(Not Included)
E-commerce Division - Enitial Lab
Page 1 of 14
18-08-06
FGI-1868C2
Page 2 of 14
Page 3 of 14
Page 4 of 14
Page 5 of 14
Page 6 of 14
Bath Cabinet
MODEL #FGI-1868C2
Get Ready
Please group boards as below
Page 7 of 14
Page 08 of 14
Apply a dab of glue into dowel
holes of the panels before
inserting dowels (#3).
Magnet facing outwards.
Page 09 of 14
Refer to page 5 on how to secure cam locks (#2)
onto cam bolts (#1).
Page 10 of 14
Page 11 of 14
Page 12 of 14
Page 13 of 14
Insert shelf pins (#10) to the desired
height of the shelf (#G).
*Have two people to help with this step!
*Make sure the screws on glass holder (#7)
is very loose.
1) Have a person insert and hold the
glass holders (#7) in place onto the
unit, then the second person slide the
glass (#J) onto the glass holders (#7).
Have the second person tighten the
glass holders (#7) onto the glass (#J).
2) Stick the sponge (#8) onto the top
middle of the glass (#J), then attach
metal push piece (#8) onto the sponge.
Page 14 of 14
/
