Page is loading ...
makitatools.com
FASTER METAL CUTTING
PADDLE SWITCH AND VARIABLE SPEED DIAL FOR OPERATOR CONVENIENCE
• Powerful 13.0 AMP motor delivers more output and variable
(2,800 - 10,500) RPM for the most demanding applications
• SJS™ technology is a mechanical clutch system that helps prevent motor and
gear damage by allowing the drive shaft to slip if the wheel is forced to stop
• Variable speed control dial enables user to match the speed to the application
• Electronic controller provides constant speed control which automatically
applies additional power to the motor to maintain speed under load
Labyrinth construction, zig-zag
varnish and thicker coil
wires for longer tool life
DURABILITY
Variable speed control dial
enables user to match the
speed to the application
VERSATILITY
SJS™ technology is a mechanical
clutch system that helps prevent
motor and gear damage
PERFORMANCE
13 AMP motor delivers
2,800 - 10,500 RPM
POWER
5" SJS
™
High-Power
Paddle Switch Angle Grinder
Models 9565PCV
makitatools.com
5" SJS
™
High-Power Paddle Switch Angle Grinder
FEATURES & BENEFITS
Makita offers a wide variety of accessories. For a complete
listing, please refer to the Makita General Catalog or visit
our website at makitatools.com, or call 1-800-4MAKITA.
All specifi cations subject to change without prior notice. All models and accessories subject to stock on hand.
The Makita Teal Color is the trade dress of Makita Corporation and is protected under common law and registered with the U.S. Patent and Trademark Offi ce
NTF-0315 MA-5054-15
n Electronic controller provides soft-start which
is designed to suppress start-up reaction for
smooth start-ups and longer gear life
n Electronic controller provides an electronic
current limiter which helps protect the motor
from overload in high torque applications
n Labyrinth construction seals and protects the motor
and bearings from dust and debris for longer tool life
n Refi ned design at only 5.3 lbs. for reduced operator fatigue
n Large paddle switch with lock-off for comfortable operation
n “Tool-less” wheel guard adjustment for easy adjustment
n Compact design at only 12-1/8" long
Model 9565PCV
088381 08517 5
Model 9565PCV
OPTIONAL ACCESSORIES
n 5" x 1/4" x 7/8" INOX grinding wheel
(1 pk. A-95962), (5 pk. A-95962-5), (25 pk. A-95962-25)
n 5" x 1/4" x 5/8"-11 INOX grinding wheel
(1 pk. A-95990), (5 pk. A-95990-5), (25 pk. A-95990-25)
n 5" Diamond Blade Turbo,
General Purpose (A-94568)
n
5" Diamond Blade Turbo,
Hard (A-94605)
STANDARD EQUIPMENT
n 5" x 1/4" x 7/8" INOX Grinding Wheel, 36 Grit (A-95962)
n Side handle (153489-2)
n 5" Tool-less Wheel Guard (135108-2)
n Inner Flange (224399-1)
n
Lock Nut (193465-4)
n
Lock Nut Wrench (782412-6)
SPECIFICATIONS
Cut-Off Wheel 5"
Wire Cup Brush 3-1/2"
No Load Speed (variable speed) 10,500 RPM
Spindle thread 5/8"-11 UNC
AMPS 13
Lock-On No
Lock-Off Yes
Overall Length 12-1/8"
Net weight 5.3 lbs.
UPC Code 088381-085175
/