American Standard T480.502.295 Installation guide
- Category
- Sanitary ware
- Type
- Installation guide
U.S. Patent No. D403,750
Certified to comply with ANSI A112.18.1
Installation
Instructions
TM
T480.500 SERIES
1/2" NPT
7" REF.
FINISHED WALL
BOTTOM OF TUB
74" FOR HEAD
CLEARANCE
4" REF.
5-1/8" REF.
OPTIONAL TO FINISHED
FLOOR USUALLY
BETWEEN 65'' AND 78''
TOP OF TUB RIM
1/2" COPPER
1-5/8" TO 3-1/4"
4" REF.
7-5/8" REF.
M968396 Rev. 1.2
ROUGHING-IN DIMENSIONS
To assure proper positioning in relation to wall, note
roughing-in dimensions.
BATH/SHOWER TRIM KIT
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
INSTALL TRIM
1
7
5
11
3
2
4
10
9
8
6
1
3
Remove HOT LIMIT STOP (1) and CARTRIDGE (2).
Clean inlets and MANIFOLD (4).
Reassemble CARTRIDGE (3), alternately tightening SCREWS (2).
If faucet drips, operate CARTRIDGE PIVOT (A) handle several
times from "off" to "on". Do not apply excessive force.
Clogged CARTRIDGE (3) inlets may cause reduced flow in "full
on" hot or cold. To clean inlets, first turn off water supply, then:
SERVICE
4
3
2
1
A
2
"B""A"
By restricting handle rotation and limiting the amount
of hot water allowed to mix with the cold, the HOT LIMIT
SAFETY STOP reduces risk of accidental scalding. To
set the maximum hot water temperature of your faucet,
all you need to do is adjust the setting on the HOT LIMIT
SAFETY STOP.
Remove HANDLE, CAP and HOT LIMIT STOP.
Follow "A" or "B" to adjust maximum discharge
temperature.
ADJUST HOT LIMIT STOP
ADJUSTMENT WHEN WATER IS TOO HOT
PRY UPWARD TO UNLOCK AND
ROTATE COUNTER-
CLOCKWISE ONE CLICK.
ADJUSTMENT WHEN WATER IS TOO COLD
PRY UPWARD TO UNLOCK AND
ROTATE CLOCKWISE ONE CLICK..
M968396 Rev. 1.2
4
Remove PLASTER GUARD (1).
Push CAP (2) on valve, place ESCUTCHEON (3) and attach with SCREWS (4).
Install HANDLE (5) by pushing it onto CARTRIDGE STEM (6) and tightening SET SCREW (7) from below.
Install SHOWER ARM (8) with FLANGE (9) and SHOWER HEAD (10).
Check proper operation of HANDLE (5) and DIVERTER SPOUT (11).
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
CARE INSTRUCTIONS:
Replace the "YYY" with
appropriate finish code
022650-YYY0A
DIVERTER SPOUT (Slip-on)
TM
002
299
T480.500 SERIES
078016-YYY0A
ESCUTCHEON SCREWS
M907050-YYY0A
ESCUTCHEON CAP SET
023560-YYY0A
SHOWER ARM AND FLANGE
M953588-YYY0A
SHOWER HEAD
M060327-YYY0A
LEVER HANDLE KIT
M961812-YYY0A
ESCUTCHEON AND SCREWS
030126-0070A
HANDLE SCREW KIT
CHROME
CHROME/BRASS
BATH/SHOWER TRIM KIT
M968396 Rev. 1.2
MODEL NUMBER
For toll-free information and answers to your questions, call:
1-800-442-1902
Weekdays 8:00 a.m. to 6:00 p.m. EST
IN CANADA 1-800-387-0369 (TORONTO 1-905-306-1093)
Weekdays 8:00 a.m. to 7:00 p.m. EST
IN MEXICO 01-800-839-12-00
Product names listed herein are trademarks of American Standard Inc.
© AS America, Inc. 2008
HOT LINE FOR HELP
-
1
-
2
-
3
American Standard T480.502.295 Installation guide
- Category
- Sanitary ware
- Type
- Installation guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
American Standard T373.502 User manual
-
-
-
-
-
-
-
-
-