Sony STR-DN1070 Operating Instructions Manual

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\010COV.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

STR-DN1070

Multi Channel

AV Receiver

Operating Instructions

2

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\020REG.fm4-

583-748-13(1)

masterpage: Left

STR-DN1070

4-583-748-13(1)

For the customers in the USA

Owner’s Record

The model and serial numbers are located on

the rear of the receiver. Record these numbers in

the spaces provided below. Refer to them

whenever you call upon your Sony dealer

regarding this product.

Model No.

Serial No.

To reduce the risk of fire or electric shock,

do not expose this apparatus to rain or

moisture.

To reduce the risk of fire, do not cover the

ventilation opening of the appliance with

newspapers, tablecloths, curtains, etc.

Do not expose the appliance to naked flame

sources (for example, lighted candles).

To reduce the risk of fire or electric shock, do not

expose this appliance to dripping or splashing,

and do not place objects filled with liquids, such

as vases, on the appliance.

Do not install the appliance in a confined space,

such as a bookcase or built-in cabinet.

Do not expose batteries or appliances with

battery-installed to excessive heat, such as

sunshine and fire.

As the main plug is used to disconnect the unit

from the mains, connect the unit to an easily

accessible AC outlet. Should you notice an

abnormality in the unit, disconnect the main

plug from the AC outlet immediately.

The unit is not disconnected from the mains as

long as it is connected to the AC outlet, even if

the unit itself has been turned off.

This symbol is intended to alert the

user to the presence of the Hot

Surface that may be hot if it is

touched during the normal

operation.

FOR UNITED STATES CUSTOMERS. NOT

APPLICABLE IN CANADA, INCLUDING IN

THE PROVINCE OF QUEBEC.

POUR LES CONSOMMATEURS AUX

ÉTATS-UNIS. NON APPLICABLE AU

CANADA, Y COMPRIS LA PROVINCE DE

QUÉBEC.

For the customers in the USA

This symbol is intended to alert the

user to the presence of uninsulated

“dangerous voltage” within the

product’s enclosure that may be of

sufficient magnitude to constitute a

risk of electric shock to persons.

This symbol is intended to alert the

user to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the

appliance.

Important Safety Instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install

in accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as

radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce

heat.

9) Do not defeat the safety purpose of the

polarized or grounding-type plug. A

polarized plug has two blades with one wider

than the other. A grounding type plug has

two blades and a third grounding prong. The

wide blade or the third prong are provided

for your safety. If the provided plug does not

fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10) Protect the power cord from being walked on

or pinched particularly at plugs, convenience

receptacles, and the point where they exit

from the apparatus.

11) Only use attachments/accessories specified

by the manufacturer.

WARNING

3

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\020REG.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

12) Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer, or

sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning

storms or when unused for long periods of

time.

14) Refer all servicing to qualified service

personnel. Servicing is required when the

apparatus has been damaged in any way,

such as power-supply cord or plug is

damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does

not operate normally, or has been dropped.

NOTE:

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation. This equipment generates, uses and

can radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference to

radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

 Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

You are cautioned that any changes or

modifications not expressly approved in this

manual could void your authority to operate this

equipment.

Properly shielded and grounded cables and

connectors must be used for connection to host

computers and/or peripherals in order to meet

FCC emission limits.

To reduce the risk of electric shock, the speaker

cable should be connected to the apparatus and

the speakers in accordance with the following

instructions.

1) Disconnect the AC power cord from the

MAINS.

2) Strip 10 to 15 mm of the wire insulation of the

speaker cable.

3) Connect the speaker cable to the apparatus

and the speakers carefully so as not to touch

the core of speaker cable by hand. Also

disconnect the AC power cord from the

MAINS before disconnecting the speaker

cable from the apparatus and the speakers.

This equipment must not be co-located or

operated in conjunction with any other antenna

or transmitter.

This equipment complies with FCC radiation

exposure limits set forth for an uncontrolled

environment and meets the FCC radio frequency

(RF) Exposure Guidelines. This equipment has

very low levels of RF energy that is deemed to

comply without maximum permissive exposure

evaluation (MPE).

5.47 GHz – 5.725 GHz band is restricted to indoor

operations only.

Compliance with FCC requirement 15.407(c)

Data transmission is always initiated by

software, which is the passed down through the

MAC, through the digital and analog baseband,

and finally to the RF chip. Several special packets

are initiated by the MAC. These are the only ways

the digital baseband portion will turn on the RF

transmitter, which it then turns off at the end of

the packet.

Therefore, the transmitter will be on only while

one of the aforementioned packets is being

transmitted. In other words, this device

automatically discontinue transmission in case

of either absence of information to transmit or

operational failure.

Frequency Tolerance: ±20 ppm

For the customers in Canada

Properly shielded and grounded cables and

connectors must be used for connection to host

computers and/or peripherals.

This device complies with Industry Canada’s

licence-exempt RSSs. Operation is subject to the

following two conditions:

(1) This device may not cause interference; and

(2) This device must accept any interference,

including interference that may cause undesired

operation of the device.

4

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\020REG.fm4-

583-748-13(1)

masterpage: Left

STR-DN1070

4-583-748-13(1)

This equipment complies with IC radiation

exposure limits set forth for an uncontrolled

environment and meets RSS-102 of the IC radio

frequency (RF) Exposure rules. This equipment

has very low levels of RF energy that is deemed

to comply without maximum permissive

exposure evaluation (MPE). But it is desirable

that it should be installed and operated keeping

the radiator at least 20 cm or more away from

person’s body.

5,150 MHz – 5,250 MHz band is restricted to

indoor operations only.

High-power radars are allocated as primary

users (i.e. priority users) of the bands

5,250 MHz – 5,350 MHz and 5,650 MHz –

5,850 MHz and that these radars could cause

interference and/or damage to LE-LAN devices.

For the customers in Australia and New

Zealand

This equipment should be installed and

operated with at least 20 cm and more between

the radiator and person’s body (excluding

extremities: hands, wrists, feet and ankles).

For the customers in Australia

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

For the customers in Europe

Disposal of waste batteries

and electrical and electronic

equipment (applicable in the

European Union and other

European countries with

separate collection systems)

This symbol on the product, the battery or on the

packaging indicates that the product and the

battery shall not be treated as household waste.

On certain batteries this symbol might be used

in combination with a chemical symbol. The

chemical symbols for mercury (Hg) or lead (Pb)

are added if the battery contains more than

0.0005% mercury or 0.004% lead. By ensuring

these products and batteries are disposed of

correctly, you will help prevent potentially

negative consequences for the environment and

human health which could otherwise be caused

by inappropriate waste handling. The recycling

of the materials will help to conserve natural

resources.

In case of products that for safety, performance

or data integrity reasons require a permanent

connection with an incorporated battery, this

battery should be replaced by qualified service

staff only. To ensure that the battery and the

electrical and electronic equipment will be

treated properly, hand over these products at

end-of-life to the applicable collection point for

the recycling of electrical and electronic

equipment. For all other batteries, please view

the section on how to remove the battery from

the product safely. Hand the battery over to the

applicable collection point for the recycling of

waste batteries. For more detailed information

about recycling of this product or battery, please

contact your local Civic Office, your household

waste disposal service or the shop where you

purchased the product or battery.

Notice for customers: the following

information is only applicable to

equipment sold in countries applying EU

directives

This product has been manufactured by or on

behalf of Sony Corporation, 1-7-1 Konan

Minato-ku Tokyo, 108-0075 Japan. Inquiries

related to product compliance based on

European Union legislation shall be addressed

to the authorized representative, Sony Belgium,

bijkantoor van Sony Europe Limited, Da

Vincilaan 7-D1, 1935 Zaventem, Belgium. For any

service or guarantee matters, please refer to the

addresses provided in the separate service or

guarantee documents.

5

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\020REG.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

Hereby, Sony Corp., declares that this

equipment is in compliance with the essential

requirements and other relevant provisions of

Directive 1999/5/EC.

For details, please access the following URL:

http://www.compliance.sony.de/

This product is intended to be used in the

following countries.

AT, BE, BG, HR, CZ, DK, EE, FI, FR, DE, GR, HU, IS,

IE, IT, LV, LT, LU, NL, NO, PL, PT, RO, SK, SI, ES, SE,

CH, GB, BA, MK, RS

5,150 MHz – 5,350 MHz band is restricted to

indoor operations only.

