Panasonic MC-UL423 Operating instructions

Page is loading ...

- 2 -

Division of Panasonic Corporation of North America

- 3 -

CONSUMER INFORMATION.............................................................................................................. 6

IMPORTANT SAFETY INSTRUCTIONS ............................................................................................ 9

PARTS IDENTIFICATION ................................................................................................................ 12

CONSUMABLE PARTS.................................................................................................................... 13

FEATURE CHART ............................................................................................................................ 13

ASSEMBLY ...................................................................................................................................... 14

Attaching Handle ........................................................................................................................ 14

Attaching Hose ............................................................................................................................ 16

Tool Storage ................................................................................................................................ 18

Power Cord ................................................................................................................................ 20

TO OPERATE VACUUM CLEANER ................................................................................................ 20

Power Cord .......................................................................................................................... 22, 24

On/Off Switch .............................................................................................................................. 24

Adjusting the Handle .................................................................................................................. 26

Using Tools ................................................................................................................................ 28

Tools ............................................................................................................................................ 30

FEATURES ...................................................................................................................................... 30

Edge Cleaning.............................................................................................................................. 30

Automatic Adjusting Nozzle ........................................................................................................32

Thermal Protector........................................................................................................................ 32

ROUTINE CARE OF VACUUM CLEANER .................................................................................... 34

Emptying Dust Bin ................................................................................................................ 34, 36

Cleaning Pre-Filter ...................................................................................................................... 38

Cleaning Primary Filter .............................................................................................................. 42

Replacing HEPA Media Exhaust Filter ...................................................................................... 44

Replacing Belt ...................................................................................................................... 46, 48

Cleaning Agitator ........................................................................................................................ 50

Removing Clogs .................................................................................................................... 52, 54

Cleaning Exterior and Tools ...................................................................................................... 54

BEFORE REQUESTING SERVICE.................................................................................................. 56

WARRANTY ................................................................................................................................ 60-62

NOTES ........................................................................................................................................ 66-67

WHAT TO DO WHEN SERVICE IS NEEDED .................................................................................. 68

TABLE OF CONTENTS

Page is loading ...

- 6 -

Please read IMPORTANT SAFETY INSTRUCTIONS on page 9 before

use. Read and understand all instructions.

TO OUR VALUED CUSTOMER

We are very pleased to welcome you to the Panasonic family of products. Thank you for

purchasing this product. Our intent is that you become one of our many satisfied customers.

Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your vacuum

cleaner is intended only for household use. The vacuum cleaner should be stored in a dry,

indoor area. Read the Operating Instructions carefully for important use and safety

information.

Special care is required when vacuuming certain types of carpet or floor covering. Always

check the carpet or floor covering manufacturer's recommended cleaning instructions before

vacuuming.

PLEASE PAY CLOSE ATTENTION TO ALL

WARNING AND CAUTION STATEMENTS.

WARNING

TO AVOID ELECTRICAL SHOCK

Never vacuum damp or wet surfaces or liquids.

DO NOT store vacuum cleaner outdoors.

Replace worn or frayed power cord immediately.

Unplug from outlet when not in use and before servicing.

TO AVOID ACCIDENTS

• Except for hand-held vacuum cleaners, keep vacuum cleaner on floor - not chairs, tables, steps,

stairs, etc.

• Store vacuum cleaner promptly after each use to prevent accidents such as tripping over power cord

or vacuum cleaner.

• Use vacuum cleaner and accessories only in a manner intended by the manufacturer.

• Do not use an extension cord.

• Do not pull the vacuum cleaner beyond its power cord length. The plug might be damaged which can

cause electrical sparking and fire.

CONSUMER INFORMATION

WARNING

WARNING statements are designed to alert you to

the possibility of personal injury, loss of human

life, and/or damage to the vacuum cleaner and/or

personal property if the instructions given are not

followed.

CAUTION statements are designed to alert you to

the possibility of damage to the vacuum cleaner

and/or personal property if the instructions given

are not followed.

CAUTION

Page is loading ...

- 9 -

When using your vacuum cleaner, basic precautions should always be followed,

including the following:

Read all instructions in this manual before assembling or using your vacuum

cleaner.

WARNING

To reduce the risk of fire, electrical shock, and injury:

1. Use your vacuum cleaner only as described in this manual. Use only with Panasonic

recommended attachments.

2. Disconnect electrical supply before servicing or cleaning out the brush area.

3. Do not leave vacuum cleaner when plugged in. Unplug from outlet when not in use

and before servicing.

4. To reduce the risk of electrical shock - Do not use outdoors or on wet surfaces.

5. Do not allow to be used as a toy. Close attention is necessary when used by or near

children.

6. Do not use with a damaged cord or plug. If vacuum cleaner is not working as it

should, has been dropped, damaged, left outdoors, or dropped in water, return it to a

Panasonic Service Center.

7. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord

around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord

away from heated surfaces.

8. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

9. Do not handle plug or vacuum cleaner with wet hands.

10.Do not put any objects into openings.

11. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that

may reduce air flow.

12.Keep hair, loose clothing, fingers, and all parts of body away from openings and

moving parts.

13.Turn off all controls before unplugging.

14.Use extra care when cleaning on stairs. Do not put on chairs, tables, etc. Keep on floor.

15.Do not use vacuum cleaner to pick up flammable or combustible liquids (gasoline,

cleaning fluid, perfumes, etc.), or use in areas where they may be present. The fumes

from these substances can create a fire hazard or explosion.

16.Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot

ashes.

17.Do not use vacuum cleaner without dust bin and/or filters in place.

18.You are responsible for making sure that your vacuum cleaner is not used by anyone

who is unable to operate it properly.

SAVE THESE INSTRUCTIONS

THIS VACUUM CLEANER IS INTENDED FOR HOUSEHOLD USE ONLY

NOTE: Before you plug in your Panasonic vacuum cleaner, make sure that the voltage

indicated on the rating plate located at the back of the vacuum cleaner is the same as

your local electrical supply.

IMPORTANT SAFETY INSTRUCTIONS

Page is loading ...

- 13 -

FEATURE CHART

Tableau des caractéristiques / Diagrama de características

CONSUMABLE PARTS

Pièces remplaçables / Partes consumibles

Type UB12

MC-V390B

Belt

Courroie

Correa

MC-V194H

HEPA Media Exhaust Filter

Filtre d’évacuation

Filtro de escape

MC-UL423 MC-UL423T

Power

Alimentation 120V AC (60 Hz) 120V AC (60 Hz)

Voltaje

Amps

Ampère 12.0 12.0

Amperios

Thermal Protector

Protecteur thermique Yes / Oui / Sí Yes / Oui / Sí

Protector termal

Cord Length

Longueur du cordon 7.6 m (25 ft.) 7.6 m (25 ft.)

Extensión de cordón

Tools on Board

Accessoires intégrés Yes / Oui / Sí Yes / Oui / Sí

Herramientas a bordo

Air Turbine

Turbine à air No / Non / No Yes / Oui / Sí

Turbina de aire

- 14 -

ASSEMBLY

WARNING

Electrical Shock Hazard

Do not plug into the electrical supply until the assembly is complete. Failure to do so

could result in electrical shock or injury.

➢ DO NOT plug in until assembly is

complete.

➢ Remove handle screw from handle.

➢ Insert handle with locking notch to

the back of the vacuum cleaner as

shown.

➢ Insert handle screw.

➢ Tighten handle screw.

Attaching Handle

Handle

Manche

Mango

Handle Screw

Vis du manche

Tornillo del mango

Locking Notch

Encoche de

verrou

Hendidura

de fijación

CAUTION

Do not overtighten.

Overtightening could strip the screw

holes.

Do not operate the vacuum cleaner

without the screw in place.

Page is loading ...

Attaching Hose

➢ Insert the tab on the wand into the

“J” slot on the hose. Twist the wand

to lock in place.

➢ Place the wand into the wand

holder and press firmly onto nozzle

hose.

➢ Route hose in the hose holders as

shown.

➢ Remove the hose from the nozzle

hose.

