SINGER 2500267 User manual

Brand: SINGER

Model: 2500267

Type: User manual

SINGER 2500267 makes sewing more manageable and enjoyable, thanks to its user-friendly design and impressive array of features. Perfect for beginners and experienced sewers alike, this versatile machine empowers you to bring your creative visions to life effortlessly.

With its sturdy construction and durable metal frame, SINGER 2500267 ensures long-lasting performance and unwavering reliability. Dive into a world of creative possibilities with 10 built-in stitches, including essential stitches like straight, zigzag, and blind hem, giving you the flexibility to tackle various sewing projects. Effortlessly switch between stitches using the conveniently located stitch selector dial.

Specialty Feet: Quarter Inch Foot

Quarter Inch Foot

The Quarter Inch Foot is most often

used for quilt piecing. The foot will

help you sew and create 1/4” seam

allowances. Quarter inch seam

allowances are also used when

sewing many small projects such

as crafts, doll clothes and more.

This foot has various markings on

the surface to aid with pivoting at

corners.

The Quarter

Inch Foot

IN MOTION

Specialty Feet: Quarter Inch Foot

Sewing with the Quarter Inch Foot

The Quarter Inch Foot is used for straight

stitch sewing only and is perfect for 1/4”

seams.

Accurate 1/4” seam allowances are

achieved with the Quarter Inch Foot

because the distance from center needle

opening to the right hand edge of the

foot is 1/4”.

When using the Quarter Inch Foot rst

check to be sure your SINGER® sewing

machine is set to straight stitch, center

needle position. Turn the handwheel

toward you slowly and check to see that

the needle clears the small opening in

the foot. If it does not clear the small

opening, use the stitch width control to

move the needle until it lines up with the

hole of the foot without hitting the foot.

Place your fabric under the presser foot

and align the raw edge of the fabric with

the right hand side of the presser foot

for an accurate 1/4” seamline. As you

begin sewing, hold the thread tails at the

back of the foot to keep them secure and

prevent thread tangling.

Specialty Feet: Quarter Inch Foot

Pivoting

The Quarter Inch Foot has horizontal

markings for multi-purpose uses in

sewing. The horizontal marking closest

to the front of the Quarter Inch Foot

is a 1/4” guide useful when pivoting

at a seamline corner with a 1/4” seam

allowance.

To pivot using the guideline at the front,

sew your seam up to the corner, but

stopping when the edge of the fabric

aligns with the 1/4” horizontal guideline.

Then, put the needle down in the fabric.

With the needle down in the fabric, raise

the presser foot, turn the fabric to sew

the remainder of the seam, aligning the

raw edge of the fabric with the right-

hand edge of the presser foot. Lower

the presser foot then continue sewing a

1/4” seam.

The remaining two horizontal markings

can also be used for pivoting. The

center horizontal mark is used for a 3/8”

seam and the horizontal mark closest

to the needle opening is used for a 1/2”

seam.

Sewing with the Quarter Inch Foot

SINGER 2500267 User manual

SINGER 2500267 User manual

SINGER 2500267 User manual

Related papers

Other documents