This Multi Channel AV Receiver is intended for

sound and video playback from connected

devices, music streaming from an NFC-

compatible smartphone or a BLUETOOTH

device, and FM tuner. This system also supports

network streaming and Screen mirroring.

This equipment has been tested and found to

comply with the limits set out in the EMC

regulation using a connection cable shorter than

3 meters.

Excessive sound pressure from earphones and

headphones can cause hearing loss.

6

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\020REG.fm4-

583-748-13(1)

masterpage: Left

STR-DN1070

4-583-748-13(1)

Manuals provided for this product

The following manuals are provided for this product.

The information included in each manual is as shown below:

Preparation

Installation

Connections

Initial Setup

Basic operations

Listening/Watching

Advanced operations

Listening/Watching

Advanced operations

BLUETOOTH function

Network features

Other features

Adjusting Settings

Troubleshooting

Precautions / Specifications

Startup

Guide

Operating

Instructions

(this booklet)

Help Guide

(online)

For the customers in Europe

http://rd1.sony.net/help/ha/strdn107/h_eu/

For the customers in other areas

http://rd1.sony.net/help/ha/strdn107/h_zz/

To read the Help Guide, go to the following website:

7

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\020REG.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

About These Operating

Instructions

The instructions in these Operating Instructions

describe the controls on the remote control.

You can also use the controls on the receiver if

they have the same or similar names as those

on the remote control.

Some illustrations are presented as conceptual

drawings, and may be different from the actual

products.

The items displayed on the TV screen may vary

depending on the area.

The text enclosed in bracket ([--]) appears on

the TV screen, and the text enclosed in double

quotation mark (“--”) appears on the display

panel.

This receiver incorporates Dolby* Digital and Pro

Logic Surround and the DTS** Digital Surround

System.

* Manufactured under license from Dolby

Laboratories. Dolby, Pro Logic, Surround EX,

and the double-D symbol are trademarks of

Dolby Laboratories.

** For DTS patents, see http://patents.dts.com.

Manufactured under license from DTS

Licensing Limited. DTS, DTS-HD, the Symbol,

& DTS and the Symbol together are registered

trademarks, and DTS-HD Master Audio is a

trademark of DTS, Inc. © DTS, Inc. All Rights

Reserved.

This receiver incorporates High-Definition

Multimedia Interface (HDMI™) technology.

The terms HDMI and HDMI High-Definition

Multimedia Interface, and the HDMI Logo are

trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other

countries.

Apple, the Apple logo, AirPlay, iPad, iPhone,

iPod, iPod touch, and Retina are trademarks of

Apple Inc., registered in the U.S. and other

countries.

iPad Air and iPad mini are trademarks of Apple

Inc.

App Store is a service mark of Apple Inc.

“Made for iPod,” “Made for iPhone,” and “Made

for iPad” mean that an electronic accessory has

been designed to connect specifically to iPod,

iPhone, or iPad, respectively, and has been

certified by the developer to meet Apple

performance standards. Apple is not responsible

for the operation of this device or its compliance

with safety and regulatory standards. Please

note that the use of this accessory with iPod,

iPhone, or iPad may affect wireless

performance.

Windows Media is either a registered trademark

or trademark of Microsoft Corporation in the

United States and/or other countries.

This product is protected by certain intellectual

property rights of Microsoft Corporation. Use or

distribution of such technology outside of this

product is prohibited without a license from

Microsoft or an authorized Microsoft subsidiary.

LDAC™ and LDAC logo are trademarks of Sony

Corporation.

MPEG Layer-3 audio coding technology and

patents licensed from Fraunhofer IIS and

Thomson.

“BRAVIA” is a trademark of Sony Corporation.

“PlayStation” is a registered trademark of Sony

Computer Entertainment Inc.

“WALKMAN” and “WALKMAN” logo are

registered trademarks of Sony Corporation.

MICROVAULT is a trademark of Sony

Corporation.

Wi-Fi®, Wi-Fi Protected Access®, Wi-Fi Alliance®

and Wi-Fi CERTIFIED Miracast® are registered

trademarks of Wi-Fi Alliance®.

Wi-Fi CERTIFIED™, WPA™, WPA2™, Wi-Fi

Protected Setup™ and Miracast™ are

trademarks of Wi-Fi Alliance®.

DLNA™, the DLNA Logo and DLNA CERTIFIED™

are trademarks, service marks, or certification

marks of the Digital Living Network Alliance.