Nozzle Hose

Tuyau de tête

d’aspiration

Manguera de

la boquilla

Wand Holder

Porte-tube

Soporte

del tubo

Hose Holder

Porte-tuyau

Soporte

de la manguera

Hose Holder

Porte-tuyau

Soporte

de la manguera

Hose

Tuyau

Manguera

Nozzle Hose

Tuyau de tête

d’aspiration

Manguera de

la boquilla

“J” Slot

Fente en “J”

Ranura en "J”

Raised Tab

Saillie

Lengüeta levantada

Wand

Tube

Tubo

Hose

Tuyau

Manguera

- 16 -

Page is loading ...

Tool Storage

Dusting Brush

Cepillo para

sacudir

Brosse à

épousseter

DUSTING BRUSH

➢ Insert dusting brush into slot on the

back of the vacuum cleaner as shown.

CREVICE TOOL

➢ Insert

crevice tool into vacuum

cleaner tool holder.

Crevice Tool

Suceur plat

Herramienta

para hendiduras

Clip

Loquet

Cerrojo

Handle

Poignée

Mango

Air Turbine

Turbine à air

Turbina de aire

AIR TURBINE

(MC-UL423T only)

➢ Snap Air Turbine into clip.

- 18 -

Page is loading ...

- 20 -- 20 -

TO OPERATE VACUUM CLEANER

CAUTION

Moving parts! To reduce the risk of

personal injury, DO NOT touch the

brush when vacuum cleaner is on.

Contacting the brush while it is

rotating can cut, bruise or cause

other injuries. Always unplug from

electrical outlet before servicing.

Use caution when operating near

children.

Cord Hook

Crochet de

rangement

du cordon

Sujetador

del cordón

Cord Hook

Crochet de

rangement

du cordon

Sujetador

del cordón

Retainer

(Plug Head)

Agrafe de

fixation

de la fiche du

cordon

Clavija

Locking Notch

Encoche de

verrou

Hendidura

de fijación

Power Cord

➢ Remove twist tie.

➢ Push power cord into locking notch.

➢ Wrap power cord around cord

hooks.

➢ Secure retainer (plug head) to power

cord.

Page is loading ...

- 22 -

NOTE: To reduce the risk of electrical

shock, this vacuum cleaner has a

polarized plug, one blade is wider than

the other. This plug will fit in a

polarized outlet only one way. If the

plug does not fit fully in the outlet,

reverse the plug. If it still does not fit,

contact a qualified electrician to install

the proper outlet. DO NOT CHANGE

THE PLUG IN ANY WAY. Only use

outlets near the floor.

Power Cord

WARNING

Personal Injury and Product Damage

Hazard

• DO NOT place hands or feet under

the vacuum cleaner at any time.

• DO NOT plug in if switch is in ON

position. Personal injury or property

damage could result.

• DO NOT use outlets above coun-

ters. Damage from cord to items in

surrounding area could occur.

• When any abnormality/failure

occurs, stop using the product

immediately and disconnect the

power plug.

Page is loading ...

- 24 -

Cord Hook

Crochet de

rangement

du cordon

Sujetador

del cordón

Retainer

(Plug Head)

Agrafe de

fixation

de la fiche du

cordon

Clavija

➢ Detach plug head from power cord.

➢ Rotate cord hook down to release

cord.

➢ Plug cord into 120-volt outlet

located near the floor.

➢ Return the cord hook to the upright

position before attempting to rewind

the cord.

➢ To turn vacuum cleaner on or off,

press on the on/off switch.

On/Off Switch

Interrupteur

Interruptor de

encendido-apagado

Page is loading ...

- 26 -

Adjusting the Handle

➢ Step on nozzle top and pull back to

change handle position.

➢ Use low position for cleaning under

furniture.

➢ Step on nozzle top and pull back to

change from normal use position to

low position.

➢ Move vacuum cleaner to middle

position for normal use.

➢ Move vacuum cleaner to upright

position for storage and tool use.

Page is loading ...

NOTE: Hold the handle to support the

vacuum cleaner when using tools and

disconnecting or attaching the hose.

➢ Disconnect the hose & wand from

the vacuum cleaner.

