Congratulations on your Sunforce Purchase. This product is designed to the highest technical specifications and

standards. It will supply years of maintenance free use. Please read these instructions thoroughly prior to

installation, then store in a safe place for future reference. If at any time you are unclear about this product, or

require further assistance please do not hesitate to contact our trained professionals operating the customer

support line 1-888-478-6435 or email to [email protected]

Your Solar Motion Light is the perfect system for your home and business. It is controlled by a sensor which

the Motion Detector Head (6).

• Turn the switch to “ON” position, the light can be used as a standard light for constant illumination.

HOW TO USE CONTROL DIALS

• The Solar Sensor Light has 3 different Control dials which control the light’s duration, sensitivity to light

and sensitivity to motion.

LUX (Light level)

TIME

1) The TIME Adjusting dial (13) sets the duration of illumination time

2) The TIME is adjustable from 8 seconds to 2 minutes. Rotating the dial clockwise will increase the

SENS (Sensitivity)

This determines the range of motion detection

3. Check correct Polarity of battery replacement

4. Replace the cover of the Battery Housing (5).Secure it with the four screws.

This product is covered under a one year limited warranty. Sunforce Products Inc. warrants to the original

purchaser that this product is free from defects in materieals and workmanship for the period of one year

warranty from date of purchase. To obtain warranty service please contact Sunforce Products for further

instructions, at 1 888 478-6435 or email info@sunforceproducts.com