The BLUETOOTH® word mark and logos are

registered trademarks owned by Bluetooth SIG,

Inc. and any use of such marks by Sony

Corporation is under license. Other trademarks

and trade names are those of their respective

owners.

The N-Mark is a trademark or registered

trademark of NFC Forum, Inc. in the United

States and in other countries.

Android™ is a trademark of Google Inc.

On copyrights

8

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\020REG.fm4-

583-748-13(1)

masterpage: Left

STR-DN1070

4-583-748-13(1)

Google Play™ is a trademark of Google Inc.

Google Cast™ is a trademark of Google Inc.

This product incorporates Spotify software

which is subject to 3rd party licenses found

here*:

https://developer.spotify.com/esdk-third-

party-licenses/

Spotify and Spotify logos are trademarks of the

Spotify Group.*

* This function may not be available in some

countries/regions.

All other trademarks and registered trademarks

are of their respective holders. In this manual, ™

and  marks are not specified.

Notice on End User License Agreement

(EULA)

For details of the EULA for this product, see

page 54.

For details of the EULA for network services,

please refer to [License agreement] in options

menu on each network service icon.

For details of the GPL, LGPL and other software

licenses, please refer to [Software License

Information] in [System Settings] of the [Setup]

menu on this product.

This product contains software that is subject to

the GNU General Public License (“GPL”) or GNU

Lesser General Public License (“LGPL”). These

establish that customers have the right to

acquire, modify, and redistribute the source

code of said software in accordance with the

terms of the GPL or the LGPL.

The source code for the software used in this

product is subject to the GPL and LGPL, and is

available on the Web.

To download, please access the following:

URL: http://oss.sony.net/Products/Linux

Please note that Sony cannot answer or respond

to any inquiries regarding the content of this

source code.

9

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\010COVTOC.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

Table of Contents

Manuals provided for this product ...............6

About These Operating Instructions ............ 7

Supplied Accessories ....................................9

Parts and Controls ....................................... 10

Preparation

Installing Speakers ...................................... 15

Connecting Speakers .................................. 16

Connecting a TV ..........................................24

Connecting Audio-Visual Devices ..............28

Connecting the Antenna (aerial) ................ 33

Connecting to a network ............................ 33

Connecting the AC Power Cord

(mains lead) ...........................................34

Setting up the Receiver using the Easy

Setup ......................................................34

Listening/Watching

Enjoying Sound and Video .........................36

Enjoying Sound Effects ...............................40

Listening to Audio with BLUETOOTH

Headphones ..........................................44

Listening to an Internet music service

(Google Cast) .........................................45

Additional Information

Updating the Software ...............................46

Troubleshooting .......................................... 47

Precautions .................................................50

Specifications .............................................. 51

END USER LICENSE AGREEMENT .................54

Supplied Accessories

 Remote control (1)

 R03 (size AAA) batteries (2)

 FM wire antenna (aerial) (1)

 Calibration microphone (1)

Insert two R03 (size AAA) batteries (supplied)

in the remote control. Make sure that the +

and – ends are in the correct position when

installing batteries.

Do not leave the remote control in an extremely

hot or humid place.

Do not use a new battery with old ones.

Do not mix manganese batteries and other kinds

of batteries.

Do not expose the remote control sensor to direct

sunlight or lights. Doing so may cause a

malfunction.

If you do not intend to use the remote control for

an extended period of time, remove the batteries

to avoid possible damage from battery leakage

and corrosion.

When the receiver no longer responds to the

remote control, replace both of the batteries with

new ones.

Inserting batteries into the

remote control

Note

10

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Left

STR-DN1070

4-583-748-13(1)

Parts and Controls

Front panel

 (power) (page 34)

 Power indicator

 SPEAKERS (page 36)

 CONNECTION PAIRING BLUETOOTH

Operates the BLUETOOTH function.

 TUNER PRESET +/–

Selects preset stations or channels.

 NFC sensor

 2CH/MULTI, MOVIE, MUSIC (page 40)

 Display panel (page 11)

 DISPLAY MODE

Displays information on the display panel.

 ZONE SELECT, ZONE POWER (page 37,

39)

 DIMMER

Adjusts the brightness of the display panel.

 Remote control sensor

Receives signals from remote control.

 PURE DIRECT

The indicator above the button lights up when

the Pure Direct function is activated.

 MASTER VOLUME (page 36)

 INPUT SELECTOR (page 37)

 HDMI (VIDEO 2 IN) jack

 (USB) port

Connect a USB device here.

 CALIBRATION MIC jack (page 35)

 PHONES jack

Connect headphones here.

Power indicator

 Green: The receiver is turned on.

 Amber: The receiver is in standby mode,

and you have set one of the following:

 [Control for HDMI], [Remote Start],

[Bluetooth Standby]*, or [Quick Start/

Network Standby]** is set to [On].

 [Standby Through] is set to [On] or [Auto].

 Power for Zone 2/3 or HDMI zone is set to

[On].

The indicator turns off when the receiver is in

standby mode and the following settings are

set to [Off]:

 [Control for HDMI], [Standby Through],

[Remote Start], [Bluetooth Standby], [Quick

Start/Network Standby]**, and the power

for all zones.

Receiver

11

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

* When [Bluetooth Standby] is activated, the

indicator lights up in amber only if a device has

been paired with the receiver. If no devices are

paired with the receiver, the indicator turns off.

** For USA, Canadian and Oceanian models only.

Indicators on the display panel

The indicator lights up to indicate the current status.

 Input indicator

Indicate the current input.

HDMI

Digital signals are input through the selected

HDMI jack.

ARC

TV input is selected and Audio Return Channel

(ARC) signals are detected.

COAX

Digital signals are input through the COAXIAL

jack.

OPT

Digital signals are input through the OPTICAL

jack.

 S.OPTIMIZER

The Sound Optimizer function is activated.

 D.C.A.C.

The measurement results of the Auto

Calibration function are applied.

 Dolby Digital Surround indicator*

The receiver is decoding the corresponding

Dolby Digital format signals.

 DTS(-HD) indicator*

The receiver is decoding the corresponding DTS

format signals.

 Speaker system indicator (page 36)

 ST

The receiver tunes to a stereo broadcast.

 HDMI OUT A + B

 SLEEP

Sleep timer is activated.

 EQ

Equalizer is activated.

 D.L.L.

The Digital Legato Linear (D.L.L.) function is

activated.

 D.R.C.

Dynamic range compression is activated.

 NEO:6

DTS Neo:6 Cinema/Music decoding is

activated.

 Dolby Pro Logic indicator

The receiver is processing Dolby Pro Logic

format signals. This matrix surround decoding

technology can enhance input signals.

These indicators may not light up depending on

the speaker pattern setting.

 ZONE, ZONE2, ZONE3

“ZONE2”, “ZONE3” or both light up while the

power to the corresponding zone is on.

“ZONE” and “HDMI OUT” light up when the

power for HDMI zone is on.

 A.P.M.

The A.P.M. (Automatic Phase Matching)

function is activated. You can only set the

A.P.M. function in the D.C.A.C. (Digital Cinema

Auto Calibration) function.

 UPDATE

New software is available.

 Wireless LAN signal strength indicator

Show the strength of the wireless LAN signal.

No signal

Weak signal

Moderate signal

Strong signal

Dolby Digital

TrueHD

Dolby TrueHD

DTS

DTS-HD

PL

Dolby Pro Logic

PLII

Dolby Pro Logic II

PLIIx

Dolby Pro Logic IIx

Note

12

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Left

STR-DN1070

4-583-748-13(1)

 Wired LAN indicator

A LAN cable is connected.

 BT

Lights up when a BLUETOOTH device is

connected. Flashes while connecting.

* When playing a Dolby Digital or DTS format disc,

make sure that you have completed the digital

connections and [Input Mode] is not set to

[Analog].

Rear panel

 COAXIAL IN jack

 HDMI IN/OUT jacks*

 IR REMOTE IN/OUT jacks

 You can control the receiver from a distance by

connecting an IR repeater (not supplied) to the

IR REMOTE IN jack.

 You can start or stop playback of devices such

as a CD player connected to the receiver by

connecting an IR Blaster (not supplied) to the

IR REMOTE OUT jack.

