Commercial Electric B4684CW002 User manual

Brand
Commercial Electric
Model
B4684CW002
Type
User manual

This manual is also suitable for

HOMEDEPOT.COM
Please contact 1-877-527-0313 for further assistance.
Item #192 486
Model #XXXXXX
Use and Care Guide
Surface Mount Ethernet Jack
Installation
1. For non-modular conversions, remove all
connections down to the main wire and
remove 1/2 of the foam insulation from
the color wire leads.
2. Gently pry the cover off at the notches on
the side with a small screwdriver.
3. Loosen the screws (1) on the block and
connect each of the color-coded wires to
the corresponding color wire terminal on
the block. See the Pin Connections table
below. Retighten the screws (1) to secure
the wire connections together.
4. Secure the wiring block to the wall
receptacle using screws (AA) or foam
tape (not included). Then snap the jack
cover back into place over the wiring
block.
G
Y
B
R
WH
B
L
O
R
K
B
R
D
S
L
1
AA
NOTE: Most networks use the T-568-B Standard.
Pin Wall Plate Color TerminalT-568B Standard T-568A Standard
1 Blue White/Orange White/Green
2 Orange Orange Green
3 Black White/Green White/Orange
4 Red Blue Blue
5 Green White/Blue White/Blue
6 Yellow Green Orange
7 Brown White/Brown White/Brown
8 White Brown Brown
  • Page 1 1

Commercial Electric B4684CW002 User manual

Brand
Commercial Electric
Model
B4684CW002
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents