Panasonic MC-UL425 User manual

Category
Vacuum cleaners
Type
User manual
- 2 -
© 2012 Panasonic Appliances Company of America,
Division of Panasonic Corporation of North America
All rights reserved / Tous droits réservés / Todos los derechos están reservados
- 3 -
CONSUMER INFORMATION.............................................................................................................. 6
IMPORTANT SAFETY INSTRUCTIONS ............................................................................................9
PARTS IDENTIFICATION ..................................................................................................................12
CONSUMABLE PARTS ....................................................................................................................13
FEATURE CHART ............................................................................................................................13
ASSEMBLY ...................................................................................................................................... 14
Attaching Handle ........................................................................................................................ 14
Attaching Hose ............................................................................................................................ 16
Tool Storage ................................................................................................................................ 18
TO OPERATE VACUUM CLEANER ................................................................................................ 20
Power Cord ................................................................................................................................ 20
Cord Reel .................................................................................................................................... 22
On/Off Switch .............................................................................................................................. 22
Adjusting the Handle .................................................................................................................. 24
Using Tools ................................................................................................................................ 26
Tools ..............................................................................................................................................28
FEATURES ...................................................................................................................................... 28
Edge Cleaning.............................................................................................................................. 28
Automatic Adjusting Nozzle ........................................................................................................30
Thermal Protector........................................................................................................................ 30
ROUTINE CARE OF VACUUM CLEANER .................................................................................... 32
Emptying Dust Bin ................................................................................................................ 32, 34
Cleaning Pre-Filter ................................................................................................................ 36, 38
Cleaning Primary Filter .............................................................................................................. 40
Replacing HEPA Media Exhaust Filter ...................................................................................... 42
Replacing Belt ...................................................................................................................... 44, 46
Cleaning Agitator ........................................................................................................................ 48
Removing Clogs .................................................................................................................... 50, 52
Cleaning Exterior and Tools ...................................................................................................... 52
BEFORE REQUESTING SERVICE.................................................................................................. 54
WARRANTY .......................................................................................................................... 58-59, 60
WHAT TO DO WHEN SERVICE IS NEEDED .................................................................................. 64
TABLE OF CONTENTS
- 6 -
Please read IMPORTANT SAFETY INSTRUCTIONS on page 9 before
use. Read and understand all instructions.
TO OUR VALUED CUSTOMER
We are very pleased to welcome you to the Panasonic family of products. Thank you for
purchasing this product. Our intent is that you become one of our many satisfied customers.
Proper assembly and safe use of your vacuum cleaner are your responsibilities. Your vacuum
cleaner is intended only for household use. The vacuum cleaner should be stored in a dry,
indoor area. Read the Operating Instructions carefully for important use and safety
information.
Special care is required when vacuuming certain types of carpet or floor covering. Always
check the carpet or floor covering manufacturer's recommended cleaning instructions before
vacuuming.
PLEASE PAY CLOSE ATTENTION TO ALL
WARNING AND CAUTION STATEMENTS.
WARNING
TO AVOID ELECTRICAL SHOCK
Never vacuum damp or wet surfaces or liquids.
DO NOT store vacuum cleaner outdoors.
Replace worn or frayed power cord immediately.
Unplug from outlet when not in use and before servicing.
TO AVOID ACCIDENTS
Except for hand-held vacuum cleaners, keep vacuum cleaner on floor - not chairs, tables, steps,
stairs, etc.
Store vacuum cleaner promptly after each use to prevent accidents such as tripping over power cord
or vacuum cleaner.
Use vacuum cleaner and accessories only in a manner intended by the manufacturer.
Do not use an extension cord.
Do not pull the vacuum cleaner beyond its power cord length. The plug might be damaged which can
cause electrical sparking and fire.
CONSUMER INFORMATION
WARNING
WARNING statements are designed to alert you to
the possibility of personal injury, loss of human
life, and/or damage to the vacuum cleaner and/or
personal property if the instructions given are not
followed.
CAUTION statements are designed to alert you to
the possibility of damage to the vacuum cleaner
and/or personal property if the instructions given
are not followed.
CAUTION
- 9 -
When using your vacuum cleaner, basic precautions should always be followed,
including the following:
Read all instructions in this manual before assembling or using your vacuum
cleaner.
WARNING
To reduce the risk of fire, electrical shock, and injury:
1. Use your vacuum cleaner only as described in this manual. Use only with Panasonic
recommended attachments.
2. Disconnect electrical supply before servicing or cleaning out the brush area.
3. Do not leave vacuum cleaner when plugged in. Unplug from outlet when not in use
and before servicing.
4. To reduce the risk of electrical shock - Do not use outdoors or on wet surfaces.
5. Do not allow to be used as a toy. Close attention is necessary when used by or near
children.
6. Do not use with a damaged cord or plug. If vacuum cleaner is not working as it
should, has been dropped, damaged, left outdoors, or dropped in water, return it to a
Panasonic Service Center.
7. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord
around sharp edges or corners. Do not run vacuum cleaner over cord. Keep cord
away from heated surfaces.
8. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
9. Do not handle plug or vacuum cleaner with wet hands.
10.Do not put any objects into openings.
11. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that
may reduce air flow.
12.Keep hair, loose clothing, fingers, and all parts of body away from openings and
moving parts.
13.Turn off all controls before unplugging.
14.Use extra care when cleaning on stairs. Do not put on chairs, tables, etc. Keep on floor.
15.Do not use vacuum cleaner to pick up flammable or combustible liquids (gasoline,
cleaning fluid, perfumes, etc.), or use in areas where they may be present. The fumes
from these substances can create a fire hazard or explosion.
16.Do not pick up anything that is burning or smoking, such as cigarettes, matches, or hot
ashes.
17.Do not use vacuum cleaner without dust bin and/or filters in place.
18.Unplug before connecting air turbine (if applicable).
19. Hold plug when rewinding onto cord reel. DO NOT allow plug to whip when rewinding.
20.You are responsible for making sure that your vacuum cleaner is not used by anyone
who is unable to operate it properly.
SAVE THESE INSTRUCTIONS
THIS VACUUM CLEANER IS INTENDED FOR HOUSEHOLD USE ONLY
NOTE: Before you plug in your Panasonic vacuum cleaner, make sure that the voltage
indicated on the rating plate located at the back of the vacuum cleaner is the same as
your local electrical supply.
IMPORTANT SAFETY INSTRUCTIONS
- 14 -
ASSEMBLY
WARNING
Electrical Shock Hazard
Do not plug into the electrical supply until the assembly is complete. Failure to do so
could result in electrical shock or injury.
DO NOT plug in until assembly is
complete.
Remove handle screw from handle.
Insert handle with locking notch to
the back of the vacuum cleaner as
shown.
Insert handle screw.
Tighten handle screw.
Attaching Handle
Handle
Manche
Mango
Handle Screw
Vis du manche
Tornillo del mango
Locking Notch
Encoche de
verrou
Hendidura
de fijación
CAUTION
Do not overtighten.
Overtightening could strip the screw
holes.
Do not operate the vacuum cleaner
without the screw in place.
Attaching Hose
Insert the tab on the wand into the
“J” slot on the hose. Twist the wand
to lock in place.
Place the wand into the wand
holder and press firmly onto nozzle
hose.
Route hose in the hose holders as
shown.
Remove the hose from the nozzle
hose.
Nozzle Hose
Tuyau de tête
d’aspiration
Manguera de
la boquilla
Wand Holder
Porte-tube
Soporte
del tubo
Hose Holder
Porte-tuyau
Soporte
de la manguera
Hose Holder
Porte-tuyau
Soporte
de la manguera
Hose
Tuyau
Manguera
Nozzle Hose
Tuyau de tête
d’aspiration
Manguera de
la boquilla
“J” Slot
Fente en “J”
Ranura en "J”
Raised Tab
Saillie
Lengüeta levantada
Wand
Tube
Tubo
Hose
Tuyau
Manguera
- 16 -
Tool Storage
Dusting Brush
Cepillo para
sacudir
Brosse à
épousseter
DUSTING BRUSH
Insert dusting brush into slot on the
back of the vacuum cleaner as shown.
CREVICE TOOL
Insert
crevice tool into vacuum
cleaner tool holder.
Crevice Tool
Suceur plat
Herramienta
para hendiduras
Clip
Loquet
Cerrojo
Handle
Poignée
Mango
Air Turbine
Turbine à air
Turbina de aire
- 18 -
AIR TURBINE
Set the bottom of the air turbine into
the caddy and rotate until air turbine
snaps into clip.
- 20 -- 20 -
TO OPERATE VACUUM CLEANER
CAUTION
Moving parts! To reduce the risk of
personal injury, DO NOT touch the
brush when vacuum cleaner is on.
Contacting the brush while it is
rotating can cut, bruise or cause
other injuries. Always unplug from
electrical outlet before servicing.
Use caution when operating near
children.
NOTE: To reduce the risk of electrical
shock, this vacuum cleaner has a
polarized plug, one blade is wider than
the other. This plug will fit in a
polarized outlet only one way. If the
plug does not fit fully in the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. DO NOT CHANGE
THE PLUG IN ANY WAY. Only use
outlets near the floor.
Power Cord
WARNING
Personal Injury and Product Damage
Hazard
• DO NOT place hands or feet under
the vacuum cleaner at any time.
• DO NOT plug in if switch is in ON
position. Personal injury or property
damage could result.
• The cord moves rapidly when
rewinding. Keep children away and
provide a clear path when rewinding
the cord to prevent personal injury.
• DO NOT use outlets above coun-
ters. Damage from cord to items in
surrounding area could occur.
• When any abnormality/failure
occurs, stop using the product
immediately and disconnect the
power plug.
On/Off Switch
Interrupteur
Interruptor de
encendido-apagado
Handle
Poignée
Mango
Locking Notch
Encoche de
verrou
Hendidura
de fijación
To turn vacuum cleaner on or off,
press on the on/off switch.
On/Off Switch
Pull power cord out of vacuum
cleaner to desired length.
Plug the polarized power cord into
a 120 Volt outlet located near the
floor.
Make sure the power cord is placed
into the cord clip as shown.
To Rewind:
Turn off and unplug the vacuum
cleaner.
Hold the plug while rewinding to
prevent damage or injury from the
moving cord.
Press the cord release button
allowing cord reel to retract.
Cord Reel
- 22 -
- 24 -
Adjusting the Handle
Step on nozzle top and pull back to
change handle position.
Use low position for cleaning under
furniture.
Step on nozzle top and pull back to
change from normal use position to
low position.
Move vacuum cleaner to middle
position for normal use.
Move vacuum cleaner to upright
position for storage and tool use.
NOTE: Hold the handle to support the
vacuum cleaner when using tools and
disconnecting or attaching the hose.
Disconnect the hose & wand from
the vacuum cleaner.
Pull the wand gently in the direction
of the arrow to disconnect.
It may be necessary to slightly twist
the hose handle to loosen from the
nozzle hose.
Attach crevice tool or dusting brush
as needed.
Crevice tool, dusting brush or air
turbine can attach to either wand or
hose.
For additional reach, the dusting
brush may be attached to the end of
the crevice tool.
Wand
Tube
Tubo
Hose
Tuyau
Manguera
Nozzle Hose
Tuyau de tête
d’aspiration
Manguera de
la boquilla
CAUTION
DO NOT overextend your reach with
hose as it could tip vacuum cleaner.
Wand
Tube
Tubo
Dusting Brush
Brosse à épousseter
Cepillo para sacudir
Air Turbine
Turbine à air
Turbina de aire
Crevice Tool
Suceur plat
Herramienta para
hendiduras
Using Tools
- 26 -
CAUTION
Agitator rotates when using tools,
use care to ensure that nothing
comes into contact with agitator.