 Wireless LAN antenna

 LAN port

 SPEAKERS terminals

 ZONE 2 OUT jacks

 SUBWOOFER OUT jacks

 AUDIO IN jacks

 VIDEO IN/MONITOR OUT jacks

 FM ANTENNA terminal

 OPTICAL IN jack

* HDCP 2.2 is newly enhanced copyright protection

technology that is used to protect content such as

4K movies.

Connect a TV to the corresponding output

jacks to watch video input from these jacks.

For details, see “Connecting a TV” (page 24).

Input jacks Output jacks

HDMI IN HDMI OUT A (TV) or HDMI

OUT B/HDMI ZONE

VIDEO IN MONITOR OUT

13

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

 (power)

Turns the receiver on or sets it to the standby

mode.

Saving power in standby mode

Check that you have made the following

settings:

Set [Control for HDMI], [Remote Start],

[Bluetooth Standby], and [Quick Start/

Network Standby]* to [Off].

Turn off the power for Zone 2, Zone 3 and

HDMI zone.

HDMI OUT

Switches the output for two monitors

connected to the HDMI OUT A (TV) and HDMI

OUT B/HDMI ZONE jacks. Output is toggled

between “HDMI A”, “HDMI B”, “HDMI A+B” and

“HDMI OFF” each time the button is pressed.

Select “HDMI OFF” to turn off the output for

HDMI OUT A (TV) and HDMI OUT B/HDMI ZONE

jacks.

 Input buttons

BD/DVD, SAT/CATV, GAME, SA-CD/CD,

USB, TV, FM

Selects the input channel connected to the

device you want to use. When you press any of

the input buttons, the receiver turns on.

WATCH, LISTEN

Selects [Watch] or [Listen] on the home menu

directly. When pressing these buttons on the

Watch or Listen screen, you can move the focus

to select the input you want.

 2CH/MULTI, MOVIE, MUSIC, FRONT

SURROUND

Selects a sound field.

CUSTOM PRESET (1, 2)

Saves and recalls various settings for the

receiver. Press to select the custom preset

setting(s). Press and hold to save the current

settings to a preset.

RX/TX

Switches the [Bluetooth Mode] to [Receiver] or

[Transmitter]. (Disabled while the BLUETOOTH

function or Screen mirroring function is

activated.)

In [Receiver] mode, the receiver receives and

outputs audio from the remote device.

In [Transmitter] mode, the receiver sends audio

to the remote device.

DSD Native

Activates the DSD Native function.

 DISPLAY

Displays information on the TV screen.

AMP MENU

Displays the menu on the display panel to

operate the receiver.

BACK

Returns to the previous menu or exits a menu

or on-screen guide that is displayed on the TV

screen.

OPTIONS

Displays and selects items from the options

menus.

(enter), / / /

Press , , , to select the menu items.

Then, press

to enter the selection.

Remote control

14

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Left

STR-DN1070

4-583-748-13(1)

 HOME

Displays the home menu on the TV screen.

/ (previous/next),

 (play/pause)**,  (stop)

Skip, play, pause, stop operation.

PRESET +/–

Selects preset stations or channels.

  (volume) +**/–

Adjusts the volume level of all speakers at the

same time.

 (muting)

Turns off the sound temporarily. Press the

button again to restore the sound.

* For USA, Canadian and Oceanian models only.

** The  and

 + buttons have tactile dots. Use

the tactile dots as reference when operating the

receiver.

The above explanation is intended to serve as

examples.

Depending on the model of your connected

device, some functions explained in this section

may not work with the supplied remote control.

Note

15

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

Preparation

Installing Speakers

You can connect up to 7 speakers and 2 subwoofers to this AV receiver. Place the speakers and

subwoofers according to the speaker system of your preference.

When you connect only one surround back speaker (SB), place the surround back speaker directly behind the

listening position.

As the subwoofer (SW) does not emit highly directional signals, you can place it wherever you want.

Preparation

Location of each speaker

Note

Names and functions of speakers

Abbreviations

used in

illustrations

Speaker name Functions

FL Front left speaker

Produces stereo sounds from front left/right channel.

FR Front right speaker

CNT Center speaker Produces vocal sounds from center channel.

SL Surround left speaker

Produces sounds from surround left/right channel.

SR Surround right speaker

SBL Surround back left

speaker

Produces sounds from surround back left/right channel.

SBR Surround back right

speaker

SB Surround back speaker Produces sounds from surround back channel.

