’ Eglantier 22, rue des Crerisiers Lisses, C. E.
1541, 91015 EVRY CEDEX, France
Tel: +33 1 69474949
Fax: +33 1 60861416
URL: http://www.hitachi-powertools.fr
Hitachi Power Tools Belgium N.V. /
S.A.
Koningin Astridlaan 51, 1780 Wemmel, Belgium
Tel: +32 2 460 1720
Fax: +32 2 460 2542
URL http://www.hitachi-powertools.be
Hitachi Fercad Power Tools Italia
S.p.A
Via Retrone 49-36077, Altavilla Vicentina (VI), Italy
Tel: +39 0444 548111
Fax: +39 0444 548110
URL: http://www.hitachi-powertools.it
Hitachi Power Tools lberica, S.A.
C / Migjorn, s/n, Poligono Norte, 08226 Terrassa,
Barcelona, Spain
Tel: +34 93 735 6722
Fax: +34 93 735 7442
URL: http://www.hitachi-powertools.es
Hitachi Power Tools Österreich GmbH
Str. 7, Objekt 58/A6, Industriezentrum NÖ –Süd 2355
Wiener Neudorf, Austria
Tel: +43 2236 64673/5
Fax: +43 2236 63373
Hitachi Power Tools Norway AS
Kjeller Vest 7
Postboks 124, 2007 Kjeller, Norway
Tel: (+47) 6692 6600
Fax: (+47) 6692 6650
URL: http://www.markt.no
Hitachi Power Tools Sweden AB
Rotebergsvagen 2B
SE-192 78 Sollentuna, Sweden
Tel: (+46) 8 598 999 00
Fax: (+46) 8 598 999 40
URL: http://www.markt.se
Hitachi Power Tools Denmark AS
Lillebaeltsvej 90
DK-6715 Esbjerg N, Denmark
Tel: (+45) 75 14 32 00
Fax: (+45) 75 14 36 66
URL: http://www.markt.dk
Hitachi Power Tools Finland OY
Tupalankatu 9
FIN-15680 Lahti, Finland
Tel: (+358) 20 7431 530
Fax: (+358) 20 7431 531
URL: http://www.markt.fi
004
Code No. C99173771 G
Printed in China
English Portugûes
EC DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in
conformity with standards or standardization documents EN60335,
EN55014 and EN61000 in accordance with Directives 2006/95/EC and
2004/108/EC.
This declaration is applicable to the product a xed CE marking..
DECLARAÇÃO DE CONFORMIDADE CE
Declaramos, sob nossa única e inteira responsabilidade, que este
produto está de acordo com as normas ou documentos normativos
EN60335, EN55014 e EN61000, em conformidade com as Directrizes
2006/95/CE e 2004/108/CE.
Esta declaração se aplica aos produtos designados CE.
Deutsch
ERKLÄRUNG ZUR KONFORMITÄT MIT CE-REGELN
Wir erklären mit alleiniger Verantwortung, dass dieses Produkt den
Standards oder Standardisierungsdokumenten EN60335, EN55014
und EN61000 in Übereinstimmung mit den Direktiven 2006/95/CE und
2004/108/CE entspricht.
Diese Erklärung gilt für Produkte, die die CE-Markierung tragen.
60335, 55014 61000
2006/95/ 2004/108/.
.
Français Svenska
DECLARATION DE CONFORMITE CE
Nous déclarons sous notre seule et entière responsabilité que ce
produit est conforme aux normes ou documents de normalisation
EN60335, EN55014 et EN61000 en accord avec les Directives
2006/95CE et 2004/108/CE.
Cette déclaration s’applique aux produits désignés CE.
EF-DEKLARATION BETRÄFFANDE LIKFORMIGHET
Vi tillkännagiver med eget ansvar att denna produkt överensstämmer
med standard eller standardiserings dokument EN60335, EN55014
och EN61000 i enlighet med direktiven 2006/95/EF och 2004/108/EF.
Denna deklaration gäller för CE-märkningen pà produkten.
Italiano
Dansk
DICHIARAZIONE DI CONFORMITÀ CE
Dichiariamo sotto nostra responsabilità che questo prodotto è
conforme agli standard o ai documenti sulla standardizzazione
EN60335, EN55014 e EN61000 in conformità alle Direttive 2006/95/
CE, e 2004/108/CE.
Questa dichiarazione è applicabile ai prodotti cui sono applicati i
marchi CE.
EF-OVERENSS TEMMELSESERKLÆRING
Vi erlkærer os fuldstændige ansvarlige for, at dette produkt modsvarer
gældende standard eller standardiserings dokumenter EN60335,
EN55014 og EN61000 i overens-stemmelse med direktiver 2006/95/
EF og 2004/108/EF.
Denne erklæring qælder produkter, der er mærket med CE.
Nederlands Norsk
EC VERKLARING VAN CONFORMITEIT
Wij verklaren onder eigen verantwoordelijkheid dat dit product
conform de richtlijnen of gestandardiseerde documenten EN60335,
EN55014 en EN61000 voldoet aan de eisen van bepalingen 2006/95/
EC en 2004/108/EC.
Deze verklaring is van toepassing op produkten voorzien van de CE-
markeringen.
EF’s ERKLÆRING OM OVERENSSTEMMELSE
Vi erklærer herved at vi påtar oss det fulle ansvar for at
dette produktet er i overensstemmelse med normer eller
standardiseringsdokumentene EN60335, EN55014 og EN61000 i
samsvar med direktivene 2006/95/EF og 2004/108/EF.
Denne erklæringen gjelder produktets påklistrede CE-merking.
Español Suomi
DECLARACIÓN DE CONFORMIDAD DE LA CE
Declaramos bajo nuestra única responsabilidad que este producto
está Declaramos bajo nuestra única responsabilidad que este
producto está de acuerdo con las normas o con los documentos de
normalización EN60335, EN55014 y EN61000, según indican las
Directrices 2006/95/CE y 2004/108/CE.
Esta declaración se aplica a los productos con marcas de la CE.
EY-ILMOITUS YHDENMUKAISUUDESTA
Yksinomaisella vastuudella vakuutamme, että tämä tuote vastaa tai
normitettuja dokumentteja EN60335, EN55014 ja EN61000 ohjeiden
2006/95/EY ja 2004/108/EY mukaisesti.
Tämä ilmoitus sovelletaan tuotekohtaiseen CE-merkintään.
Representative o ce in Europe
Hitachi Power Tools Europe GmbH
Siemensring 34, 47877 Willich 1, F. R. Germany
Head o ce in Japan
Hitachi Koki Co., Ltd.
Shinagawa Intercity Tower A, 15-1, Konan 2-chome,
Minato-ku, Tokyo, Japan
29. 4. 2010
K. Kato
Board Director
/