- 28 -
Tools
The crevice tool may be used on the
following items:
Furniture
Cushions
Drapes
Stairs
Walls
The dusting brush may be used on
the following items:
Furniture
Drapes
Stairs
Walls
FEATURES
Edge Cleaning
This model is equipped with an edge
cleaning feature for cleaning carpet
edges near baseboards and stationary
furniture.
Note: Always clean tools before using.
The air turbine may be used on the
following items:
Furniture
Stairs
Operating instructions for the air
turbine are included with the
product.
- 30 -
This vacuum cleaner has a thermal protector which automatically trips to protect
the vacuum cleaner from overheating.
If a clog prevents the normal flow of air to the motor, the thermal protector turns
the motor off automatically. This allows the motor to cool in order to prevent
possible damage to the vacuum cleaner.
TO CORRECT PROBLEM:
Turn the vacuum cleaner off and unplug the power cord from the outlet to allow
the vacuum cleaner to cool and the thermal protector to reset.
Check for and remove clogs, if necessary (See REMOVING CLOGS p. 50, 52).
Also check and replace any clogged filters and empty dust bin, if necessary.
Wait approximately fifty (50) minutes and then plug the vacuum cleaner in and
turn back on to see if the motor protector has reset.
Thermal Protector
Automatic Adjusting Nozzle
The nozzle of your Panasonic
vacuum cleaner automatically
adjusts to any carpet pile height.
Feature allows nozzle to float evenly
over carpet pile surfaces.
No manual adjustments required.
- 32 -
ROUTINE CARE OF VACUUM CLEANER
Performing the tasks in the following sections will keep your new Panasonic vacuum cleaner
operating at peak performance levels and will ensure these high levels for years to come.
Check the BEFORE REQUESTING SERVICE section in this manual for recommendations on
performing some of these tasks to help solve various problems that may occur.
WARNING Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner.
Failure to do so could result in electrical shock or personal injury from vacuum
cleaner suddenly starting.
Emptying Dust Bin
Always empty the dust bin when
dirt level reaches the “MAX” line.
Grasp the handle on the top of the
dust bin.
Press the dust bin release button
Lift up and out to remove dust bin
from vacuum cleaner.
Dust Bin
Release Button
Bouton de
dégagement
du godet à
poussière
Botón de
liberación
del contenedor
de polvo
MAX
MAX
“MAX” Line
Ligne « MAX »
Linea “MAX”
CAUTION
Be sure to hold the dust bin over a
proper trash container prior to
releasing the door of the dust bin.
Press dust bin lid release and the
dust bin will open and the debris
will fall out.
Remove any clogs that might be
located in the pre-filter. (See
CLEANING PRE-FILTER, p. 36, 38)
Shake the dust bin to release any
debris that might hang in the pre-
filter
TO REPLACE DUST BIN
After the dust bin is empty of
debris, firmly close the door. Make
sure you hear a “click” sound to
indicate that the door is fully
latched.
Door Latch
Loquet du couvercle
Seguro de la puerta
Door
Couvercle
Puerta
- 34 -
Place dust bin back into vacuum
cleaner by inserting the bottom first
and tilting back.
Push forward and lower dust bin
handle to lock dust bin in place.
- 36 -
Cleaning Pre-Filter
Make sure the dust bin is empty.
Rotate dust bin lid assembly to
unlock (as indicated on the lid), and
lift off.
LOCKED (For Use)
VERROUILLÉ (pour l'utilisation)
CERRADO (Para Usar)
UNLOCKED (For Cleaning)
DÉVERROUILLÉ (pour le nettoyage)
ABIERTO (Para Vaciar)
Grasp pre-filter and rotate counter-
clockwise to remove.
Clean pre-filter by gently tapping
over a trash container.
Rinse with water only as needed, do
not use any detergent or soap.