➢ Pull the wand gently in the direction

of the arrow to disconnect.

➢ It may be necessary to slightly twist

the hose handle to loosen from the

nozzle hose.

➢ Attach crevice tool or dusting brush

as needed.

➢ Crevice tool, dusting brush or air

turbine (MC-UL423T only) can attach

to either wand or hose.

➢ For additional reach, the dusting

brush may be attached to the end of

the crevice tool.

Wand

Tube

Tubo

Hose

Tuyau

Manguera

Nozzle Hose

Tuyau de tête

d’aspiration

Manguera de

la boquilla

CAUTION

• DO NOT overextend your reach with

hose as it could tip vacuum cleaner.

Wand

Tube

Tubo

Dusting Brush

Brosse à épousseter

Cepillo para sacudir

Air Turbine

(MC-UL423T)

Turbine à air

Turbina de aire

Crevice Tool

Suceur plat

Herramienta para

hendiduras

Using Tools

- 28 -

CAUTION

• Agitator rotates when using tools,

use care to ensure that nothing

comes into contact with agitator.

Page is loading ...

- 30 -

Tools

➢ The crevice tool may be used on the

following items:

• Furniture

• Cushions

• Drapes

• Stairs

• Walls

➢ The dusting brush may be used on

the following items:

• Furniture

• Drapes

• Stairs

• Walls

FEATURES

Edge Cleaning

This model is equipped with an edge

cleaning feature for cleaning carpet

edges near baseboards and stationary

furniture.

Note: Always clean tools before using.

➢ The air turbine may be used on the

following items:

• Furniture

• Stairs

➢ Operating instructions for the air

turbine are included with the

product.

(MC-UL423T only)

(MC-UL423T seulement)

(MC-UL423T solamente)

Page is loading ...

- 32 -

Automatic Adjusting Nozzle

➢ The nozzle of your Panasonic

vacuum cleaner automatically

adjusts to any carpet pile height.

➢ Feature allows nozzle to float evenly

over carpet pile surfaces.

➢ No manual adjustments required.

Shallow Pile Carpet

Moquette à poils courts

Alfombra de pelo corto

Deep Pile Carpet

Moquette à

poils longs

Alfombra de

pelo largo

Nozzle

Tête

d'aspiration

Boquilla

Pivot Point

Point d’articulation

Botón de liberación

➢ This vacuum cleaner has a thermal protector which automatically trips to protect

the vacuum cleaner from overheating.

➢ If a clog prevents the normal flow of air to the motor, the thermal protector turns

the motor off automatically. This allows the motor to cool in order to prevent

possible damage to the vacuum cleaner.

TO CORRECT PROBLEM:

➢ Turn the vacuum cleaner off and unplug the power cord from the outlet to allow

the vacuum cleaner to cool and the thermal protector to reset.

➢ Check for and remove clogs, if necessary (See REMOVING CLOGS p. 52, 54).

Also check and replace any clogged filters and empty dust bin, if necessary.

➢ Wait approximately fifty (50) minutes and then plug the vacuum cleaner in and

turn back on to see if the motor protector has reset.

Thermal Protector

Page is loading ...

- 34 -

ROUTINE CARE OF VACUUM CLEANER

Performing the tasks in the following sections will keep your new Panasonic vacuum cleaner

operating at peak performance levels and will ensure these high levels for years to come.

Check the BEFORE REQUESTING SERVICE section in this manual for recommendations on

performing some of these tasks to help solve various problems that may occur.

WARNING Electrical Shock or Personal Injury Hazard

Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.

Failure to do so could result in electrical shock or personal injury from vacuum

cleaner suddenly starting.

Emptying Dust Bin

➢ Always empty the dust bin when

dirt level reaches the “MAX” line.

➢ Grasp the handle on the top of the

dust bin.

➢

Press the dust bin release button

➢ Lift up and out to remove dust bin

from vacuum cleaner.

Dust Bin

Release Button

Bouton de

dégagement

du godet à

poussière

Botón de

liberación

del contenedor

de basura

MAX

M

AX

“MAX” Line

Ligne « MAX »

Linea “MAX”

Page is loading ...

