How to insert batteries (included)
How to change blade (additional blades sold separately)
1. Push the carriage
button over to open the
carriage.
2. Grasp the blade hub
and pull the hub out
with a gentle tug.
3. Set the hub of new blade
into the hub groove (inside
carriage), push into place
and close the lid.
blade style
F
28
mm
LED light
1. Raise and lower the cut rail to turn on the light.
2. Light will automatically shut off after two minutes of inactivity.
1. Turn the trimmer
upside down to view
the black battery
compartment located
beneath the cut rail.
2. Push in the lever
and lift up to remove
the battery cover.
3. Insert all three
batteries, negative
end first, into the
battery compartment.
4. Replace
battery cover.