SW Subwoofer Produces LFE (low frequency effect) channel sounds and

reinforces bass parts of other channels.

LH Left front high speaker

Produces vertical sound effects from front high left/right

channel.

RH Right front high speaker

16

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Left

STR-DN1070

4-583-748-13(1)

Select the speaker pattern according to the speaker configuration which you are using.

* You can only enable the SPEAKERS ZONE 2 terminals if you set [SURROUND BACK/ZONE2 Priority] in [Speaker

Settings] to [ZONE2 Terminals], and turn on the ZONE 2 power.

** You can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have

surround back and front high speakers.

Connecting Speakers

This receiver allows you to connect up to 7.1-channel system.

The speaker layout diagram is a guide for the ideal speaker placement. You do not need to adjust

your speaker placement exactly the same as the diagram.

Before connecting cables, be sure to disconnect the AC power cord (mains lead).

Before connecting the AC power cord (mains lead), make sure that metallic wires of the speaker cables are

not touching each other between the SPEAKERS terminals.

When you connect a subwoofer with an auto standby function, turn off the function when watching movies.

If the auto standby function is set to on, it turns to standby mode automatically based on the level of the input

signal to the subwoofer, and the sound may not be output.

If you have two subwoofers, you can connect them to both SUBWOOFER OUT jacks.

Speaker configuration and speaker pattern settings

Speaker configuration in each zone

Main zone Zone 2* Zone 3 [Surround

Back

Speaker

Assign]**

[Surround

Speaker

Assign]

Speaker

pattern to

be selected

in [Speaker

Settings]

For

connection,

see page

5.1-channel Not used Not used [Off] [Off] [5.1] 17

7.1-channel

using surround

back speakers

Not used Not used [Off] [Off] [7.1] 18

7.1-channel

using front high

speakers

Not used Not used [Off] [Off] [7.1 (FH)] 19

5.1-channel with

Zone 2 speakers

2-channel Not used [Off] [Off] [5.1] 20

3.1-channel with

Zone 2 and

Zone 3

connections

2-channel 2-channel [Off] [Zone3] [3.1] 21

5.1-channel with

Bi-Amplifier

connection

Not used Not used [Bi-Amp] [Off] [5.1] 22

5.1-channel with

Front B speakers

Not used Not used [Front B] [Off] [5.1] 23

Note

17

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

Preparation

5.1-channel speaker system

Examples of speaker connections



30˚



100˚ – 120˚

Surround speakers



Monaural audio cable (not supplied)



Speaker cable (not supplied)

Front speakersSubwoofer

Center speaker

18

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Left

STR-DN1070

4-583-748-13(1)

7.1-channel speaker system using surround back speakers

* If you connect only one surround back speaker,

connect it to the L (+/–) terminals.

After you have made the connection, set

[Surround Back Speaker Assign] in [Speaker

Settings] to [Off].



30˚



100˚ – 120˚



Same angle.

Surround back speakers*

Surround speakers



Monaural audio cable (not supplied)



Speaker cable (not supplied)

Front speakersSubwoofer

Center speaker

19

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Right

STR-DN1070

4-583-748-13(1)

Preparation

7.1-channel speaker system using front high speakers

* After you have made the connection, set

[Surround Back Speaker Assign] in [Speaker

Settings] to [Off].



30˚



100˚ – 120˚

Front high speakers*

Surround speakers



Monaural audio cable (not supplied)



Speaker cable (not supplied)

Front speakersSubwoofer

Center speaker

20

GB

D:\NORM'S JOB\SONY HA\SO160008\STR-DN1070 (PMRF 02)\4583748131_GB\030CON.fm masterpage: Left

STR-DN1070

4-583-748-13(1)

5.1-channel speaker system with Zone 2 speakers

* You can only enable the SPEAKERS ZONE 2

terminals if you set [SURROUND BACK/ZONE2

Priority] in [Speaker Settings] to [ZONE2

Terminals], and turn on the ZONE 2 power.



30˚



100˚ – 120˚

Main zone Zone 2

Speakers (Zone 2)*

Surround speakers



Monaural audio cable (not supplied)



Speaker cable (not supplied)

Front speakersSubwoofer

Center speaker

Page is loading ...

Sony STR-DN1070 Operating Instructions Manual

Sony STR-DN1070 Operating Instructions Manual

Related papers

Other documents