Lionel Priming The Smoke Fluid Loader Owner's manual

Priming the Smoke Fluid Loader

If you hear the pump pulsing but it takes a long time for the drops to come out put your Smoke

Fluid Loader in program mode. Place an empty smoke fluid bottle or other suitable receptacle

under the boom to catch the smoke fluid. Pull down on the brake button on your Cab1, Cab2 or

Cab1-L controller to prime the pump. The pump will stream fluid out of the boom into your

waiting receptacle.

Once the pump is primed smoke fluid drops will come out right away.

Be sure you have enough smoke fluid in the tank for proper operation.