➢ While holding the dust bin over a

trash container, press dust bin door

latch and the debris will fall out.

➢ Remove any clogs that might be

located in the pre-filter. (See

CLEANING PRE-FILTER, p. 38, 40)

➢ Shake the dust bin to release any

debris that might hang in the pre-

filter

TO REPLACE DUST BIN

➢ After the dust bin is empty of

debris, firmly close the door. Make

sure you hear a “click” sound to

indicate that the door is fully

latched.

Door Latch

Loquet du couvercle

Seguro de la puerta

Door

Couvercle

Puerta

- 36 -

CAUTION

Be sure to hold the dust bin over a

proper trash container prior to

releasing the door of the dust bin.

➢ Place dust bin back into vacuum

cleaner by inserting the bottom first

and tilting back.

➢ Push forward and lower dust bin

handle to lock dust bin in place.

Page is loading ...

- 38 -

Cleaning Pre-Filter

➢ Make sure the dust bin is empty.

➢ Rotate dust bin lid assembly to

unlock (as indicated on the lid), and

lift off.

LOCKED (For Use)

VERROUILLÉ (pour l'utilisation)

CERRADO (Para Usar)

UNLOCKED (For Cleaning)

DÉVERROUILLÉ (pour le nettoyage)

ABIERTO (Para Vaciar)

➢ Grasp pre-filter and rotate counter-

clockwise to remove.

➢ Clean pre-filter by gently tapping

over a trash container.

➢ Rinse with water only as needed, do

not use any detergent or soap.

➢ Allow pre-filter to dry for 24 hours

before placing back into vacuum

cleaner.

UNLOCKED (For cleaning)

DÉVERROUILLÉ

(pour le nettoyage)

ABIERTO (Para vaciar)

Page is loading ...

- 40 -

To Reinstall:

➢ Align the slot on the pre-filter with

the alignment tab inside dust bin.

➢ Rotate pre-filter clockwise to lock in

place.

➢ Reinstall dust bin lid and turn to

locked position (as indicated on the

lid).

LOCKED (For Use)

VERROUILLÉ (pour l'utilisation)

CERRADO (Para Usar)

LOCKED (For Use)

VERROUILLÉ (pour l'utilisation)

CERRADO (Para Usar)

UNLOCKED (For Cleaning)

DÉVERROUILLÉ (pour le nettoyage)

ABIERTO (Para Vaciar)

Page is loading ...

- 42 -

Cleaning Primary Filter

Dust Bin Lid Latch

Loquet du couvercle

du godet à poussière

Cierre de tapa del

contenador de

basura

Dust Bin Lid

Couvercle du

godet à poussière

Tapa del

contenador de

basura

Primary Filter

Filtre primaire

Filtro primario

It is recommended to clean the filter

with cold water at least every three (3)

months. Check the primary filter

frequently and clean when dirty.

➢ Turn off and unplug the vacuum

cleaner.

➢ Remove dust bin (See EMPTYING

DUST BIN, p. 34).

➢ Pull the dust bin lid latch and open

the lid.

➢ Remove the primary filter.

➢ Wash with cold water only, DO NOT

use detergent or soap.

➢ Once the filter is washed clean,

squeeze by hand and allow to air

dry.

➢ Allow filter to dry for 24 hours

before placing back into vacuum

cleaner.

NOTE: When the cleaning of the filter

no longer restores vacuum cleaner

suction to full power, replace the filter.

DO NOT operate without primary filter

installed.

DO NOT wash in the dishwasher.

DO NOT install damp.

Primary Filter

Filtre primaire

Filtro primario

TO REPLACE FILTER

➢ Place the primary filter into the dust

bin lid.

➢ Close the dust bin lid. Be sure the

lid snaps in place. A noticeable

“click” should be heard.

➢ Reinstall the dust bin into the

vacuum cleaner (See EMPTYING

DUST BIN, p. 36).

Page is loading ...

Panasonic MC-UL423 Operating instructions

Panasonic MC-UL423 Operating instructions

in other languages

Related papers

Other documents