Allow pre-filter to dry for 24 hours
before placing back into vacuum
cleaner.
UNLOCKED (For cleaning)
DÉVERROUILLÉ
(pour le nettoyage)
ABIERTO (Para vaciar)
- 38 -
To Reinstall:
Align the slot on the pre-filter with
the alignment tab inside dust bin.
Rotate pre-filter clockwise to lock in
place.
Reinstall dust bin lid and turn to
locked position (as indicated on the
lid).
LOCKED (For Use)
VERROUILLÉ (pour l'utilisation)
CERRADO (Para Usar)
LOCKED (For Use)
VERROUILLÉ (pour l'utilisation)
CERRADO (Para Usar)
UNLOCKED (For Cleaning)
DÉVERROUILLÉ (pour le nettoyage)
ABIERTO (Para Vaciar)
- 40 -
Cleaning Primary Filter
Dust Bin Lid Latch
Loquet du couvercle
du godet à poussière
Cierre de
Dust bin
lid latch
tapa del
compartimiento
de polvo
Dust Bin Lid
Couvercle du
godet à poussière
Tapa del
compartimiento
de polvo
Primary Filter
Filtre primaire
Filtro primario
It is recommended to clean the filter
with cold water at least every three (3)
months. Check the primary filter
frequently and clean when dirty.
Turn off and unplug the vacuum
cleaner.
Remove dust bin (See EMPTYING
DUST BIN, p. 34).
Pull the dust bin lid latch and open
the lid.
Remove the primary filter.
Wash with cold water only, DO NOT
use detergent or soap.
Once the filter is washed clean,
squeeze by hand and allow to air
dry.
Allow filter to dry for 24 hours
before placing back into vacuum
cleaner.
NOTE: When the cleaning of the filter
no longer restores vacuum cleaner
suction to full power, replace the filter.
DO NOT operate without primary filter
installed.
DO NOT wash in the dishwasher.
DO NOT install damp.
Primary Filter
Filtre primaire
Filtro primario
TO REPLACE FILTER
Place the primary filter into the dust
bin lid.
Close the dust bin lid. Be sure the
lid snaps in place. A noticeable
“click” should be heard.
Reinstall the dust bin into the
vacuum cleaner (See EMPTYING
DUST BIN, p. 36).
- 42 -
Replacing HEPA Media Exhaust Filter
The HEPA media exhaust filter
removes dirt from exhaust air. Check
filter after emptying dust bin. Replace
when dirty.
Filter cannot be cleaned and should be
replaced at least once each year. Part
Number: MC-V194H
Turn off and unplug the vacuum
cleaner.
Press latch to remove exhaust filter
cover.
Grasp the exhaust filter and pull out
to remove.
Place the new filter into the vacuum
cleaner with the foam seal down.
Be sure air flow arrow on filter is
pointing upward.
Reinstall the exhaust filter cover by
inserting the tab into the slot in the
vacuum cleaner. Press firmly to
snap exhaust filter cover into place.
Air Flow
Exhaust Filter
Filtre d’évacuation
Filtre de salida
- 44 -
Replacing Belt
Replace belt whenever a burning
rubber smell caused by excessive
slippage occurs.
Turn off and unplug the vacuum
cleaner.
Lay unit on floor bottom up with
nozzle flat.
Remove nozzle hose from body by
(1) pressing in locking tab and (2)
sliding up and out of retaining slot
(see REMOVING CLOGS, p. 52).
Remove the four screws from the
nozzle cover. Next place the
vacuum in the upright position
standing on the handle. This will
minimize wheel interference when
removing nozzle bottom plate.
Remove nozzle bottom plate by
rotating upward.
CAUTION
Motor shaft may be hot.
Lay unit on floor bottom up with
nozzle flat.
Remove agitator by carefully lifting
out.
Remove worn or broken belt.
Clean agitator and the end caps
(see CLEANING AGITATOR, p. 48).
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64

Panasonic MC-UL425 User manual

Category
Vacuum cleaners
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI