Kohler R2714-4-0 Dimensions Guide

Kohler
Brand
Kohler
Model
R2714-4-0
Category
Kitchen sinks
Type
Dimensions Guide

This manual is also suitable for

Kohler R2714-4-0 is a top-mount, single-bowl kitchen sink made from 18-gauge stainless steel. It has a 36-inch minimum base cabinet width and a 9-inch depth. The self-trimming apron overlaps the cabinet face for easy installation, and the apron height allows the sink to be used in most standard cabinetry or retrofitted to existing standard cabinetry. It has a single faucet hole and a rear drain, which increases workspace in the sink and storage space underneath. The sink also features SilentShield® sound-absorption technology for quieter performance.

Kohler R2714-4-0 is a top-mount, single-bowl kitchen sink made from 18-gauge stainless steel. It has a 36-inch minimum base cabinet width and a 9-inch depth. The self-trimming apron overlaps the cabinet face for easy installation, and the apron height allows the sink to be used in most standard cabinetry or retrofitted to existing standard cabinetry. It has a single faucet hole and a rear drain, which increases workspace in the sink and storage space underneath. The sink also features SilentShield® sound-absorption technology for quieter performance.

Features
•
36-inch minimum base cabinet width.
•
Single bowl.
•
9-inch depth.
•
Self-Trimming apron overlaps the cabinet face for easy
installation.
•
Apron height allows sink to be used in most standard cabinetry
or retrofitted to existing standard cabinetry.
•
Single faucet hole.
•
Rear drain increases workspace in the sink and storage space
underneath.
•
SilentShield
®
sound-absorption technology offers quieter
performance.
•
Includes installation hardware and compatibility template.
Codes/Standards
Material
ASME A112.19.3/CSA B45.4
•
Handcrafted from 18-gauge stainless steel.
Lifetime Limited Warranty for
KOHLER
®
Stainless Steel Sinks
Installation
•
Top-mount apron-front.
See website for detailed warranty information.
Recommended Products/Accessories
K-6474 Sink Rack
K-6377 Sponge Caddy
K-6378 Kitchen Brush Caddy
K-6379 Kitchen Squeegee
K-6382 Disinfecting Wipes Dispenser
K-6383 Soap Dispenser
K-8618 Paper Towel Holder
K-8619 Flexible Kitchen Mat
K-8801 Sink Strainer
K-8799 Sink Strainer
K-8624 Dish Scraper
Optional Products/Accessories
K-6429 Utility Rack
Included Components
Product consists of:
1130570 Hardware Kit, Self-Rimming
1173293 Hardware Kit, Side Clip
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-16-2019 14:50 - US/CA
Vault
™
Top-mount Apron Front Kitchen Sink
K-3942-1
17-7/8" (454 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
SingleBowl configuration:
NOTICE: Countertop manufacturer or cutter must
use the cut-out template provided with the
Top-mountInstallation:
36" (914 mm)Min. base cabinet
width:
product, or a current one provided by Kohler Co.
(call 1-800-4-KOHLER). Kohler Co. is not
responsible for cutout errors when the incorrect
cut-out template is used.
Length: 32-1/2" (826 mm)
Width: 17-3/16" (437 mm)
Bowl depth: 9" (229 mm)
Bowl area (Only):
IMPORTANT! The distance from the top edge of
the cabinet to the top of the cabinet door must be
at least 8-3/8" (213 mm) to install this sink.
1Number of deck holes:
1-7/16" (37 mm)Faucet hole(s):
3-5/8" (92 mm)Drain hole:
1166717-7, required, included
1178341, required, included
Template:
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-16-2019 14:50 - US/CA
Vault
™
Top-mount Apron Front Kitchen Sink
K-3942-1
  • Page 1 1
  • Page 2 2

Kohler R2714-4-0 Dimensions Guide

Kohler
Brand
Kohler
Model
R2714-4-0
Category
Kitchen sinks
Type
Dimensions Guide
This manual is also suitable for

Kohler R2714-4-0 is a top-mount, single-bowl kitchen sink made from 18-gauge stainless steel. It has a 36-inch minimum base cabinet width and a 9-inch depth. The self-trimming apron overlaps the cabinet face for easy installation, and the apron height allows the sink to be used in most standard cabinetry or retrofitted to existing standard cabinetry. It has a single faucet hole and a rear drain, which increases workspace in the sink and storage space underneath. The sink also features SilentShield® sound-absorption technology for quieter performance.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents