FLIR M1644K84 User guide

Brand: FLIR

Model: M1644K84

Category: Digital Video Recorders (DVR)

Type: User guide

This manual is also suitable for

Information in this document is subject to change without notice. As our products are subject

to continuous improvement, FLIR Systems, Inc. and our subsidiaries reserve the right to modify

product design, speciﬁcations and prices, without notice and without incurring any obligation.

Package Contents:

Connecting Your System

8MP MPX Multiformat Digital Video Surveillance Recorder

M6100 Series

Quick Connection Guide

Cameras** Monitor* Router* Mouse

Extension Cable*

The extension cable must

be a single stretch of cable

between the DVR and camera.

You cannot connect multiple

extension cables to each other.

Power

M6100_SERIES_QCG_EN_R2

3 4 5

This system features automatic ﬁrmware

upgrades for enhanced functionality. It is

required to upgrade your system to the latest

ﬁrmware version.

If a ﬁrmware upgrade is available:

1. After startup, a notiﬁcation will appear

asking you to upgrade the ﬁrmware. Click OK to

upgrade.

2. The system will download and install the

ﬁrmware upgrade. Wait for the ﬁrmware update

to complete. The system may restart during the

ﬁrmware upgrade process.

DO NOT power off or disconnect the power

cable during ﬁrmware installation.

*Not included / sold separately.

**Cameras are included only with bundled systems. Stand-alone systems do not include cameras.

8 channel conﬁguration shown. 16 channel will have the respective number of video inputs.

For camera compatibility information, visit ﬂir.com/security/pro.

Product image might appear different than the actual product.

The DVR is set to 1080p

output by default. To

optimize picture quality,

set the DVR’s video

output to match the

resolution of your monitor.

MPX DVR

Quick Start Guides

USB Mouse

Power Cable

Remote Control

Ethernet Cable HDMI Cable

Need Help?

Visit us online for up-to-date software and

complete instruction manuals

Click on the Downloads tab

Visit ﬂir.com/security/pro

Search for the model number

of your product

Click on your product in the

search results

6: ON

Supports

up to 1080p

Supports

up to 4K

ORHDMI VGA*

Setting the Date and Time

M6100_SERIES_QCG_EN_R2

1. In live view, right-click and click Main Menu.

In live view, right-click and click Main Menu.

1. In live view, right-click and click Main Menu.

2. Log in using the system user name (default: admin) and your new, secure password.

and your new, secure password.

2. Log in using the system user name (default: admin) and

your new, secure password.

3. Click and select Cable Type.

4. Use the check boxes to select the IP channels you would

like to add.

4. Click Add IP CAM.

5. Click OK. Your system will restart and the additional IP

camera channels will be enabled.

5. Click Apply > OK. Your system will restart and the IP

channels will be enabled.

Enter the current time and

select your time zone, and click

OK.

It is important to set the correct time to ensure accurate time stamps on video recordings.

Check DST to enable auto

Daylight Savings Time updates.

(Optional) Check NTP to sync

your system with an Internet

time server. Click Manual

Update to instantly update the

time.

NOTE: A constant Internet

connection is required to use

NTP.

3. Click and select Setting.

4. Click General and select the Date&Time tab.

5. Click Apply to save changes.

Quick Access to System Information

To quickly open a window that displays vital system information such as device ID, ﬁrmware version and

device IP address:

• Press the ENTER button on the front panel.

• Right-click to open the Quick Menu and click Info. If prompted, enter the system user name

(default: admin) and your new, secure password.

Playback and SearchAdding Cameras from the LAN

Enabling Additional IP Channels

1. From live view, right-click and then click Playback.

2. Log in using the system user name (default: admin) and your new, secure password.

3. Use the calendar on the right to select the date to playback.

4. Use the drop-down menus to select the channels you would like to playback. Click the display

options (

) to playback multiple channels simultaneously.

5. Click inside the video bar to select the playback time. Playback starts immediately at the

selected time.

In addition to the analog channels available on the

M6100 DVR, the 8-channel and 16-channel models

can accommodate additional IP camera channels.

See table for available channels for each DVR model.

*IP cameras can also replace SD / HD analog channels.

Prior to adding an IP camera, you must change the Cable Type to IP for at least one channel OR enable the

additional IP camera channels (see Enabling Additional IP Channels).

Changing the cable type to IP:

Adding IP Cameras from the LAN:

Select the day to

playback.

Select channels to

playback.

Click inside the bar

to select a playback

time.

Using the Quick Menu

Right-click to open the Quick Menu.

Select camera/live display view

Control PTZ cameras (not included)

Adjust camera color and image settings

View system information

Start/stop sequence mode

Playback and search recordings

Open manual recording controls

Open Main Menu

Control auto focus cameras (not included)*

Add IP cameras over the LAN*

Disable current audible warning

8MP MPX Multiformat Digital Video Surveillance Recorder

M6100 Series

Quick Connection Guide

When using your system for the ﬁrst time, you will be

prompted to create a new 6 character password.

1. Connect your system according to the instructions

on the front of this guide.

2. When the DVR turns on, create and conﬁrm your

new, secure password. This password will be used to

connect to your system from now on.

Creating a New Password

Record your password below and

store in a secure place:

1. Connect the camera to a router or switch on the same network as the DVR.

2. Right-click and select Remote Device. Log in using

the system user name (default: admin) and your new,

secure password.

3. Click Device Search.

6. Right-click to return to live view.

4. Check the camera(s) you would like to add.

5. Click Add. The Status indicator turns green to show

the camera is successfully connected.

NOTE: If the Status indicator is red, click .

Update the camera user name, password,

ports, and manufacturer as needed.

1. LEFT-CLICK:

• During split-screen display mode: Click an individual channel to view it in

full-screen. Click again to return to the split-screen display mode.

• While navigating menus: Click to open a menu option.

2. RIGHT-CLICK:

• During live view: Right-click anywhere on the screen to open the Quick

Menu.

• Within system menus: Right-click to exit menus.

3. SCROLL WHEEL:

• During live view: Use the scroll wheel to zoom in / out.

Using the Mouse

NOTE: In live view, hover the mouse cursor over the bottom of the screen to

open the Navigation Bar. Move the mouse cursor away from the bottom of the

screen to close the Navigation Bar.

* IP cameras only. To access these menu options, Cable Type must be set to IP for at least one

channel. See Adding Cameras from the LAN.

ATTENTION:

The M6100 Series Multiformat DVR is compatible with HD CVI / TVI / AHD, SD analog, and FLIR Visible

IP cameras. The maximum compatible camera resolution is 8MP. For more information about camera

compatibility, visit ﬂir.com/security/pro.

Model

SD / HD

analog channels*

Additional

IP channels

Total

channels

8-channel

4 12

16-channel

8 24

FLIR M1644K84 User guide

Brand: FLIR

Model: M1644K84

Category: Digital Video Recorders (DVR)

Type: User guide

This manual is also suitable for

Download PDF

report

FLIR M1644K84 User guide

This manual is also suitable for

FLIR M1644K84 User guide

Related papers

Other documents